REPAIR TO FALSE CEILING WALL PANELING PLINTH PROTECTION RAIN WATER PIPE PVC STORAGE WATER TANK GI WORK AND ALUMINUM DOOR WINDOWS GUNITING KITCHEN LIVING AREA OF OR AND JCO ACCN AND OTM ACCN IN THE AREA OF AGE BR II UNDER GE WEST DELHI

Amount

M & L in reapirs powder coated mild steel false ceiling with 600mmx600mm with and including 'E' not less than 8 mm suitable size (as per sample) , fixed with and including galvanised iron powder coated inverted 'T' or 'L' section ( Concealed GI frame work ) of Cicage metallic or equivelent suspended from ceiling with provision of galvanised iron wire 4.5 mm dia centre to centre distance not less than meter and self tapping screws including butterfly clips, hold clips for fixing the boards to frame complete all as manufacture's instruction and all as . (a) Size of Main Tee - 39x24.7x0.8 mm (b) Size of Cross Tee - 29x24.7x0.8 mm (c )Size of wall angle - 22.2x22.2x0.65 mm (d) Butterfly clips (e ) Hold down clip (f) Size of grid 1.22mx0.61m (g ) Two coats oil bound distemper one side of board (h) Powder coating on exposed side of TEE/angle

Taking down wall panelling and similar works complete all as specified and direccted.

S & F solid PVC wall linining consisting of 5 mm thick wood grain PVC sheet incl of solvent cement and fixing at site on PVC frame asper specification and drawing .

S & F 5 mm thick PVC sheet fillet of width 35 mm thick wall paneling incl of fixing on to shelter make PVC frame as per specification and drawing.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with PTMT float valve, connection niple and including dismantling existing water tank complete all as specified anin SSr Part-I complete all as specified and direcetd.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with PTMT float valve, connection niple and including dismantling existing water tank complete all as specified anin SSr Part-I complete all as specified and direcetd.

M&L brick work built in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radiusand including demolition of brickwork and removal of rubbish beyond MOD land complete all as specificed and directed.

M&L Brick work with sub class 'B' brick staight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc and including demolition of brickwork and removal of rubbish beyond MOD land complete all as specificed and directed.

M & L in repairs double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminum alloy sheet foundations box main body with stainless steel cover govering pivet made of brass complete all as specificed and directed.

S & F in repairs brass body 4 lever mortice lock vertical type size 100 mm complete all as specified and directed.

S&F, Aluminium ( extruded section body) door closer hydraulically regulated, designation no : 3, universal type univer type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed

Taking down aluminium door and refixed to same opeing after repairing including necessary joining clips, glazing clips, rubber neoprene packing , hinges, alumimium snap beading , screws complete all as specifiedand directed.

M&L for machine cut kota stone slab flooring 18-20mm thick including moulding for nosing over cemnet screed bed 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing including roughning the stair PCC all as specified and dirceted

M&L for taking down cement plaster of any description on brick or concrete surfaces of wall or ceiling etc and 15 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:6, on brick work or concrete surfaces on wall and finished the surface even and smooth as whole or in patch and applying two coat s cement base paint over a coat alkali resistant primer and including removal of debries/rubbish off the premises out of MOD land complete all as specified.

M&L for taking down cement plaster of any description on brick or concrete surfaces of wall or ceiling etc and 15 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:6, on brick work or concrete surfaces on wall and finished the surface even and smooth as whole or in patch and applying two coats oil bound distemper over a primer and including removal of debries/rubbish off the premises out of MOD land complete all as specified and as directed.

M&L for 1 5 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:6,on brick or concrete surfaces of wall or ceiling etc, on brick work or concrete surfaces on wall and finished the surface even and smooth as whole or in patch and applying two coat s cement base paint over a coat alkali resistant primer and including removal of debries/rubbish off the premises out of MOD land complete all as specified and as directed.

M & L for 15 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:6, on brick or concrete surfaces of wall or ceiling etc, on brick work or concrete surfaces on wall and finished the surface even and smooth as whole or in patch and applying two coat s acrylic emulsion paints over a primer and including removal of debries/rubbish off the premises out of MOD land complete all as specified and as directed

Demolition of Plain cement concrete in ground floor and paving n.exc 15cm thick and removal of rubbish off beyond primeses of MOD land complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection using 40mm stone aggregate finised even & fair including making joints with bitumastic(1:1) complete all as specified and direceted

S& F in repairs coloured PVC coated MS drapery curtain rod 28mm dia and including decorative finials of ABS plastic for suitable dia and brackets complete all as specified and directed.

