8566 WELCOME MAINTENANCE INCLUDING B R AND E M REPAIRS TO OFFICERS MD ACCN UNDER AGE B R II OF GE SOUTH PUNE

Amount

M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:4 as in backing coat with and including triangular filletting in CM 1:4 on top edges including dismantling wall tiling including taking down cement plaster and removing of debries outside MD land complete all as specified and as directed

M&L for coloured glazed ceramic designed tiles in vertical surface 300x 200x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in CM 1:4 as in backing coat with and including triangular filletting in CM 1:4 on top edges including dismantling wall tiling including taking down cement plaster and removing of debries outside MD land complete all as specified and as directed

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl dismantling floor, hearth and removing of debries outside MD land complete all as specified and as directed

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, including dismantling floor, hearth and removing of debries outside MD land complete all as specified and as directed

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:4 with and including triangular filletting in CM 1:4 on top edges including dismantling wall tiling including taking down cement plaster and removing of debries outside MD land complete all as specified and as directed

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismantling floor hearth and removing of debries outside MD land complete all as specified and as directed

M & L ( light shade) Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:4 with and including triangular filletting in CM 1:4 on top edges including dismantling wall tiling including taking down cement plaster and removing of debries outside MD land complete all as specified and as directed

M&L for granite ( of any type ) work ( table rubbed and polished ) 18 to 20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite with laid over and including screed bed or bedding layer 15 mm thick, in CM 1:6 on stone /brick masonry / concrete surfaces including dismantling of stone slabs and removing of debries outside MD land complete all as specified and as directed

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L for machine cut cuddapa stone slabs one side polished, 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar (1:6) including dismantling of stone slabs and removing of debries outside MD land complete all as specified and as directed

M&L for cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment / surface and carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50, complete all as specified and directed. Make: PIDILITE or equivalent make as approved by GE.

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable pipes and connections, complete all as specified and directed.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable pipes and connections, complete all as specified and directed.

M & L for 25mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable pipes and connections, complete all as specified and directed.

M&L for refixing of old serviceable GI ppipe of 15mm bore and connections in new or old position (wall/floor/ceiling etc) with and including all fittings and fixtures including taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified & directed.

M&L for refixing of old serviceable GI ppipe of 20mm bore and connections in new or old position (wall/floor/ceiling etc) with and including all fittings and fixtures including taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified & directed.

S & F in repairs gun metal gate valves (Class I), with iron wheel head, screwed both ends for iron pipe, ISI marked, complete all as specified and directed for the following bore dia of pipe:- (a) 15mm bore.

(b) 20mm bore.

(c) 25mm bore.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S & F in repair vitreous china wash basin flat back size 550 mm x 400 mm fixed on and including CI bracket including fixing tap, waste chain and plug and porcelain stopper and S & F 32mm dia brass CP waste coupling and waste pipe with and including 15mm bore CP fancy type pillar tap, complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices including PVC low level flushing cistern 10 Ltr capacity with all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and directed.

S & F in repairs 15 mm bore brass chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed

S & F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S & F in repairs 15 mm stop valves / angular stop cock, concealed long shank, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete all as specified and directed.

S & F in repairs CP health faucet (ABS Body) with 1 mtr long flexible cod complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S & F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws, complete all as specified and directed .

S & F towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs, complete all as specified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as speicified and directed.

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size and 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including tank nipple of existing size and 20 mm ball valve high pressure PTMT with rod & high density plastic ball including dismantling water tanks and removing to store complete all as specified and directed by Engineer-in-Charge

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore complete all as specified and directed

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 25 mm bore complete all as specified and directed

M & L for cleaning of PVC water tank of capacity upto 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. by using bleaching powder complete all as specified and directed

M & L for Cleaning of PVC water tank of capacity upto 1000 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. by using bleaching powder complete all as specified and directed

S&F in repairs flexibe waste pipe of 32 mm or 40 mm dia for wash hand basins, sink etc complete all as specified and directed

S & F in repairs stainless steel gratings 100 mm dia with hole for waste pipe complete all as specified and directed

S&F PVC (SWR), 75mm dia outlet multi floor trap with grating including jointing with solvent cement, complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed. Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC or AC set in CM or solvent, complete all as specified and directed. Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 110mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

S&F 75mm bore PVC (SWR) bends / Tee with acess door, complete all as speicified and directed.

