Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹93.1 LAccepted-AOC 119 ACHARYA COMMERCIAL SHOPPING CENTRE DR C G ROAD NEAR BESANT CINEMA CHEMBUR MUMBAI 400 074 | MUMBAI | MUMBAI | MAHARASHTRA | 400074 | L-1 | Accepted-AOC Being L-1 | |
| 2 | Rejected-Technical B 17 NICHI NEHRU NAGAR KURLA E MUMBAI 400024 | MUMBAI | MUMBAI | MAHARASHTRA | 400024 | - | Rejected-Technical Not Meeting NIT Criteria |
Tender Value
₹95.6 L
EMD Value
₹1.9 L
Closing Date
7 Aug 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CE and Director, ESG
CED,BARC,Trombay, Mumbai
Development of North Gate Entrance appearances with Logo, Santri Post at North Gate BARC, Trombay, Mumbai.
2023_BARC_762361_1
BARC/CED/ET/34/2023-2024 Dated 17.07.2023
Open Tender
Civil Works
Item Rate
180 days
NG, BARC, Trombay, Mumbai
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹1.9 L
13 Sept 2023
18 Jul 2023
10 Aug 2023
19 Jul 2023
7 Aug 2023
19 Jul 2023
Amount
Lead charges for Lead exceeding 1 KM but not exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. 'Note: The rates in respect of this Item is applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil from corresponding STACK / TRUCK Measurement.
Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) / M10 with minimum cement content 220 Kg/CuM including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels
Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) / M15 with minimum cement content 320 Kg/CuM including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels
Providing and laying in position cement concrete of 1:1.5:3 at all levels (1 cement, 1.5 crushed sand, 3 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc.. complete as per specifications and drawings but excluding the cost of shuttering, centering and steel reinforcement.
Providing and laying in position cement concrete of 1:1:2 at all levels (1 cement, 1 crushed sand, 3 graded stone aggregate of nominal size 20 mm) / M15 with minimum cement content 320 Kg/CuM including consolidation, finishing, curing etc. complete all as per specifications but excluding the cost of Formwork shuttering, centering and steel reinforcement complete as per specifications and drawings at all levels
Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge
Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.
Providing and laying design mix cement concrete of M-30 grade in roads, taxi tracks and runways using crushed Sand, graded stone aggregate of 20 mm nominal size in appropriate proportions as per specified design criteria approved by Engineer-in-charge, mechanically vibrated using needle / Surface vibrators including steel form work with sturdy M-S channel sections including curing and providing and filling construction joints and dummy joints with approved joint filler primer or equivalent including rounding of the edges and filling the grooves 10 x 25 mm deep at top for construction joints and 10 mm x 50 mm deep at top for dummy joints with joint sealing compound (conforming to grade B of IS:1834) including making necessary arrangements for expansion joints and final stampad over the same etc all complete as directed by the Engineer-in-charge
Extra for PCC / RCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants .
Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.
Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor confirming to IS:1786.
Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including appling a coat of Zinc chromate primer of approved make all as per specifications, drawings and as directed by the Engineer in charge. Notes: 1. Structural steel confirming to IS 2062 shall be supplied. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.
Providing and fixing at all levels MS bolts including nuts and washers of approved size, quality and make as per requirements and as per specifications, drawings complete all as directed at site by the Engineer in charge
Providing, centering, shuttering Form work using PVC film faced plywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge.
For Sub Structure
For Super Structure
Providing and constructing Brickwork in cement mortar 1:6 using crushed sand with Flyash / Flyash Lime bricks with minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.
Providing and constructing Brickwork in cement mortar 1:4 using crushed sand with Flyash/ Flyash Lime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure up to and including Floor II Level including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings.
Supplying , cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site.
110 mm dia UPVC Pipes
Providing 20 mm thick plastering using Ready mix external plastering compound of approved make for external faces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning scaffolding up to 10 metres height complete.all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge
Providing Raised and cut pointing on stone with cement moratr 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge.
