Canal water based Water supply project for Construction of 3.0 MLD WTP and other related works including of 5 years operation and Maintenance at Lohian Khas Town Distt. Jalandhar, under AMRUT 2.0 Scheme.

Canal intake :

Raw water transmission main :

Raw water S & S tank :

Raw water sump and Pumping station :

Water Treatment Plant

Chlorine Contact Tank :

Clear water reservoir, CWR Sump, Pumping station and Panel Room

Clear water transmission main

Distribution line within WTP premises : DI K-7 100 mm.i/d, L =50.0 m and uPVC 40 mm.i/d. Length = 250.0 m

WTP boundary wall

Sub Total - A : Civil works + WTP

Intake Pumping Station

Raw Water Pumping Station including Floating Arms

S & S Tank - Dewatering Pumps

Clear Water Pumping Station

CI Thimble Mounted Sluice Gate for outlet of CWR

Sub Total - B : Mechanical works

Intake Pumping Station

Raw Water Pumping Station

Clear Water Pumping Station

Sub-Station for Raw & Clear water Pumping Station and WTP

SCADA for Intake, Raw Water & Clear Water Pumping Station, WTP & Sub-Station

Sub Total - C : Electrical, Instrumentation & SCADA Works

Capital Works : (A + B + C) (Civil + WTP + Mechanical + Electrical, Instrumentation & SCADA)

Provisional Sum (Not Part of Bidding) (Rs. in Lakhs)

Provisional Sum

(A) Provisional Sum (Capital Cost) :

Price Escalation = 3.75 % of Capital Cost ( @ 7.50 % per annum and average 3.75% per year)

Contingencies = 5% of Capital Cost (L.S)

Shifting of Utilities ( Electric Poles,W/S.and Sewerage Pipeline,Other Service Utilities)

Permission for BT bill :

Forest dept.

PWD B&R (RWR & CWR) : Road Type BT: [email protected]/- per sqm

W.R.D. deposit work charges for providing Raw Water and Construction of Cross regulator if there is no existing cross regulator.

Railway Crossing

Electrical connections charges :

Intake Pumping station

Sub Station

Sub Total (A) Provisional Sum

(B) PWSSB Charges and Cess :

Contingencies Charges on work @ 1% ( To be paid on actual limited to maximum @ 1% of Capital cost)

PWSSB Charges @ 6 % on Capital Cost

Cancer Cess @ 1% ( For works more than 15 Crore)

Sub Total (B) PWSSB Charges and Cess

Provisional Sum (Not Part of Bidding)

CIVIL WORKS

RCC Valve Chamber near Canal

Earthwork in excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Extra depth excavation : > 1.50 m.

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 60 m.

Rate for loading :

Rate for loading into wagons,trucks or boats within 15 metres lead.

Carriage of Earth :

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters.

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or Battering.)

C / shuttering :

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / shuttering :

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

CI-D Joint :

Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete

GI Pipe : ( Rising pipe for Valve Operation)

Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete.

Diff.in Rates of Materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of Materials :

Bajri :

From Mirthal 134 km

Coarse sand :

From Lohand Khad 178 km

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Puddle Collar :

RUIDP SOR 2022-23 Code No. 19.63

250 mm.dia.

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (1) (i): CSR + Non CSR Amount : ( Rs)

Rising Main up to Raw Water Channel

1. Capital Works CSR based Items

Excavation : ( Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-7 Pipes :

Pipe lines laid complete.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects.

Capital Works ' CSR based Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (1) (ii) : CSR Amount : ( Rs)

Raw Water Channel

1. Capital Works CSR based Items

Excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth :

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading :

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Shuttering : ( Raft foundation)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C /shuttering : (Platform slab for operation of Manual screen)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending and placing in position complete.

Safety foot rest :

Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230 x150 x75 cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.

MS Railing for Operation platform Bar screen :

Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

CI-D Joint :

Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete

GI Pipe : ( Rising Pipe for Valve Operation)

Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete.

Diff. Rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC

Carriage of materials :

Bajri :

From Mirthal 134 km

Coarse sand :

From Lohand Khad 178 km

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Puddle Collar :

RUIDP SOR 2022-23 Code No. 19.63

200 mm.dia.

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (1) (iii) : CSR + Non CSR Amount : ( Rs)

RW Intake Sump, Intake Pumping Station, RWR panel Room, Pumping Machinery Room ( BGL) and Meter room

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : (Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

M-30 : Plinth level

M-30 : Plinth level > 4.0 m

Shuttering : ( Raft foundation)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height : ( Walls)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering : (Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height : ( Columns)

C / Shuttering : (Slab)

Steel :

PVC Foot Steps :

Note : PVC foot Steps are provided at ( 1+1=2) locations

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Brick masonary work (1:5) : ( H = 4.0 m)

Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m )

Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m )

Cement concrete 1:2:4

Extra height Concrete :

Above 4.0 m.height : ( 4.0 - 5.0 m)

Above 4.0 m.height : ( 5.0 - 6.0 m)

Steel :

C / Shuttering : (Columns)

C / Shuttering > 4.0 m.height : ( Columns)

C / Shuttering > 4.0 m.height : ( Columns)

C / Shuttering > 4.0 m.height : ( Columns)

C/shuttering :

C / Shuttering > 4.0 m.height :

C/shuttering : ( Lintels)

CP 12.5 mm.thk. : (1:4)

CP 12.5 mm.thk. : (1:2)

White washing :

Preparation of plastered surface :

Distempering :

Oil Bound Distemper :

Earth filling under floors :

Ironite flooring:

CC 1:4:8 Base for Ironite flooring:

Cement concrete 1:4:8

Steel windows and Ventilators :

Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.

Fixing :

Glass panes :

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Doors Shutter :

Aluminium Fittings :

Cost of Aluminium fittings complete for doors,windows such as tower bolts,handles,Stoppers and screw etc.for these fittings.(Excluding sliding bolt)

Steel Chowkats :

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.

Rolling Shutter :

Parapet Wall :

CC 1:2:4 : (Coping)

Cement concrete 1:2:4

CC gola :

Top Khurra :

Bottom Khurra :

Drip Course :

Dry Brick edge paving :

CI Rain water pipes :

CI head :

CI shoes :

Embedding of CI Rain water pipes :

Excavation :

Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around

Cement concrete 1:2:4

M-30 : Plinth level

Steel :

Brick Masonary work in cm 1:5 : (plinth level)

Difference rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks : ( / 1000 nos)

From Jalandhar

Steel

Extra rate for OPC

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Fine sand : 65 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (1) (iv) CSR Amount : (Rs)

Toilet Block

1. Capital Works CSR based Items

Centring and shuttering for parapet, fascias and other similar items including edges.

For Slab

14guage section (1.75"x4") weight 1.77 kg per Mtr.

14guage section (1.75"x4") weight 1.22 kg per Mtr.

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-inCharge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge.