S&F in repapir plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S&F in repairs HDPE PVC lid (cover) suitable for 500 ltr to 1000 Ltrs capacity PVC water tanks, complete all as speicified and directed.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old unserviceable mirror, complete all as speicified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as speicified and directed.

Taking down shutters of any description n.exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as speicified and directed.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as speicified and directed.

Taking down shutters of any description exc 1.0 sqm and n exc 2 sqm complete all as specified & as directed

S&F in repairs pressed steel frames of size 105mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame including taking down of old chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S&F in repairs pressed steel frames of size 120mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame including taking down of old chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters of any number member of panels with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with lipping complete all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening incl taking down of chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and directed.

S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.

S & F in repairs aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 100 mm size stainless steel fancy type handles complete all as specified and directed.

S &F in repairs 20 mm bore aluminium powder coated curtain rod, medium weight complete all as specified and as directed.

S&F in repairs aluminium powder coated fancy type bracket suitable for 20 mm bore curtain rod complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.

S&F in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.

S&F in repairs, stainless steel plate rack of size 36inch x 39 inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed.

S & F 18 mm thick PVC sheet shutter one side prelim of any shade as in cupboard or kitchen cabinet etc complete all as specified and directed.

S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S & F Magnetic door catches for cupboard / cabinet etc complete all as specified and as directed.

S&F 100mm dia brass handles, cast type, polished bright cupboard handles fixed with nuts screws and washer complete all as specified and directed.

M&L for running welding in repairs not exc 6mm thick plates and angles complete all as specified and as directed.

S&F three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F ventilators / louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make and rubber beading etc all as directed (a) SP : 20048 (b) Glazing clips : 19352

S&F in repair floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm complete all as specified and directed.

M&L for preparing new surfaces of wood of any description no otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling of wrought or MS work of any description etc complete all as specified and directed.

M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like incl dismantling old existing grill/ grating wk or wrought iron work of any desc and any position, gates etc complete all as specified and directed.

S&F framed work for doors or gate of angle, plain sheet or other sections etc. complete drilled for fixing of steel sheeting, incl necessary welding etc of grade Fe-410-w(Gde-E-250 quality B) complete incl dismantling structural steel incl doors or wrought iron work of any desc and any position, gates etc complete all as specified and directed.

S&F for rolled mild steel conforming to grade E-250 (Fe-410W, quality A) as in main and cross beams, hip and jack rafters, purlins, where connected to common rafters and running rails and guides for sliding doors, fixed with angle clips or other connecting plates complete all as specified and directed.

M&L for preparing new surfaces of steel over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamal (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I suspension wires spaced at 1200 mm on main runners including making niches for fans/light complete all as specified and directed.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer on ceiling including dismantling of existing false ceiling with grid complete all as specified and directed.

M&L for decorative POP cornices / moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

Hacking out old broken glass of any thickness/Size or quality from wooden/metal frame fixed With putty / beading & S&F 3mm thick sheet glass, plain or frosted ordinary quality not exc 0.5 sqm in each pane complete all as specified and as directed.

M&L for preparation of old decorative surfaces of wall including cornices (plastered or unplastered) by brooming down and scrapping wherever necessary and applying one coat of white wash on walls, complete all as specified and directed.

Preparation of old decorated surfaces by brooming down and scrapping wherever necessary and applying one coat of white wash on ceiling complete all as specified and directed.

Preparation of old decorated surfaces of wall by brooming down and scrapping wherever necessary and applying one coat of distemper oil emulsion complete all as specified and directed.

Complete removal of existing treatment amd making even and smooth the surfaces by sand papering etc and M&L for applying 3mm thick wall care putty with including applying two coats of distemper oil emulsion on walls complete all as specified and directed.

Preparation of old decorated surfaces of walls and applying one coat of cement base paint white or tinted complete all as specified and directed.

Preparation of old painted wooden surfaces of any descrition exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated surfaces by brooming down and scrapping wherever necessary and applying one coat of weather proof exterior acrylic emulsion paint (1st Quality) on walls, cornices, borders, facia of chajjas & projected columns complete all as specified and directed. Note :- Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern roofing tiles complete all as specified and directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified and directed.

M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed.

Fixing only IInd class HW clean sawn battens at 30cm centres exc 5 and n exc 15 sqcm ( Except batten) complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling including dismantling of old existing timber scantling in any position (unframed wok) exc. 40 sqcm in section complete all as specified and directed.

S&F in repairs IInd class hard wood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section and M&L for plain fillets of IInd class hard wood exc 13 but n exc 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.

Preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) and applying two coats creosote complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

S&F 0.63 mm thick grade 'O', GI corrugated mild steel sheeting with grade 'B' corrugation, zink coating @ 120 GSM inclusive of both side, laid with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook in roof complete all as specified and directed.

S&F 0.80mm thick PGI mild steel sheets with zinc coating @ 120 gm/sqm inclusive of both side as in ridge, hips, valley, gutters and straight flashings complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl, fixed with self tapping screws complete all as specified and directed.

M&L for filleting in any position and to any shape in CM 1:3 sectional area exc 25 sqcm but n exc 50 sqcm complete all as specified and directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) of 75mm thick, laid in alternate bays including finishing the surfaces even and smooth using extra cement including demoiltion of existing PCC of any type and any position complete all as specified and as directed.

S&F in repair high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 fixed complete to wall or in floors with necessary socket, elbow & bend etc complete fixed to wall or in floors etc complete all as specified and directed.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:3:6) type C-1 using 20 mm graded aggregate and setting in CM 1:6 including dismantling of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L for 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra lime or cement) incluidng taking down cement old plaster complete all as specifed and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 to be finished even and smooth (without using extra lime or cement) complete all as specifed and as directed.

M&L for prepration of newly plastered wall surface and applying two coats of oil bound distemper over and incluidng 3 mm thick wall care putty complete all as specified and as directed.

M&L for prepration of newly plastered wall surface and applying two coats of cement based paint over a coat of chalk whiting complete all as specified and as directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder, regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking down old unserviceable / worn out MCB DB / Main switch, of any type and size complete all as specified and as directed.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC casing caping including all accessories etc., heavy duty ISI marked, mild steel concealed sunken boxes,1.6 mm thick and 60 mm depth with earth dolly duly painted with two coat of black bituminous paint over a coat of red oxide primer with laminated bakelite sheet of min. thickness of 3mm suitable for switches/ sockets, etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box complete all as specified and directed for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any claims. (a) One light/fan/ point controlled by one switch.

(b) One 5 Amps Socket outlet point controlled by one switch on independent board.

(c) One 5 amps socket outlet point on same board with other switches

(d) One bell/buzer point controlled by one bell push

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 2.5 Sq.mm(Nominal area),single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC casing caping including all accessories etc., heavy duty ISI marked, with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coats of anti corrosive paint over of red oxide primer, internally, covered with laminated bakelite sheet of minimum thickness of 3mm sheet suitable for switches, including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and all as specified for 15 amps socket outlet point on independent board complete all as specified and directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 1.5 Sq.mm(Nominal area),single core,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in the existing conduit ,with mild steel concealed sunken boxes with earth dolly with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,sockets,etc including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box complete all as specified and directed for the following:- Note:- Making good of disturbed surfaces will be done by contractor without any extra claims. (a) One light/fan point controlled by one switch.

(b) One 5 Amps Socket outlet point controlled by one switch on independent board.

(c) One 5 amps socket outlet point on same board with other switches

(d) One bell/buzer point controlled by one bell push.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 2.5 Sq.mm (Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked the existing conduit with mild steel concealed sunken boxes 1.6 mm thick & 60 mm depth with earth dolly duly painted with two coat of black bituminious paint over a coat red oxid primer with laminated bakelite sheet of min. thickness of 3mm sheet suitable for switches,including PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core green PVC insulated FRLS cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box and complete all as specified and directed for 15 Amps socket outlet on independent board. Note for item nos.136 to 139:- Making good of disturbed surfaces will be done by contractor without any extra claims.

M & L for submain wiring complete with two single core 4 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 2.5 Sqmm including taking down of old unserviceable sub main wiring complete all as specified and directed. Note :- 2 runs of 4 Sqmm conductor and one run of 2.5 Sqmm earth wire shall be measured as one unit length.

M & L for submain wiring complete with two single core 6 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 4 Sqmm including taking down of old unserviceable sub main wiring complete all as specified and directed. Note :- 2 runs of 6 Sqmm conductor and one run of 4 Sqmm earth wire shall be measured as one unit length.

M & L for submain wiring complete with two single core 10 Sqmm PVC insulated, unsheathed multi stranded copper conductor FRLS cable, 1100 volts, FR grade in existing conduit, including continuous PVC insulated copper earth wire 6 Sqmm including taking down of old unserviceable sub main wiring complete all as specified and directed. Note :- 2 runs of 10 Sqmm conductor and one run of 6 Sqmm earth wire shall be measured as one unit length.