Providing and laying (IPS Flooring) cement concrete flooring 1:2:4, using crushed sand 50 mm thick finished smooth to the required level, finishing with a floating coat of neat cement including cement slurry, curing, cleaning the surface neatly at the time of handing over the area complete as per specifications and drawings as directed by the Engineer in charge
Providing and laying chequered / patterned tiles 300 X 300 mm X 30 mm thick of approved make including levelling, curing, finisihing and cleaning etc. complete to obtain required finish complete on 20 mm thick bed of cement mortar 1:4 (using crushed sand) as per specifications and drawings complete as directed by the Engineer-in-charge
Providing and Fixing Homogeneous 2.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade
Providing, supplying and laying pre polished granite slab flooring / dado / Wall cladding with not less than 17 mm thick/20 mm thick granite slabs over 20 mm thick base cement mortar 1:4 (using crushed sand) laid and placed with grey cement slurry including filling the joints with matching white cement based tile grout complete all as per specifications and drawings.
Using approved black shade
Using approved shades other than black
Extra for providing edge moulding to 17 mm to 20 mm thick marble stone / Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish et. Complete as per design approved by Engineer-in-charge.
Granite work
Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)
Anodised Aluminium sections (Minimum anodizing thickness of 15 micron)
Extra for colour anodizing
Providing and fixing 12 mm thick pre-laminated particle board flat pressed 3 layer or graded wood particle board conforming to IS 12823 Grade-I, Type - II in panelling fixed in aluminium doors, windows, shutters and partition frames with C.P Brass / Stainless steel screws etc. complete as per architectural drawings and directions of Engineer-in-charge Prelaminated particle board with decorative lamination on both sides
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
With clear float glass panes of 6.00 mm thickness
Providing and fixing double action hydraulic floor spring of approved brand and manufacturer (conforming to relevant Indian Standard) for doors including cost of cutting floors as required, embedding in floors and cover plates with M.S pivot and single piece of M.S sheet outer box with slide plate etc. complete as per directions of Engineer-in-charge with brass cover plate
Providing and fixing 4 Lever Mortice Lock of approved make suitable for aluminium sections
Providing and fixing approved quality and shape star locks cum handle of approved make for sliding shutters
Providing and fixing approved quality stain less steel body roller wheels of approved make for sliding shutters
Providing and fixing magnetic catcher triple strip vertical type 40 mm of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete .
Providing and fixing magnetic catcher double strip horizontal type 40 mm of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete .
Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work/ with baker rod if required by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 5 mm to 25 mm depth and 5 mm to 25 mm width
Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless steel screws to the side hung windows as per specifications and as directed by the Engineer-in-charge
Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification. (Npte : Aluminium frame work will be paid under reelevant item) 'Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site.
Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approvred surface design and edge profile placed in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centres and thereafter in direction vertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mm shall be inserted to form a grid size of 600 x 600 mm resting on the perifery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness. 'The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge. The main tees to be suspended from the ceiling/ soffit with the help of matal dash fastners of 6mmx50mm, soffit clits of 25mmx35xxx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m (Note : Only calcium silicate false ceiling area will be measured for the purpose of payment) Note : Tentative / suggested make for guidance of bidder(s) : M/s. AEROLITE False Ceiling- tiles- Cosmos / Spintone / Hexa / Quadra Models
Providing and fixing locks for aluminium sliding window shutters with overall size of 204mm x 23 mm or approved equivalent quality, make, type all as per specifications complete as directed by the Engineer-in-charge. Note : Tentative / suggested make for guidance of bidder(s) : M/s. GEETAVIN make as per cat. No. SS-004
Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item)
10 mm toughened clear/frosted glass
Providing and fixing cup board shelves using 25 mm thick pre-laminated flat prssed 3 layer (medium density) particle board or graded wood particle board in shelves including 18 mm x 20 mm teak wood beadings at all sides with necessary screws and fittings all as per drawings and specifications and as directed by Engineer-in-charge
Providing, painting,finishing walls with two coats of anti-algae, weather proof acrylic smooth emulusion paint of approved make with silicon additives on sand face plaster/ plain plaster & concrete surfaes of required shade over new work over a base coat of exterior cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.
Providing and painting old walls TWO coats on existing cement paint surface with fine textured exterior paint of approved make, required shade, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge. (Over rough cast plastered surface)
Providing and Painting with Epoxy PU paint using 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of 50 micron thickness over steel surfaces at all locations prepared and applied as per manufacturer' specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat). On STEEL surfaces. Note : Tentative / suggested make for guidance of bidder(s) : EPILUX-13 High Build primer
Dismantling plain cement concrete manually / by mechanical means carefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 100 m lead For thickness of tiles above 10 mm and up to 25 mm
Dismantling steel work in single sections including dismantling and stacking within 100 m lead In R.S Joists, Angles etc.