CPVC SDR 11 Pipe & fitting 20mm o/d

CPVC SDR 11 Pipe & fitting 40mm o/d

Coarse Sand

From 165 Km.

Stone Metal 40mm gauge

From 165 Km.

Coarse Aggregate

From 165 Km.

Fine sand : 65 Km.

Difference in Rates of materials

Coarse Sand

Stone Metal 40mm gauge

Coarse Aggregate

Bricks :

From Jalandhar

Steel

Extra rate for OPC Cement

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (1) (v) : CSR Amount : (Rs)

Septic Tank with Soak Pit

1. Capital Works CSR based Items

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

Note : PVC foot Steps are provided at ( 1 location)

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

C / Shuttering : (Slab)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Slab 8.25 sqm/cum

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

Supplying, fixing and jointing PVC / H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.

Plaster

12.5 mm thick cement plaster 1:4

With F.P.S. bricks

Coarse Sand

From Lohand Khad 178 km

Stone Metal 40mm gauge

From Mirthal 134 km

Coarse Aggregate Bajri

From Mirthal 134 km

Fine sand : 65 km

Difference in Rates of materials

Coarse Sand

Stone Metal 40mm gauge

Coarse Aggregate Bajri

Bricks :

From Jalandhar

Steel

Extra rate for OPC

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

CI Ventilator Cowl :

Chhattisgarh CSR June 2020 Item no.26.3

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (1) (vi) CSR + Non CSR Amount : ( Rs)

Platform for Transformer

1. Capital Works CSR based Items

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines

12.5 mm thick cement plaster 1:4

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc

1.2 Meter High G.I.Barbed Wire fencing

Wrought iron & Mild steel ladders, framed grills,gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint f in all shades on wood work, metallic or plastered concrete surface to give an even shade .

Structural steel work in girders or Stanchions built up of one joist / or channel section. Riveted including cutting and fixing old gusset plates bolts, Nuts, Rivets etc. complete with flange plates, head, sole plates, angle connections etc. with hoisting & erecting in position

For Transformer ISMB 150x75x5 @ 11.38kg/m

Coarse Sand

From 165 Km.

Stone Metal 40mm gauge

From 165 Km.

Coarse Aggregate 20/25mm

From 165 Km.

Fine sand : 65 Km.

Difference in Rates of materials

Coarse Sand

Stone Metal 40mm gauge

Coarse Aggregate 20/25mm

Bricks :

From Jalandhar

Structural Steel

Steel

Extra rate for OPC

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

RUIDP SOR 2023 1330

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (1) (vii) : CSR + Non CSR Amount : ( Rs)

Construction of Bituminous Road

1. Capital Works CSR based Items

Earthwork :

Earth work excavation in ordinary soil exclusive of compensation of earth

Compacting Original Ground below embankment :

WBM Grade-II :

WBM Grade-I:

Carriage of materials :

Carriage of stone aggregate : (For WBM)

Bhartgarh (Ropar)

CSR ref.

For stone metal :

Prime coat

Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm complete as per technical clause 502 of MORT&H specifications.

Tack coat

Surface dressing :

Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1 kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 510 of MORTH & H specifications.

Open graded pre mix surface :

Seal coat type B :

Carriage of materials :

Carriage of stone aggregate : (For Surface dressing & Open graded pre mix surface) Crushed Bajri (12.5 / 13.2 mm ) :

Lohand Khad

Carriage of stone aggregate : (For Surface dressing & Open graded pre mix surface) Crushed Bajri (10.0 / 11.2 mm ) :

Lohand Khad

Coarse sand :

Carriage of Coarse sand : (For seal coat type-B)

Lohand Khad

CSR Ref.

For stone metal

Carriage of materials :

Carriage of Bitumen : Round the Trip lead is considered from Panipat Refinery.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (1) (viii) : CSR Amount : ( Rs)

Intake Boundary wall

1. Capital Works CSR based Items

Excavation :

Excavation in Soil ( any type) using hydraulic Excavator CK 90 with hydraulic excavator of 0.90 cum bucket capacity,including,cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead up to 30 m.

Cement concrete 1:2:4

Reeinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding,placing in position complete.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam ( vertical or battering )

C / shuttering : ( Columns)

Centering and Shuttering for columns ( square or rectangular or poly gonal in plan)

C / shuttering : ( Beams)

Centering and Shuttering for columns ( square or rectangular or poly- gonal in plan)

115 mm.thk.BBM :

115 mm. thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure.

CP 20 mm.thk. :

20 mm.thick cement plaster 1;4 in two coat work

White wash :

White washing ( Three coat)

Dry distemper :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

Sliding Shutters :

Providing and fixing G.I. Sheet 0.80mm thick sliding shutters with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates at the junctions, hooks at top and 25mm dia pulleys at bottom and 40mmx40mmx25mm dia pulleys at bottom and 40mx40mmx6mm angle iron top and bottom guides including locking arrangement with handles etc. complete.

Diff.in Rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Jalandhar

Steel

Extra rate for OPC Cement

Carriage of Materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Barbed wire fencing :

1.2 Meter High G.I.Barbed Wire fencing

NS Item

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (1) (ix) : CSR + Non CSR Amount : ( Rs)

Raw Water Transmission : DI K-7

1. Capital Works CSR based Items

Excavation : ( Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Dia.i /d mm.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-9 Pipes :

Pipe lines laid complete.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects.

Scour Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

Sluice Valves flanged.(mm.i/d)

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

Valve chambers :

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

Difference rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Jalandhar

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From Mirthal 134 km

Coarse sand :

From Lohand Khad 178 km

Fine sand : Dharmkot 65 km

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Air Valve :

Based on PHED Rajasthan 2023 Code no.6.6

Class PN 1.0

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (2) (i) CSR + Non CSR Amount : ( Rs)

Canal Crossing 20m wide -RWR

1. Capital Works CSR based Items

Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position

Applying priming coat with metal primer on new steel or iron work including prepartion of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Excavation :

Excavation in Soil ( any type) using hydraulic Excavator CK 90 with hydraulic excavator of 0.90 cum bucket capacity,including,cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead up to 30 m.

Cement concrete 1:2:4

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam ( vertical or battering )

Diff.in Rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Extra rate for OPC Cement

Structural Steel MS Iron,Tees and angles

Carriage of Materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (2) (ii) CSR Amount : ( Rs)

Dismantling and Road Restoration Works (RWR)

1. Capital Works CSR based Items

Dry Brick :

Dismantling brick or flagged stone flooring without concrete base.

Taking out existing CC interlocking paver blocks from footpath/ central verge/pavement,including removal of rubbish etc., disposal of unserviceable material to the dumping ground,for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge.

Restoration of CC.Road Base course : CC.1:8:16

Cement concrete 1:8:16

At Through Rate : 40%

Through Rate without stone aggregates cost: 60%

Sand Qty :

CSR based Item

Providing and filling fine sand grading as per specifications or other locations etc. complete as per direction of Engineer-in-charge.

Carriage of materials :

Carriage of material : (For CC.1:2:4 & 1:8:16)

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Fine sand : 65 Km.

CSR Ref.

From 165 Km.

From 165 Km.

Interlock Paver Block :

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade manufactured by block making machine equipped with steel mmould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63-2014 and of approved size and design / shape laid in Ordinary Grey Colour and patteren over and including 40 mm thick compacted bed of coarse sand,filling the joints with fine sand etc. all complete as per directions of Engineer-in-charge.

At Through Rate : 30%

At Labour Rate : 70%

Dry Brick Paving :

First class dry brick on edge flooring or paving in ordinary bonded courses or in herring bond or other special courses or bond, laid as described in item no. 29.22. Description of Item no.29.22 : First class dry flat brick flooring and paving in ordinary bonded courses or in herring bond or other special courses or bond laid to template over rammed and dressed foundations and to correct longitudinal and cross slopes as shall be required by the Engineer-in-Charge.All joints shall be throughly filled with dry sand grouting which shall be applied to a thickness of not less 20 mm. over the surface of the flooring and brushed in to the joints.All joints shall be fully filled with sand.

At Through Rate : 30%

At Labour Rate : 70%

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (2) (iii) CSR Amount : ( Rs)

Raw Water Storage and Sedimentation (S &S ) Tank with Ramp

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Re-use of earth :

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

6.0 - 7.0 m ( Jack pully coloumns)

Shuttering : ( Raft foundation - S & S tank)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( Walls - S & S tank)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height : ( Walls - S & S tank) ( 4.0 - 5.0 m)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height for every additional height of 1 metres or part thereof.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

C / Shuttering : (Columns - Ramp)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering : (Columns - Ramp)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering : (Beam)

Centering and shuttering for sides and soffits of beam,beams,launching girders,bressumers,lintels.

C / Shuttering : (Slab - Ramp)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Sliding Shutters : ( At Ramp Approach)

Providing and fixing G.I. Sheet 0.80mm thick sliding shutters with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates at the junctions, hooks at top and 25mm dia pulleys at bottom and 40mmx40mmx25mm dia pulleys at bottom and 40mx40mmx6mm angle iron top and bottom guides including locking arrangement with handles etc. complete.

Difference in Rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of Materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (3) (i) CSR Amount : (Rs)

Raw Water Inlet Chamber to S & S Tank : 2.0 x 1.20 x 2.60 m ( I / dimn )

1. Capital Works CSR based Items

Earthwork in excavation : (Mechanically)

Earthwork in excavation for storage and sedimentation tanks,high level tanks, filter beds, clear water reservoirs, pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon, Trucks or boats within 15 meters lead.

Cement concrete 1:2:4

M-30 : (plinth)

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering : ( slab)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

CI-D Joint :

Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

GI Pipe : ( Rising Spindle for Valve Operation)

Providing, laying, jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Puddle Collar :

RUIDP SOR 2022-23 Code No. 19.63

250 mm.dia.

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (3) (ii) CSR + Non CSR Amount : ( Rs)

Raw Water Inlet Chamber to S & S Tank : 1.20 x 1.0 m x 2.60 m ( I / dimn )

1. Capital Works CSR based Items

Earthwork in excavation : (Mechanically)

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : (Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

M-30 : (plinth)

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering : ( slab)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

CI-D Joint :

Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

GI Pipe : ( Rising Spindle for Valve Operation)

Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Puddle Collar :

RUIDP SOR 2022-23 Code No. 19.63

250 mm.dia.

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (3) (iii) : CSR + Non CSR Amount : ( Rs)

S & S Tank Outlet Chamber to Pump House : 2.50 x 1.50 x 4.10 m ( I / dimn )

1. Capital Works CSR based Items

Earthwork in excavation : (Mechanically)

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 meters or part thereof.

C / Shuttering : ( slab)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

CI-D Joint :

Supplying and fixing of ISI Marked CI D - Joint ( completewith nut,bolts & rubber ring) as per IS 8794 for repair of pipe line,including,cutting,jointing and testing etc.but excluding cost of excavation complete

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

GI Pipe : ( Rising Spindle for Valve Operation)

Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Puddle Collar :

RUIDP SOR 2022-23 Code No. 19.63

250 mm.dia.

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (3) (iv) : CSR + Non CSR Amount : (Rs)

Raw Water Sump, Pumping Machinery Room, Panel Room & Store Room

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

M-30 : Plinth level

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

M-30 : Plinth level > 4.0 m

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Shuttering : ( Raft foundation)

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height : ( Walls)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height : ( Walls)

C / Shuttering : (Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering : (Slab)

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

Note : PVC foot Steps are provided at 2 locations

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer in charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Brick masonary work (1:5) :

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.

Brick masonary work (1:5) : > 4.0 m.

Brick masonary work (1:5) : 4.0 - 6.0 m

Cement concrete 1:2:4

CC 1:4:8 : ( Below Ironite flooring)

Cement concrete 1:4:8

Damp proof course 4 cm. thick of cement concrete 1:2:4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm.laid hot and sanded.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixture as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in superstructure.

Extra height Concrete :

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Above 4.0 m.height :

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding,placing in position complete.

C / Shuttering : (Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height : ( Columns)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

> 4.0 m.height :

C/shuttering : ( Lintels)

Centering and Shuttering for sides and soffits of beam,beams,launchings,girders,bressumers,lintels.

CP 12.5 mm.thk. : (1:4)

12.5 mm.thick cement plaster 1:4.

CP 12.5 mm.thk. : (1:2)

12.5 mm.thick cement plaster 1:2 .

White washing :

White washing (Three coat)

Preparation of plastered surface :

Prepartion of plastered surfaces for distempering including surface,applying filling with approved quality filler consisting of plaster o Paris and chalk mitti,including finishing the surface to the required finish complete.

Distempering :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Oil Bound Distemper :

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade.

Earth filling under floors :

Ironite flooring:

50 mm.thick ironite ( Metallic floor hardner to be mixed with Granolithic topping for heavy duty floors ) floor consisting of 40 mm.thick cement concrete 1:2:4 base and top layer 10 mm. thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6 mm gauge by volume finished smooth with hard rubbing.

Steel windows and ventilators :

Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.

Fixing :

Fixing steel windows in walls with lugs,embedded in 15 cm x 12 cm x 7.5 cm. of cement concrete block of 1:2:4 mix,including,cost of cement concrete for lugs.

Glass panes :

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Rolling Shutter :

Parapet Wall :

115 mm. thick brick wall laid in cement sand mortar 1:4 without reinforcement in superstructure.

CC 1:2:4 : ( coping )

Cement concrete 1:2:4

Cement Concrete 1:2:4 gola :

Cement concrete 1:2:4 gola 10 cm.x 10 cm. concave quadrant along junction of roofs with parapet wall finished smooth,where specially specified.

Top Khurra :

Top khurra 0.6 m. x 0.6 m. for rain water pipe in 25 mm.thick cement concrete 1:2:4 over 50 mm.thick cement concrete 1:8:16.