M&L for point wiring with 1.5 sqmm PVC insulated copper conductor FRLS cable 1100 Volts grade complete with & including PVC casing and caping and accessories with PVC ISI marked switch board, mounted on surface of walls including continuous PVC insulated copper earth wire 1.5 Sqmm connected to common earth dolly, complete all as specified and directed for the following :- (a) One light/fan/ point controlled by one switch.

(b) One 5 Amps Socket outlet point controlled by one switch on independent board.

(c) One 5 amps socket outlet point on same board with other switches

(d) One bell/buzer point controlled by one bell push

M & L for point wiring with 2.5 Sqmm copper conductor FRLS cable for 15 amps socket outlet point on independent board and continuous PVC insulated copper earth wire 1.5 Sqmm in PVC casing and capping and including PVC mounted switch board complete all as specified and directed

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm(Nominal area),single core, VC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls/floors/ceiling including all conduit accessories/fittings/junction boxes/inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, including PVC insulated stranded copper conductor 1.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box complete all as specified and directed for the following:- (a) One light/fan/ point controlled by one switch. Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

(b) One 5 Amps Socket outlet point controlled by one switch on independent board.

(c) One 5 amps socket outlet point on same board with other switches

M&L for point wiring of any length using approved colour coding as per IS,with stranded copper conductor 2.5 Sq.mm(Nominal area),single core,,PVC insulated and unsheathed stranded FRLS cable 1100 volts grade,ISI - 694 marked in and including heavy duty,PVC rigid conduits 20 mm or higher dia as reqd at site, totally concealed in walls / floors / ceiling including all conduit accessories / fittings / junction boxes / inspection covers etc; of heavy grade, ISI marked and sunk terminal boxes of factory made pressed steel housing, totally concealed in walls suitable for modular switch socket accessories with earth dolly with suitable modular plate etc, painted with two coats of anti corrosive paint over of red oxide primer,internally,covered PVC insulated stranded copper conductor 2.5 Sq.mm (nominal area) single core cable as earth and connecting to earth dolly complete and including cutting and chases in the wall for box complete all as specified and directed for 15 amps socket outlet point on independent board Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

S&F modular type switch 6A single pole, one way, 240 volts, Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.

S&F multipurpose socket outlet 16A -2/3 pin,2 module for 230 volts flush type.cat.No 6730 42 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.

S&F modular type switch 16A single pole,one way,1 module, 240 volts,Cat.No 6730 00 Make-Legrand "Myrius series" or of equivalent specified here-in-after complete all as specified and as directed.

S&F modular universal socket 2 module outlet 6 amps 5 pin 230 volts flush type complete all as specified and as directed. (Make-Legrand : "Myrius series" or of equivalent specified here-in-after.)

S&F in replacement of modular ceiling fan step regulator 100W, 2module, electronic step type, suitable for fan 48"/56" sweep complete all as specified and as directed. (Make-Legrand,"Myrius series" or of equivalent specified here-in-after)

S & F 240 V, 20 Amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and as directed.

S&F piano type switch 5 amps single pole, 240 volts complete all as specified and as directed.

S&F bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.

S&F bell electrical ding dong including hard \ wood board bell push, flush type, 5 amp, 240 volts complete all as specified and as directed.

S&F ceiling rose surface type three terminals, 240 volts complete all as specified and as directed.

S&F socket outlet 5 amps 5 pin 230 volts flush type on same board complete all as specified and as directed.

S&F socket outlet multipurpose 2 in 1, 5/15 amps, 230 volts flush type complete all as specified and as directed.

S&F piano type switch 15 amps single pole, 240 volts complete all as specified and as directed.

S&F lamp holder (Angle/bracket) insulated body, with back plate for batten fittings with 5 watt LED bulb etc. complete all as specified and as directed.

S&F in replacement of ceiling fan regulator two module, electronic step type, delux, suitable for fan 48"/56" sweep complete all as specified and as directed.