Dismantling Bituminous road including stacking of serviceable materails and disposal of unserviceable materials within 200 m lead
Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) single socketed pipes 110 mm diameter
Providing and fixing precoated Galvalume Roofing profile sheets of approved size, shape and pitch up to and including single length of 12.00 met. The sheet shall be fixed using self drilling / self tapping screws of size (5.5 X 55 mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as directed by the Engineer-in-charge
Galvalume sheet roofing 0.50 mm Thickness in Single sheet
Providing and fixing hand rail using 304 grade Stainless Steel pipes/Plates of approved size and make and quality by welding, mirror / matt polishing, fixing at site etc. for balcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge.
Providing, supplying and fixing customized decorative film / wall paper of desired design and pattern on wall face with necessary adhesive on Concrete surface / plaster surface / tile surface / Metal Surface etc. all complete as per the direction of EIC. (Note : The samples to be got approved by Architect/EIC before use).
Fabricating, Supplying and installation of 3D letters ("BHABHA ATOMIC RESEARCH CENTRE") of SS 304 grade 1.20 mm (18 gauge) thick of 300 Height (12") & 25/30 mm Deep Imported PVD Coated Gold Matt Finish/ approved colour by Architect. Note : The longer size of letter is measured for payment on inch per basis. Anyfull stop, dash etc. will be counted as half letter.
Fabricating, Supplying and installation of 3D letters ("भाभा परमाणु अनुसंधान केंद्र") of SS 304 grade 1.20 mm (18 gauge) thick of 300 Height (12") & 25/30 mm Deep Imported PVD Coated Gold Matt Finish/ approved colour by Architect. Note : The longer size of letter is measured for payment on inch per basis. Anyfull stop, dash etc. will be counted as half letter.
Fabricating, Supplying and installation of 3D Logo with top size in White Vinyl Decal for Emblem & BARC LOGO ("EMBLEM & BARC") of SS 304 grade 1.20 mm (18 gauge) thick of 36"-48"" Height & 50 mm Deep Imported PVD Coated Gold Matt Finish/ approved colour by Architect.
Engraving in Hard Stones /SS plate as directed by the Engineer-in-charge. Notes : The measurement for SS Plate will be paid under relavent item. The measurement will be done on Per cm height per Letter.
Providing Structural steel work in M.S Plain Plates and chequrred Plates for Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approved zinc chromate steel primer etc.including cost of structural steel Plates, welding all labour charges etc. complete as per drawings and specifications.
Using materials of approved manufacturers. supplied by the contractor confirming to IS:2062. All test reports to be provided along with the supply of the materials. 1. Structural steel confirming to IS 2062 shall be supplied. 2. Welding weights, connections, bolts and nuts shall not be measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes manufactured by M/s. Advani Oerlicon / ESAB India & D& H of specified suitable grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc.
Providing and fixing 30mm thick gang saw cut mirror polished Granite (premoulded and prepolished) machine cut Granite (Galaxy shade or as approved) for flooring/ skirting in lobby, passage, staircase (Tread and Riser), kitchen platforms, vanitiy counters, Wash basin Counters, Door Frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, and polishing the edges to give high gloss finish etc. complete at all levels.
PART-B Electrical Work SITC of VTPN DB with weatherproof outer enclosure as per TSS No.01
SITC of ETPN DB as per TSS No. 02
SITC of power points as per TSS No.03
SITC of lighting points as per TSS No.04
SITC of weather proof premium warm white landscape light as per TSS No.05
SITC of outdoor flood light as per TSS No. 06
SITC of wall mount fan as per TSS No.07
SITC of GI pipe as per TSS No.08
SITC of telephone point as per TSS No.09
Only installation of LT armoured cable upto 4CX25 Sq. mm as per TSS No. 10
SITC of cable end termination upto 4C X 25 Sq. mm as per TSS No. 11
SITC of 2ft, 20 W LED batten light as per TSS No. 12
stage.html
html • 0.04 MB
techsummary_801463.pdf
PDF • 0.31 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_801463.pdf
PDF • 0.38 MB
WOET34AnubhavEngineeringCompany.pdf
PDF • 8.85 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .