Supply,Installation,Testing and Commissioning of 11KV cable from NDMC sub-station at West Kidwai Nagar and Nehru park to Sarojini Nagar (PKG-I), New D

DSR E&M- Item description Qty Unit Rate Amount Remarks

Laying of XLPE insulated 11 kV grade H.T cable of size 400

Sqmm. 3C direct in ground including excavation, sand

cushioning, protective covering & refilling the trench as per

Handling/Laying of XLPE insulated 11 kV grade H.T cables of

sizes 400 Sqmm. 3C which are not necessarily laid in ground

but part of it going up to panel, transformer & part in the

building in open trench or otherwise

Drawing of XLPE insulated 11 kV grade H.T cables of sizes 400

3 8.3.2 Sqmm. 3C in existing RCC/HDPE Pipe, closed duct, subway or 409.34 Meter 134 54851.56

Supplying and fixing cable route marker with 10 cm X 10 cm X

5 mm thick G.I. plate with inscription there on, bolted/welded

to 35mmX35mmX6mm angle iron, 60cm long and fixing the

same in ground as required

Cost of Schedule items (in Rupees) 2137800.55

Road cut of any thickness (metalled/concrete) for one HT cable

inc Relaying after work

5.1 Service Road 400.42 Meter 335 134140.7

5.2 Road Berm 13.41 Meter 58 777.78

5.3 Brick footpath 1453.72 Meter 58 84315.76

5.4 CC footpath 4.45 Meter 58 258.1

5.5 Approach gate 115.9 Meter 58 6722.2

Supply of 11 kV HT XPLE Cable of size 400 Sq.mm 3C duly ISI

marked and as per technical specification

Supply and laying HDPE pipes ISI marked PN-6 class of size

7 MR 125 mm dia (OD) across Road /Service Road by trench less 81.59 Meter 5662.40 461995.216

Technology in various Roads/ Service Road/ Main Gate.

Supplying and making of H.S. type st. Th. Joint Boxes suitable

for H.T. XLPE 11 KV cable of size 400 sq.mm/3C

Supplying and making of H.S. type indoor end termination kits

suitable for H.T. XLPE 11 KV cable of size 400 sq.mm/3C

Supply & installation of prefabricated hot dip galvanized steel

ladder type cable trays, (galvanization not less than 50

microns) including bends, tees & reducers fabricated out of hot

rolled sheet steel with rigid welded construction with a rung as

per standard and specifications, of approved make and cable

MR tray fittings, including all labour and materials, as per

approved drawings,specifications of this tender and directions

of Engineer-in-charge

450 mm wide (Runners 25 x 75 x 25 x 2.5 mm and Rungs 20

x 30 x 20 x 2.5 mm 250 mm center to center.)

Total cost of Non-schedule item 10938551.84

Total Estimated cost (in Rs.) 13076352

Digitally signed by SAKET