M & L for precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate ) for Man hole cover slab shelves, cooking plateform & similar articles with plain faces & set in cement mortar 1:4.

S&F Mild Steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending, hooking etc and binding with MS wire 0.9mm dia(annealed).

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm dia bore incl cutting chases if whereas required and including of taking down G I tubing complete all as specified and directed.

S&F GI tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia bore incl cutting chases if whereas required and including of taking down G I tubing complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down eaves gutter rain water pipe complete all as specified and directed.

S&F 110 mm PVC (SWR) bends/shoe any radius complete all as directed.

S&F 110mm stack clamp made out of 25 mm X 3mm flat iron and 12mm dia round iron stamp incl bolts and nuts and securing ends of stamp to walls or roof complete all as specified and directed.

Demoliton of stone slabs & tiles of any thickness in floors, aprons laid & bedded & pointed in any martor and removal of rubbish off beyond primeses of MOD land complete all as specified and directed..

M&L Non skid coloured ceramic tiles (400x400mm)x7 to 8 mm thick in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L glazed ceramic coloured tiles 300x450/300x600 mm 7 to8 mm thick in walls etc set and jointed in neat cement slurry and pointing in coloured cement, all as specified incl 10 mm thick in cement mortar (1:4) as screed plaster complete all as specificed and directed.

S & F 8 to 10 mm thick vitrified light shade tiles ( square/ rectangular) polished area of each tile not exceeding 0.36 sqm , in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specificed and directed.

S&F 20 mm thick granite work machine cut in floors over 15 mm thick in CM 1:6 incl bedded & pointing with white cement with admixture of pigment to match the shade of stone including cutting & polishing complete all as specificed and directed.

S&F 20 mm thick granite work (table rubbed and polished) on wall lining over 10 mm thick rendering in CM 1:4 incl pointing in white cement(1:2) using marble dust with admixture of pigment to match complete all as specificed and directed.

M&L 60 mm thick coloured & reflective type cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade, laid dry including 50 mm thick sand cushing & vibrating the pavers and joints filled with dry sand including dismantling of old paver block complete all as specified and directed .

M & L for Coloured Cement concrete Pre polished & reflective type chequered tiles 30cm X 30cm X 25mm thick machine pressed; set jointed and pointed in neat cement slurry in floors and cut and polished with white cement and pigment over 15 mm thick screed bed in cement mortor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan , white (Pedestal pattern) including PVC seat cover complete all as specified and directed.

M&L 100mm thick cement concerete 1:4:8 type B-2 using 40mm graded aggragete including finished rough surfaces without using extra cement complete all as specified and directed.

Complete removal of existing treatment from steel surface of trussess with mechanical grinder and applying two coats of synthetic enamel paint over a coat of primer including scaffolding wherever as reuired complete all as specified and directed.

M & L for framed work as in doors or gates of angle or other section, frame work for chajja with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. confirming to Fe 410-W (Gde-E-250) quality 'A' complete all as specified and directed.

S & F in repairs steel rolling shutters 1.25mm thick including top cover , anchoring rod, hasp and staple erection in position as indicated complete, gear operated type with bevel gear box and crank handle including guide rail, hood cover, MS pipe, spring, lock plate and necessary fittings and fixtures, bearing,lock including all necesssary arrangements complete all as specified and directed. Note : Painting shall be measured and paid for separately.

S & F for ball bearing for rolling shutters complete all as specified and directed.

S & F safety lever lock mild steel with 4 levers for rolling complete all as specified and directed.

S&F in repairs 8 to 10mm thick Acrylic sheet size 250mm radious fixed in bath room at cornerr as in shelves ,fixed with rawel plug & screws two nos each shelves complete all as specified and as directed.

S&F in repairs Acrylic sheet assembly consisting of 5mm thick Sheet shelf 12 cm wide with chromium plated backet guared and railing 45 cm long near WHB complete all as specificed and directed.

S&F in repairs tubular towel rail, 20mm dia, ‘D’ type 60cm long between flanges of brass CP complete all as specified and directed.

S&F in repairs viterous china squatting pan 'ORISSA Pattern' size 580x440mm white with integral foot rests incl P or S Trap)(excluding flushing cistern & flush pipe) complete all as specificed and directed.

S&F in repairs viterous china one piece closets along with P or S trap as required at site complete all as specificed and directed.

S&F in repairs vitreous china wash hand basins, white flat size 550x400mm incl br cuttingfor an pinning in ends of brackets or errecting stand complete all as specificed and directed.

Demoliton of reinforced cement concrete of any description & in any position not otherwise specifically provided complete all as specified and directed.