S&F bell push, flush type, 5 amp, 240 volts, Modular type complete all as specified and as directed.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm with and including PVC casing caping and making good of disturbed surfaces with existing including taking down of old unserviceable sub main wiring including taking down of old unserviceable sub main wiring including taking down of old unserviceable sub main wiring complete all as specified and directed.. (Note :- 3 runs of 4 Sqmm conductor and earth wire and 1 run of PVC casing caping shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 6 sqmm with and including PVC casing caping and making good of disturbed surfaces with existing including taking down of old unserviceable sub main wiring complete all as specified and directed.. (Note :- 3 runs of 6 Sqmm conductor and earth wire and 1 run of PVC casing caping shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 6 sqmm, 1100volts grade, PVC insulated, stranded copper conductor FRLS cable with two continuous copper earth conductor of 4 sqmm with and including PVC casing caping & making good of disturbed surfaces with existing including taking down of old unserviceable sub main wiring complete all as specified and directed. (Note :- 4 runs of 6 Sqmm copper conductor cable, 2 runs of 4 Sqmm earth wire and 1 run of PVC casing caing shall be measured as one unit length.)

M & L for Sub main wiring complete with two single core 6 sqmm,1100 volts grade, FRLS, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm with and including concealed PVC conduit & making good of disturbed surfaces with existing including taking down of old unserviceable sub main wiring complete all as specified and directed. (Note :- 2 runs of 6 Sqmm copper conductor cable, 1 runs of 4 Sqmm earth wire and 1 run of PVC conduit shall be measured as one unit length.)

M & L for Sub main wiring complete with four single core 6 sqmm and two core of 4.0 sq.mm earth wire,1100volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor in and including PVC conduit for concealed and making good of disturbed surfaces with existing including taking down of old unserviceable sub main wiring complete all as specified and directed. (Note :- 4 runs of 6 Sqmm copper conductor cable, 2 runs of 4 Sqmm earth wire and 1 run of PVC conduit shall be measured as one unit length.)

M&L for cutting chases, pinning in making good to facing where required and poinitng in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good of disturbed surfaces, cutting not exc 10 cm girth complete all as specified and directed. (Note : Making good of disturbed surfaces will be done by the contractor without any claims.)

S&F MCB DB TPN 4 way double door with 200 amps rated busbar 415 V, recess mounted/wall mounted complete all as directed and specified by Engineer in charge.

S&F MCB DB SPN 8 way, double door, with 200 Amp rated busbar 240 V, recess mounted complete all as specified and directed by Engineer in charge.

S&F vertical 4 way TPN double door,recess mounted / wall mounted DB incl one number,MCCB as incomer 3 pole and neutral of 100A rated capacity & 16KA breaking capacity,pre-fitted at factory complete all as specified and directed.

S&F MCB DB SPN 4 way double door with 200 amp rated busbar, 240V recess mounted with common earth dolly complete all as directed and specified.

S&F MCB SP 6-32amps,10KA, 'C' series complete all as specified and as directed.

S&F MCB SPN 40-63 amps,10KA, 240V, 'C' series complete all as specified and as directed.

S&F MCB TPN 63 amps, 10KA, 415 V, 'C' series complete all as specified and as directed.

M&L for earthing complete with GI earth plate electrode 60cm x60cm x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr in deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level including connecting GI earth wire 4mm dia by GI nut, bolt, washers all as shown in electrical plate No. 3 of SSR Part I of 2009 including funnel for watering, PCC 1:3:6 type C-2 using 40mm graded stone aggregates as in pit / chamber, RCC 1:2:4 type B0 using 12.5mm graded stone aggregates and 6mm dia mild steel bars at 100mm c/c as in chamber cover, charcoal, salt etc complete including excavation and earth work in any strata, test point and testing on completion including filling up the earth pit with black cotton soil for best result and removal of excavated material from site complete all as specified and directed by Engineer-in-charge. Note : GI earthwire and GI protection pipe upto 7.5 mtr length for each earthing shall be deemed to be included in quoted rates.

S&F 4mm dia GI wire as in earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe complete all as specified and directed

Supplying and fixing LED tube light fitting complete with all fitting and fixing accessories, 1X20 Watt pre-wired with high efficiency electronic driver, glare free, smooth light distribution, complete all as specified and directed

S&F in replacement integral LED Security Light Luminaire 30 W comprising of epoxy powder coated aluminium housing, enclosed with glass cover in frame suitable for 50/40 mm GI Pipe (including GI pipe) complete with accessories including taking down of old unserviceable light fittings complete all as specified and directed