Bottom Khurra :

Bottom Khurra on ground 1.2 m x 0.6 m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm.cement concrete 1:8:16, including 12.5 mm. thick cement plaster 1:3

Drip Course :

Providing 75 mm.first class brick drip course at junction of roof and walls laid in cement sand mortar 1:4 including dressing of bricks.

Dry Brick edge paving :

Dry brick on edge paving sand grouted over 50 mm. thick earth and mud plaster.

CI Rain water pipes :

Providing and fixing cast iron 100 mm dia, rain water pipe with screw and wooden plugs fixed on wall-face, including filling joints with spun yarn and cement mortar 1:2 excluding head and shoe etc.

CI head :

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall-face including filling the joints with spun yarn and cement mortar 1:2.

CI shoes :

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.

Embedding of CI Rain water pipes :

Embedding 100 mm.C.I.rain water pipe non-pressure I.S.I. Mark pipe in cement mortar during masonary work.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Excavation :

Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Brick masonary work in cm 1:5 :

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks : ( / 1000 nos)

From Jalandhar

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Fine sand : 65 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (4) (i) : CSR + Non CSR Amount : (Rs)

Water Treatment Plant 3.0 MLD Capacity (22 Hrs @136.36 KLH)

1.Capital Works ' NON CSR based Items

13.2.1 PHED, Raj. BSR (2023-24)

Sub-Total Part - A (5) (i) : Non CSR Amount : (Rs)

Mixing Chamber to CWR : 2.00 x 1.50 x 5.40 m ( I / dimn )

1. Capital Works CSR based Items

Excavation : (Mech.)

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

M-30 : Plinth level > 4.0 m

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height : ( walls)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering : ( slab)

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

RCC Manhole cover with frame :

Providing & fixing 560 mm.,500 mm and 450 mm.i/d.circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS : 12592 -2002,including carriage from the atores of the Engineer -in -charge to site of work,loading,unloading,including stacking and setting the same to correct lines over manholes,including cement concrete copping ( M-20) around the frameetc.Dia. of steel for lifting hook is 16 mm.( for EHD and HD)

Food Grade Epoxy Paint Work :

Prepartion of Concrete surface :

Prepartion of plastered or concrete surface for painting ( including sand papering the surface),using ready mixed cement based wall putty by applying two or more coats to get required fnish.

Cement Primer :

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface.

Difference in rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Providing and Applying Food grade Epoxy based water proof coat :

Telengana CSR 2023 - 24 Buildings ( Part -III ) Sl.no.886 / TBSC - Q -VII -12

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (6) (i) : CSR + Non CSR Amount : (Rs)

Inlet Valve Chamber to CWR : 2.50 x 1.50 m x 3.95 m ( I / dimn )

1. Capital Works CSR based Items

Earthwork in excavation : (Mechanically)

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 16 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

PVC Foot Steps :

Providing orange colour safety footrest of minimum 6 mm. thick plastic encapsulated as per IS : 10910 on 12 mm. dia.steel bar conforming to IS : 1786 having minimum cross section as 23 mm. x 25 mm. and over all minimum length 263 mm. and width as 165 mm.with minimum 112 mm.space between protured legs having 2 mm.tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm.as per stanard drawing and suitable to withstand the bend rest and chemical resistance test asper specifications and having manufactureers permanent identification mark to be visible even after fixing ,including fixing in manholes with 230 x 150 x 75 cm. cement concrete block 1:2:4 ( 1 cement : 2 sand : 4 stone aggregate) complete as per design.

Pre Cast Slab Cover :

Rate analsysis attached based on CSR

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

DI K-7 Pipes :

Pipe lines laid complete.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects.

GI Pipe : ( Rising Pipe for Valve Operation)

Providing,laying,jointing,fixing and testing ISI Marked G.I.Pipe ( as per IS 1239 ) B -Class,including cost of specials ( such as tees,bends,sockets,elbows,etc.) painting with anti corrosive bitumastic paint,testing,cutting,threading Inside building complete.

Diff. rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (6) (ii) : CSR Amount : (Rs)

Chlorine Contact Tank

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plain)

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

Pre Cast Slab Cover over Chamber :

Rate analsysis attached based on CSR

Food Grade Epoxy Paint Work :

Prepartion of Concrete surface :

Prepartion of plastered or concrete surface for painting ( including sand papering the surface),using ready mixed cement based wall putty by applying two or more coats to get required fnish.

Cement Primer :

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Steel

Extra rate for OPC

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Providing and Applying Food grade Epoxy based water proof coat :

Telengana CSR 2023 - 24 Buildings ( Part -III ) Sl.no.886 / TBSC - Q -VII -12

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (6) (iii) : CSR + Non CSR Amount : (Rs)

Clear Water Reservoir, Pumping Machinery Room and Panel with Meter Room

1. Capital Works CSR based Items

Earthwork excavation :

Earthwork in excavation for storage and sedimentation tanks,high level tanks,filter beds,clear water reservoirs,pump houses,sumps,screening chambers and other similar works having straight or open cuttings in foundation trenches etc. with 3D Excavator,JCB including manuially dressing of bed,trimming of sides and side slopes to full dimension and depth as shown on the drawings or as shall be required by Engineer-in-charge, including dressing of bottom and sides of trenches,stacking the excavated soil clear from the excavation and subsequent filling around plinth/structures including watering,dressing and disposal of surplus soils as directed upto 15 metre complete in all respects.

Extra depth excavation :

Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections with all lifts and lead up to 30 m.

Loading by Mechanical means :

Rate for loading into wagon,Trucks or boats within 15 meters lead.

Carriage of Earth : ( Balance earth Qty)

1 st chain of 30 meters (0 - 30 m)

2 nd and 3 rd chain,per chain of 30 meters

For subsequent chain per chain of 30 meters up to 0.50 km

Cement concrete 1:2:4

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Brick Masonary Work :

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 meters above plinth level.

Steel Chowkats :

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.

SS Handles :

Providing & fixing 9" stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer in charge.

SS Tower Bolts :

Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer in charge.

12.5 mm.thick cement plaster 1:2 .

White washing :

White washing (Three coat)

Distempering :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Outside surface :Outside Plaster Qty.is taken

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering.)

C / Shuttering : ( Walls)

Centering and shuttering for faces of walls,partitions,retaining walls and the like (vertical or battering) including attached pilasters,buttertsses etc.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plain)

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

C / Shuttering : ( Slab )

Centering and shuttering for flat surfaces such as suspended floors,roofs,landings,chajjas,shelves etc.

C / Shuttering > 4.0 m.height :

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meters in height) for every additional height of 1 metres or part thereof.

Staircase Railing :

Providing and fixing stair case railing made out of M.S. Square bars 20x20m as vertical cost 0.70 metre high fixed with M.S. Base plate of 40mx40mmx6mm and flat iron 40mmx6mm as hand rail complete in all respects.