S&F in repairs PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any complete all as specified and directed.

S&F in repairs waste coupling of CP Brass ( half or full threaded). Dia of bore 32/40 mm for WHB/kitchen sink/urinals as specificed and directed.

S&F in repairs rain shower 5 flow CP brass shower rose fixed to 15mm pipe of swivel joint type complete all as specified and directed.

S&F in repairs fancy type pillar taps 15 mm, CP brass with capstan heads, screwed down high pressure, screwed for iron pipe and fixed. complete all as specified and directed.

S&F in repairs 15mm bore bib taps standard of Brass CP high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm bore bib taps long body standard of Brass CP high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F PVC connection 15mm dia and 45cm long with washers complete all as specified and directed.

S&F in repairs 15mm bore wall mixer single lever standard of Brass CP high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F 32mm/40mm dia and 75 cm long PVC waste pipe for WHB and sink complete all as specified and directed.

S&F in repairs MS grating CP 125 mm dia of approved make including fixing with CM to floor/nahani traps etc complete all as specified and directed.

S&F in repairs CI 75 mm floor trap with grating incl jointing to waste pipe fixed in cement concrete complete all as specified and directed.

S&F in repairs 15 mm bore angle stop valve C P cast copper alloy screwed down high pressure with single lever handle screwed both ends for iron pipe complete all as specified and directed.

All as per item No 62 but fancy type, CP with long shank and cup conceal type.

S&F in repair CI branch piece single (equal or unequal) 100 mm ordinary or inverted (spigot or socket type) or with paralled branches with oval access door complete all as specified and directed.

S&F in repair CI branch piece single (equal or unequal) 75 mm ordinary or inverted (spigot or socket type) or with paralled branches with oval access door complete all as specified and directed.

S&F in repairs 100 mm CI bends (any radius) diminishing pieces or taper (large base measured) with oval access door complete all as specified and directed.

S&F in repairs 75 mm CI bends (any radius) diminishing pieces or taper (large base measured) with oval access door complete all as specified and directed.

S&F in repair 100 mm CI soil waste and vent pipe in any length with or without ears with connecting joints laid in trenches or in floor or fixed to walls complete all as specified and directed.

All as per item No. 68 here in before but 75 mm.

S&F 75mm stack clamp out of 25 mm X 3mm flat iron and 12mm dia round iron stays incl bolts and nuts and securing ends of stay to walls or roof complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Chennel having a PVC sheet strip of 20 MM width stuckin side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gep insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolt of extruded section complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, febricated typed , anodised complete all as specified and directed.

S&F 100 mm long stainless steel Butt hinges medium weight fixing with stainless steel screw complete all as specified and directed.

M&L for framed work such as grills, grating etc with ends of bars shouldered or riveted or forged into spikes framed guard bars and similar work confirming to Fe - 410-0 or Fe - 310 - 0 including dismantling of mild steel work of any description complete all as specified and directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm but nexc 4 sqm each complete all as specified and directed.

Taking down wooden shutters of any description n. exc 2 sqm each complete all as specified and directed.

S&F 2nd class 35 mm thick hardwood gauzed and skelton shutters open rebated and prepared to receive glass / gauze etc ( with or without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I section 8 clause 8.24(a) complete all as specificed and directed

S&F flush shutter solid core 30 mm thick constructs with block board and plywood face commerical type on both side complete all as specificed and directed

S&F 2nd class hardwood 35 mm th plain framed panelled shutters ( any number of panels) with panels of timber flat on both sides / feather edges) of of veneered particle board medium density wood particle board with commercial face veeners complete all as specificed and directed.

S&F 300mm long aluminium anodised door bolts, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed.complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane including fixing upto second storey building window with necessary stair arrangement and safety arrangement to fixing upper glass panes shall deemed to be included in the rate and hacking out old broken glass, punching or drilling out old glazing pins/spring clips and providing and fixing new onesand rubbish off premises of MOD land complete all as specified and directed.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including fixing upto second storey building window with necessary stair arrangement and safety arrangement to fixing upper glass panes shall deemed to be included in the rate and hacking out old broken glass, punching or drilling out old glazing pins/spring clips and providing and fixing new onesand rubbish off premises of MOD land complete all as specified and directed. complete all as specified and directed.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples fixed in wooden or steel frame complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs Vitreous China urinal, half stall type white of complete including providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws , pointing around urinal back in cement complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 89530.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

DR Buildcon

M/S DSSP Construction Co.

Vipul Construction

M/S Yamin

GROUP OF ENGINEERS

M/s M M BAHL