Preventive maintenance of storage type electric water heater (Geyser) of capacity 25/50 ltrs by replacing defective spare parts like elements, thermostates or inner tank etc, stalled at different locations, of any make by comprising of the following services, complete all as specified and directed:- (a) Inspection of geyser after opening bottom cover plate. (b) Examine water tightness of storage tank. (c) Carry out inspection and ensure that all stop cocks, pressure reducing valves, etc. are working properly. (d) Replace washers and glands of defective taps & other spare parts (If required) to ensure smooth functioning of geyser. (e) Inspect vent pipes and remove blockage / obstruction if any. (f) Check and correct earth continuity of electrical items. (g) Check and correct temperature setting of thermostats and ensure its smooth functioning. (h) Checking and adjustments of pressure reducing valves. (i) Checking of dead weight type high pressure release valve (PRV) by removing dead weight protection cleaning the seat and ensuring that the waste hole is not blocked / chocked. (j) Testing of Geysers after repairs / maintenance / replacement of spare parts and to ensure its smooth functioning. Note : Spares parts shall be measured and paid separately

Supply only thermostat ISI marked suitable for the following capacity Geysers 25 ltrs. to 50 ltrs capacity complete all as specified and as directed.

Supply only safety valve/dead weight valve ISI marked suitable for 25 and 50 ltrs. capacity Geysers complete all as specified and as directed.

Supply only heating element for 1KW /1.5 KW rating as required at site(any type) including rubber washers (ISI marked) complete all as specified and as directed.

Supply only inner tank suitable for 25 litre capacity storage type geyser, made out of copper sheet complete all as specified and as directed

Supply only inner tank suitable for 50 litre capacity storage type geyser, made out of copper sheet complete all as specified and as directed

Supply & fix apparatus plate suitable for Geyser of 25 to 50 ltrs. Capacity complete all as specified and as directed.

Supply & fix PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 45/60cm long for cold water as per requirement complete all as specified and as directed.

Supply & fix PVC connections pipe with brass hexagonal adapters both side suitable for 15mm dia pipe 45/60cm long for hot water as per requirement complete all as specified and as directed.

S&F in replacement 15A plug top and connection complete all as specified and as directed.

S&F in replacement non-return valve of 15mm / 20mm dia of brass ISI marked, complete all as specified and as directed.

S&F in replacement Geysers inner water tank of 25 to 50 ltrs. capacity fixed with gas welding / brazing for water tightness and testing complete all as specified and as directed.

S&F indicators of Geysers 25 to 50 ltrs. Capacity (Red/Green/Yellow) complete all as specified and as directed.

S&F gasket rubber ring suitable for heater plate of any size Geysers complete all as specified and as directed.

Supply & fix inspection cover for outer container of Geysers 25 to 50 ltrs complete all as specified and as directed.

Supply & fix outer container, suitable for 25 ltrs. Capacity, made out of 14 gauge CRCA sheet duly painted complete all as specified and as directed.

Supply & fix outer container, suitable for 50 ltrs. Capacity, made out of 14 gauge CRCA sheet duly painted complete all as specified and as directed.

Taking down defective geysers for repair / painting / shifting (repairs will be measured and paid separately under respective Item of Sch) complete all as specified and as directed.

S&F in repairs cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade from socket / switch to geyser, complete all as specified and as directed.

S&F in repairs cable PVC insulated 3 core 4 Sqmm with stranded copper conductor 1100V grade from socket / switch to geyser, complete all as specified and as directed.

M&L for PVC rectangular block for mounting of switches, sockets, fan regulator etc with cover laminated sheet cover of size 100x100mm and 50mm deep complete all as specified and as directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

M&L for PVC rectangular block for mounting of switches, sockets, fan regulator etc with cover laminated sheet cover of size 175x100mm and 50mm deep complete all as specified and as directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

M&L for PVC rectangular block for mounting of switches, sockets, fan regulator etc with cover laminated sheet cover of size 200x150mm and 50mm deep complete all as specified and as directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

M&L for PVC rectangular block for mounting of switches, sockets, fan regulator etc with cover laminated sheet cover of size 250x200mm and 50mm deep complete all as specified and as directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

M&L for PVC rectangular block for mounting of switches, sockets, fan regulator etc with cover laminated sheet cover of size 350x300mm and 50mm deep complete all as specified and as directed. Note:- Making good of disturbed surfaces will be done by contractor without any extra claims.

S&F in repairs Fan condenser 2.5 Mfd, 230v AC,50 Hz complete all as specified and as directed.

Gauri Associates

Sunny Enterprises

MONA ASSOCIATES