Steel :

Cold twisted deformed (Ribbed/Tor Steel Bars) Fe 500 grade as per IS 1786-2008 for RCC works,where not including in the complete rate of RCC including bending,binding and placing in position complete.

Food Grade Epoxy Paint Work :

Prepartion of Concrete surface :

Prepartion of plastered or concrete surface for painting ( including sand papering the surface),using ready mixed cement based wall putty by applying two or more coats to get required fnish.

Cement Primer :

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface.

Diff.Rates :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Jalandhar

Steel

Extra rate for OPC Cement

Carriage :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Fine sand : 65 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Steel Doors :

NS RUIDP SOR 2023 / Code no. 29.12

Steel beading :

NS RUIDP SOR 2023 / Code no. 29.13

CI Ventilator Cowl :

Chhattisgarh CSR June 2020 Item no.26.3

Providing and Applying Food grade Epoxy based water proof coat :

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Total : Part - A (CIVIL) CSR + Non CSR Amount : (Rs)

1. Capital Works CSR based Items

Brick masonary work (1:5) : ( up to 4.0 m.height)

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 metres above plinth level.

Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m )

Brick masonary work (1:5) : ( above 4.0 m.height) ( 4.0 - 6.0 m )

Cement concrete 1:2:4

Damp proof course 4 cm. thick of cement concrete 1:2:4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm.laid hot and sanded.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixture as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in superstructure.

Extra height Concrete :

Extra for RCC / PCC work done above 4 meters height ( where any single storey exceeds 4 meters in height ) for every additional height of 1 metres or part thereof.

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding,placing in position complete.

C / Shuttering : (Columns)

Centering and shuttering for columns ( Square or rectangular or poly gonal in plan)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height : ( Columns)

C / Shuttering > 4.0 m.height : ( Columns)

Extra rate for shuttering work done above 4 meters height ( where any single storey exceeds 4 meterzs in height0 for every additional height of 1 metres or part thereof.

C / Shuttering > 4.0 m.height :

C/shuttering : ( Lintels)

Centering and Shuttering for sides and soffits of beam,beams,launchings,girders,bressumers,lintels.

CP 12.5 mm.thk. : (1:4)

12.5 mm.thick cement plaster 1:4.

CP 12.5 mm.thk. : (1:2)

12.5 mm.thick cement plaster 1:2 .

White washing :

White washing (Three coat)

Preparation of plastered surface :

Prepartion of plastered surfaces for distempering including surface,applying filling with approved quality filler consisting of plaster o Paris and chalk mitti,including finishing the surface to the required finish complete.

Inside surface :Inside Plaster Qty.is taken.

Distempering :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade.

Outside surface :Outside Plaster Qty.is taken

Oil Bound Distemper :

Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade.

Inside surface : Inside Plaster Qty.is taken

Earth filling under floors :

Ironite flooring:

50 mm.thick ironite ( Metallic floor hardner to be mixed with Granolithic topping for heavy duty floors ) floor consisting of 40 mm.thick cement concrete 1:2:4 base and top layer 10 mm. thick laid with one part of ironite and grey cement mixed together in the ratio of 1:4 by weight to two parts of hard granite chippings 6 mm gauge by volume finished smooth with hard rubbing.

Steel windows and ventilators :

Supplying openable steel windows of stanard rolled steel Z-sections, joints mitred and electrically flash welded with iron fittings including necessary iron handles,Peg-stay catchers,bolts,iron plugs and pressed steel projected hinges and glazing clips,complete ( Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.

Fixing :

Fixing steel windows in walls with lugs,embedded in 15 cm x 12 cm x 7.5 cm. of cement concrete block of 1:2:4 mix,including,cost of cement concrete for lugs.

Glass panes :

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.

Doors Shutter :

Aluminium Fittings :

Cost of Aluminium fittings complete for doors,windows such as tower bolts,handles,Stoppers and screw etc.for these fittings.(Excluding sliding bolt)

Steel Chowkats :

Supplying Pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.

Rolling Shutter :

Parapet Wall :

115 mm. thick brick wall laid in cement sand mortar 1:4 without reinforcement in superstructure.

CC 1:2:4 : ( coping )

Cement concrete 1:2:4

Cement Concrete 1:2:4 gola :

Cement concrete 1:2:4 gola 10 cm.x 10 cm. concave quadrant along junction of roofs with parapet wall finished smooth,where specially specified.

Top Khurra :

Top khurra 0.6 m. x 0.6 m. for rain water pipe in 25 mm.thick cement concrete 1:2:4 over 50 mm.thick cement concrete 1:8:16.

Bottom Khurra :

Bottom Khurra on ground 1.2 m x 0.6 m consisting of bricks on edge laid in cement mortar 1:3 over 7.5 cm.cement concrete 1:8:16, including 12.5 mm. thick cement plaster 1:3

Drip Course :

Providing 75 mm.first class brick drip course at junction of roof and walls laid in cement sand mortar 1:4 including dressing of bricks.

Dry Brick edge paving :

Dry brick on edge paving sand grouted over 50 mm. thick earth and mud plaster.

CI Rain water pipes :

Providing and fixing cast iron 100 mm dia, rain water pipe with screw and wooden plugs fixed on wall-face, including filling joints with spun yarn and cement mortar 1:2 excluding head and shoe etc.

CI head :

Providing and fixing cast iron head for rain water pipe on wooden plugs fixed on wall-face including filling the joints with spun yarn and cement mortar 1:2.

CI shoes :

Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.

Embedding of CI Rain water pipes :

Embedding 100 mm.C.I.rain water pipe non-pressure I.S.I. Mark pipe in cement mortar during masonary work.

Excavation :

Earthwork in excavation of foundations of bridges,culverts,building including handling of materials with combined lead of 15 metres dressing of bed and sides stacking the excavated soil clear from the edge of excavation and subsequent filling around

Cement concrete 1:2:4

M-30 : Plinth level

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS :1791 and vibrated by needle vibrator but excluding steel reinforcement,centering and shuttering in foundation and plinth.

Brick masonary work in cm 1:5 : (plinth level)

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

Difference Rates :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks : ( / 1000 nos)

From Jalandhar

Steel

Extra rate for OPC

Carriage of Materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (7) : CSR Amount : (Rs)

Clear Water Transmission Main DI K-7

Ser no.

1. Capital Works CSR based Items

Excavation : ( Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-7 Pipes :

Pipe lines laid complete.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects.

Scour Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

D / F Pipe :

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged Pipes with screwed,flanged as per IS : 8329 - 2000,Class K -9 and laying the same in trenches to correct alingnment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage.

Pipe lines laid complete.

Valve chambers :

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

SV : 100 & 150 mm.dia. FH : Size : 80 mm.

Difference rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Jalandhar

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Fine sand : 65 Km.

Bailing out of water :

Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Air Valve :

Based on PHED Rajasthan 2023 Code no.6.6

Class PN 1.0

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (8) (i) CSR + Non CSR Amount : (Rs)

Dismantle of Road Work for Clear Water Transmission Main DI K-7

Ser no.

1. Capital Works CSR based Items

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (8) (iii) : CSR Amount : (Rs)

Estimation for Clear Water Transmission Main DI K-7 100 mm.i /d. and uPVC Pipeline

Ser no.

1. Capital Works CSR based Items

Excavation : ( Manually)

Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / Lane from wall to wall is less than 3 meter including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. Providing & fixing caution boards, watching, fencing, etc. and removal of surplus soil from the site upto 15 meter distance complete in all respects.

Excavation : (Mech.)

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

DI K-7 Pipe :

Pipe lines laid complete.

uPVC Pipe :

Providing and laying,jointing,fixing and testing ISI Marked uPVC Pipe lines as per ISI -4985 -2000, including specials such as tees,bends,sockets,elbow etc.cutting,testing ( including cost of specials ),in the ground complete in all respects.

DI Specials :

Supplying & laying D.I. specials / fittings as per IS :9523-2000 (ISI marked with prior approval of Engineer-in-Charge ) class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining,scaffolding,tools and plants,ropes,guys,etc.Complete in all respects.

Sluice Valve :

Providing & fixing C.I./D.I.Flanged end,stem of SS (AIS 1410) and Bronge (gunmetal) working parts Sluice Valves ISI marked 14846-2000 including jointing,testing & cost of Nut,Bolt & Insertion sheet all carriage complete.(with the approval of Enginner-in-charge.)

Jointing of DI pipes : ( for specials)

Jointing of D.I.Pipe and Specials with rubber tyton joints fitted complete excluding the cost of rubber gasket including testing etc.complete in all respect. (Note : This Item will be paid as per site requirement.)

CI Surface Boxes :

Providing ,fixing and jointing CI surface boxes for sluice valve,Air valve,Fire hydrant etc.including all carriages complete.

CI Surface Box : @ 33kg./box & For Fire Hydrant :131 kg/Box

C.I.Indicating Plates :

Providing & Fixing C.I. indicating plates of size 100 mm.x 100 mm.for SV/FH including synthetic enamel paint & letters in white enamel paint fixing in the ground with angle iron of size 25 x 25 x 5 mm.,230 mm.height from ground including concrete block complete in all respect as directed by Engineer-in-charge.

Valve chambers :

Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

SV : 100 & 150 mm.dia. FH : Size : 80 mm.

Diff.rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Jalandhar

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Fine sand : 65 Km.

Bailing out of water :

Bailing out water from the trenches for making new connections in existing pipe lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the Engineer-in-charge.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Sub-Total Part - A (9) : CSR Amount : (Rs)

WTP Boundary wall

Ser no.

1. Capital Works CSR based Items

Excavation :

Excavation in Soil ( any type) using hydraulic Excavator CK 90 with hydraulic excavator of 0.90 cum bucket capacity,including,cutting,trimming bottom and side slopes,in accordance with requirements of lines,grades and cross sections,including all lifts and combined lead up to 30 m.

Cement concrete 1:2:4

Reeinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Steel :

Cold twisted deformed (Ribbed/Tor Steel bar) Bars Fe 500 grade as per IS : 1786-2008, for R.C.C. works,where not including in the complete rate of R.C.C. including bending and binding,placing in position complete.

Shuttering :

Shuttering for faces of concrete foundations and foundation beam & plinth beam ( vertical or battering )

C / shuttering : ( Columns)

Centering and Shuttering for columns ( square or rectangular or poly gonal in plan)

C / shuttering : ( Beams)

Centering and Shuttering for columns ( square or rectangular or poly gonal in plan)

115 mm.thk.BBM :

115 mm. thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure.

CP 20 mm.thk. :

20 mm.thick cement plaster 1;4 in two coat work

White washing ( Three coat)

Dry distemper :

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

Sliding Shutters :

Providing and fixing G.I. Sheet 0.80mm thick sliding shutters with 40mmx40mmx6mm angle iron frame with diagonal braces 3.15mm gusset plates at the junctions, hooks at top and 25mm dia pulleys at bottom and 40mmx40mmx25mm dia pulleys at bottom and 40mx40mmx6mm angle iron top and bottom guides including locking arrangement with handles etc. complete.

Diff.in rates of materials :

Bajri :

From Mirthal

Coarse sand :

From Lohand Khad

Bricks :

From Jalandhar

Steel

Extra rate for OPC Cement

Carriage of materials :

Bajri :

From 165 Km.

Coarse sand :

From 165 Km.

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

Capital Works ' CSR based Items after adding 5.35% ( In Rs)

2. Capital Works ' NON CSR based Items

Barbed wire fencing :

1.2 Meter High G.I.Barbed Wire fencing

(Rate analysis based on CSR item no.24.43 )

Capital Works Non CSR based Items (In Rs)

Capital Works (Part - A) " Civil "

CSR based amount after adding 5.35% (In Rs)

Non - CSR based amount (In Rs)

Sub-Total Part - A (10) : CSR + Non CSR Amount : (Rs)

Intake Pumping Station

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Vertical Turbine (VT) Pump

Discharge 114 Cum/hr and head 55 mtr

DI flanged Pipe

RUIDP 2023,19.13

200mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

250mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

Dismantling joint

RUIDP 2023,19.56

250 mm dia

RUIDP SOR 2023,18.9

SS Manual Coarse Bar Screen ( 0.9 X 4 ) M

Amount Per One

Motorized Sluice Valve :

RUIDP 2023,19.29

Electrically Operated & SCADA Compatible class PN 1.6

250 mm dia

Motorized Butterfly Valve :

RUIDP 2023,19.34

Electrically Operated & SCADA Compatible class PN 1.6

200 mm dia

Rubber expansion bellows

200 mm dia PN 16

Puddle collar

RUIDP SOR 2023,19.63

250 mm dia

Zero velocity valve

TELANGANA SoR 2023-24

Non CSR ITEMS AMOUNT (RS)

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Double Flanged Tee : 250x250x200-2 nos. (71 kg/no.) ,Reducer (150x200) - 2nos ( 22kg/no),Blind flange 250mm - 1nos( 17 kg/no),D/F 90 Degree Bend 200 mm. -4 no.( 31 kg/no.),D/F 90 Degree Bend 250 mm. -4 no.( 50 kg/no.),

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

G.I.Pipe : 40 mm.i/d.

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (11) : CSR + Non CSR Amount : (Rs)

Raw Water Pumping Station

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Vertical Turbine (VT) Pump

Discharge 114 Cum/hr and head 18 mtr

DI flanged Pipe

RUIDP 2023,19.13

200mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

250mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

Dismantling joint

RUIDP 2023,19.56

200 mm dia

250 mm dia

RUIDP 2023,18.9

3 MT Capacity (Span 7 M and Lift 6 M)

Puddle collar

RUIDP 2023,19.63

200 mm dia

250 mm dia

Motorized Sluice Valve :

RUIDP 2023,19.29

Electrically Operated & SCADA Compatible class PN 1.6

250 mm dia

Motorized Butterfly Valve :

RUIDP 2023,19.34

Electrically Operated & SCADA Compatible class PN 1.6

200 mm dia

Floating Arm

Floating suction assly.(Floating arms) Dia- 200 mm, Metarial SS 304

Rubber expansion bellows

200 mm dia PN 16

Non CSR ITEMS AMOUNT (RS)

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Double Flanged Tee : 250x250x200-2 nos. (71 kg/no.) ,Reducer (150x200) - 2nos ( 22kg/no),Blind flange 250mm - 1nos( 17 kg/no),D/F 90 Degree Bend 200 mm. -6 no.( 31 kg/no.),D/F 90 Degree Bend 250 mm. -4 no.( 50 kg/no.),

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

G.I.Pipe : 40 mm.i/d.

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (12) : CSR + Non CSR Amount : (Rs)

Dewatering Pumps

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Non -Clog Submersible pump

RUIDP 2023,18.1

Discharge 42 Cum/hr and head 10 mtr

Dismantling joint

RUIDP 2023,19.56

150 mm dia

Lifting arrangement for pumps

RUIDP 2023,18.10

2 MT Capacity

Non CSR ITEMS AMOUNT (RS)

DI flanged Pipe

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

Lifting arrangement for pumps

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (13) : CSR + Non CSR Amount : (Rs)

Clear Water Pumping Station

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

Vertical Turbine (VT) Pump

Discharge 110 Cum/hr and head 60 mtr

DI flanged Pipe

RUIDP 2023,19.13

250mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

200mm dia DI K-9 grade flanged pipe conforming to I.S. 8329

Dismantling joint

RUIDP 2023,19.56

250 mm dia

RUIDP 2023,18.9

3 MT Capacity (Span 7 M and Lift 6 M)

Motorized Sluice Valve :

RUIDP 2023,19.29

Electrically Operated & SCADA Compatible class PN 16

250 mm dia

Motorized Butterfly Valve :

RUIDP 2023,19.34

Electrically Operated & SCADA Compatible class PN 1.6

200 mm dia

Rubber expansion bellows

200 mm dia PN 16

Puddle collar

RUIDP 2023,19.63

250 mm dia

TELANGANA SoR 2023-24

Non CSR ITEMS AMOUNT (RS)

D.I.Specials :

Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects.

Double Flanged Tee : 250x250x200-2 nos. (71 kg/no.) ,Reducer (150x200) - 2nos ( 22kg/no),Blind flange 250mm - 1nos( 17 kg/no),D/F 90 Degree Bend 200 mm. -4 no.( 31 kg/no.),D/F 90 Degree Bend 250 mm. -4 no.( 50 kg/no.),

Non Return Valve

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra

Sluice Valve :

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge)

G.I.Pipe : 40 mm.i/d.

Providing and laying,jointing,fixing,testing ISI Marked G.I.Pipe ( as per IS : 1239) B-Class premium make such as (approved make) including cost of specials such as tees,bends,sockets,elbow etc.cutting,threading and testing in trenches in the ground complete.

CSR ITEMS AMOUNT (RS)

AC Slip no.5 /02-03-2023 Add for GST Diff.betw.from 12% to 18% on CSR items amount : (Rs)

Sub-Total Part - B (14) : CSR + Non CSR Amount : (Rs)

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Mechanical Works:

RUIDP 2023,18.7

Up to 5 MLD

Sub-Total Part - B (15) : Non CSR Amount : (Rs)

ELECTRICAL WORKS

Electrical, Instrumentation & RTU Works for Intake Pump House, Water Suppy- Lohian Khass

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

1. Capital Works ' CSR based Items

XLPE INSULATED HT CABLES:

Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011working voltage 11KV(E) grade to be laid 1.50 meter below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc., of the required size:-

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES :

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:

Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with rovision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc.

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

3-STEPPED STEEL TUBULAR POLE:

Supply and erection of 3-Stepped steel tubular swaged and welded pole (410-SPMpa) of suitable length confirming to IS: 2713- (PART-II)-1980 (Steel tubes confirming to IS: 1161-1979, UTS 42 kgf/ Sq.mm) to fix up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to fill up to 15 cm below G/L with 1:2:4 cement concrete mixture including painting of pole with two coats of approved aluminium paint as required:-

CEMENT CONCRETE MUFFS:

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

(ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposesincluding bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Capital Works 'CSR based Electrical, Instrumentation & RTU Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

2. Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 72.4

RUIDP ISOR 2023, 72.4

RUIDP ISOR 2023, 72.2

100 KVA (Ref: 72.2.2)

RUIDP ISOR 2023, 44.6

30 KW (Ref: 44.6.2)

RUIDP ISOR 2023, 60.4

2.5 Sq. mm (Ref: 60.4.2)

3 core (Ref: 60.4.2.2)

RUIDP ISOR 2023, 63.5

25mm x 3mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.14)

RUIDP ISOR 2023, 66.4

Surface Mounting (Ref: 66.4.2)

Minimum lumen output 4200 lm (Ref: 66.4.2.3)

RUIDP ISOR 2023, 64.12

380 mm sweep(900/1400 RPM) (Ref: 64.12.2)

RUIDP ISOR 2023, 64.11

225 mm sweep (Ref: 64.11.1)

RUIDP ISOR 2023, 67.12

LED Street Light fixture with Minimum lumen output 7500 lm (Ref; 67.12.4)

RUIDP ISOR 2023, 67.12

LED Street Light fixture with Minimum lumen output 7500 lm (Ref; 67.12.4)

RUIDP ISOR 2023, 43.28

250 mm (Ref; 43.28.13)

RUIDP ISOR 2023, 47.12

RUIDP ISOR 2023, 73.41

RUIDP ISOR 2022, E111500

1.5 sq.mm (Ref; E111540)

1 pair (Ref; E111540A)

RUIDP ISOR 2022, E111400

1.5 sq.mm (Ref; E111440)

6 core (Ref; E111440E)

Capital Works 'Non CSR based Electrical, Instrumentation & RTU Items (In Rs)

Sub-Total Part - C (16) : CSR + Non CSR Amount : (Rs)

Electrical, Instrumentation & PLC Works for Raw Water Pump House, Water Suppy- Lohian Khass

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

1. Capital Works ' CSR based Items

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-

(xxvii)

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

(xxvii)

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES :

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:

Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with rovision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc.

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

Capital Works 'CSR based Electrical, Instrumentation & PLC Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

2. Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 60.4

2.5 Sq. mm (Ref: 60.4.2)

3 core (Ref: 60.4.2.2)

RUIDP ISOR 2023, 63.5

25mm x 3mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.14)

RUIDP ISOR 2023, 66.4

Surface Mounting (Ref: 66.4.2)

Minimum lumen output 4200 lm (Ref: 66.4.2.3)

RUIDP ISOR 2023, 64.12

380 mm sweep(900/1400 RPM) (Ref: 64.12.2)

RUIDP ISOR 2023, 64.11

225 mm sweep (Ref: 64.11.1)

RUIDP ISOR 2023, 67.12

LED Street Light fixture with Minimum lumen output 7500 lm (Ref; 67.12.4)

RUIDP ISOR 2023, 43.27

0 to 6 Mtr. (Ref; 43.27.1)

RUIDP ISOR 2023, 47.1

Control Indication Lamp for 24VDC, 220VAC No. 3 Push Button No. 3 Power Wiring+Control Wiring + Control TB/ Fuse 2A,TB etc Lot 1Panel Hardware, lugs, terminations, ferrules, name plate Etc. Lot 1UTILITY SOCKET 16A, 3 PIN No. 2 HMI Display 10 Inch, Colour No. 1 Isolators Dual Output, 24VDC Lot 1

RUIDP ISOR 2023, 73.41

RUIDP ISOR 2022, E111500

1.5 sq.mm (Ref; E111540)

1 pair (Ref; E111540A)

RUIDP ISOR 2022, E111400

1.5 sq.mm (Ref; E111440)

6 core (Ref; E111440E)

Capital Works 'Non CSR based Electrical, Instrumentation & PLC Items (In Rs)

Sub-Total Part - C (17) : CSR + Non CSR Amount : (Rs)

Electrical, Instrumentation & PLC Works for Clear Water Pump House, Water Suppy- Lohian Khass

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

1. Capital Works ' CSR based Items

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES :

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20 mm./25 mm. dia.(1.6 mm. thick) ISI Marked reccessed in wall etc., complete with powder coated/anodised concealed metal boxes (1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Step type electronic fan regulators 100watts ( socket size), bell push, 5Pin 6Amp. sockets (4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20 Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3 mm.thick etc. PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1.5" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/RCBO's/ RCCB's:

Supply and erection of sheet metal double door Phase segregated distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with rovision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/RCBO's as incomer and SP MCB's as outgoings) as per PWD General Specifications including connections with suitable size of thimbles and bonding to existing earth etc.

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10KA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

Capital Works 'CSR based Electrical, Instrumentation & PLC Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

2.Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 44.6

30 KW (Ref: 44.6.2)

RUIDP ISOR 2023, 60.4

2.5 Sq. mm (Ref: 60.4.2)

3 core (Ref: 60.4.2.2)

RUIDP ISOR 2023, 63.5

25mm x 3mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.14)

RUIDP ISOR 2023, 66.4

Surface Mounting (Ref: 66.4.2)

Minimum lumen output 4200 lm (Ref: 66.4.2.3)

RUIDP ISOR 2023, 64.12

380 mm sweep(900/1400 RPM) (Ref: 64.12.2)

RUIDP ISOR 2023, 64.11

225 mm sweep (Ref: 64.11.1)

RUIDP ISOR 2023, 67.12

LED Street Light fixture with Minimum lumen output 7500 lm (Ref; 67.12.4)

RUIDP ISOR 2023, 43.27

0 to 6 Mtr. (Ref; 43.27.1)

RUIDP ISOR 2023, 43.28

200 mm (Ref; 43.28.12)

RUIDP ISOR 2023, 47.1

Control Indication Lamp for 24VDC, 220VAC No. 3 Push Button No. 3 Power Wiring+Control Wiring + Control TB/ Fuse 2A,TB etc Lot 1 Panel Hardware, lugs, terminations, ferrules, name plate Etc. Lot 1 UTILITY SOCKET 16A, 3 PIN No. 2 HMI Display 10 Inch, Colour No. 1 Isolators Dual Output, 24VDC Lot 1

RUIDP ISOR 2023, 73.41

RUIDP ISOR 2022, E111500

1.5 sq.mm (Ref; E111540)

1 pair (Ref; E111540A)

RUIDP ISOR 2022, E111400

1.5 sq.mm (Ref; E111440)

6 core (Ref; E111440E)

Capital Works 'Non CSR based Electrical, Instrumentation & PLC Items (In Rs)

Sub-Total Part - C (18) : CSR + Non CSR Amount : (Rs)

Electrical Works for Sub-Station, Water Suppy- Lohian Khas

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

1. Capital Works ' CSR based Items

XLPE INSULATED HT CABLES:

Conductor screened with extruded semiconducting compound, XLPE insulated, insulation screened with extruded semiconducting combination in combination with copper tape (0.3KA for 1sec.) cores laid up, FR PVC inner sheathed, galvanized steel strip armoured and overall FR PVC sheathed cable confirming to IS:7098 (Part-2), 2011working voltage 11KV(E) grade to be laid 1.50 meter below ground level including excavation, sand cushioning, covering with sand & First class bricks and back filling the trench etc., of the required size:-

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1) 1988 to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & first class bricks and back filling the trench etc., of the required size as per PWD General Specifications:-

(xxxvii)

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

(xxxvii)

CABLE TRAY:

Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:

Capital Works 'CSR based Electrical, Instrumentation & PLC Items (In Rs)

Add 5.35% on CSR-Punjab-2022 items on account of change in GST rates for work contracts approved under Agenda item no.1 in the meeting of direction committee of Chief Engineers on dates 28-02-2023 and is issued vide memo No.2433-2452 /CSR dated 02-03-2023

2.Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 72.4

RUIDP ISOR 2023, 72.4

RUIDP ISOR 2023, 72.7.2

RUIDP ISOR 2023, 72.7.3

RUIDP ISOR 2023, 72.2

100 KVA (Ref: 72.2.2)

RUIDP ISOR 2023, 72.31

CPCB-IV complianced 25 kVA DG Set (Ref: 72.31.3)

RUIDP ISOR 2023, 72.29

20 to 40 KVA (Ref: 72.29.1)

RUIDP ISOR 2023, 63.5

25mm x 3mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.14)

50mm x 6mm G.I. ( Hot Dipped ) Strip (Ref: 63.5.17)

RUIDP ISOR 2023, 67.7

20.0 Mtr Hm (in 2 section) suitable for 12 No. Luminaries (Ref; 67.7.3)

RUIDP ISOR 2023, 67.11

High Power LED Flood Light Minimum lumen output 37500 lm (Ref; 67.11.11)

Capital Works 'Non CSR based Electrical Items (In Rs)

Sub-Total Part - C (19) : CSR + Non CSR Amount : (Rs)

SCADA for Intake, Raw & Clear water Pumping Station, WTP & Sub-Station- Lohian Khas

Supply, Installation, testing and commissioning of the following items complete in all respect and as per scope of work, specification and as required at site:

Capital Works ' Non-CSR based Items

RUIDP ISOR 2023, 47.14

Capital Works 'Non CSR based SCADA Items (In Rs)

Sub-Total Part - C (20) : Non CSR Amount : (Rs)

5 years’ Operation and Maintenance

1st Year.

2nd Year.

3rd Year.

4th Year.

5th Year.

Total (PART - D) 5 Years' O&M in Rs