CA NO GE/AFJ-25/2024-25 REPAIR/PAINTING/POLISHING OF STEEL FURNITURE AT AF STN JAMMU UNDER GE AF JAMMU

Amount

Taking down worned out/unsv components of the following Steel furniture items, S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge

ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031) /Almirah Small/ Medium steel (FD-350 /1032/243)/ Locker Bedside Steel ( FD-257/1029) :-

Shutter (Single Leaf) for almirah large steel made of 1.6 mm thick MS sheet and shall be applied a coat of red oxide primer on both side after preparation surfaces.

All as per Item (2.01) here-in-before but for almirah Small/medium steel

All as per Item (2.01) here-in-before but for Locker Bedside Steel.

Shelves made of 1.25 mm thick MS sheet and shall be applied a coat of red oxide primer on both side after preparation surfaces for almirah Large steel

All as per Item (2.04) here-in-before but for almirah Small/medium steel.

All as per Item (2.04) here-in-before but for Locker bedside steel.

Six levers brass lock for almirah large steel/almirah small/medium steel Make : Godrej/Harrison/Link with duplicate keys

Three way locking device for almirah large steel of 10 mm dia MS rod as per trade pattern including a coat of red oxide primer.

All as per Item (2.08) here-in-before but for almirah small/medium steel.

Chromium plated steel handle 125mm for almirah large Steel/Almirah small/ almirah Medium.

Chromium plated MS Key plate fixed with screw and nuts for almirah large steel/Almirah small/Medium.

Chromium plated 100mm Steel Handle 'D' type for locker bedside steel.

Leg for almirah large steel/almirah small/medium steel made of 1.6 mm thick MS sheet with Gas welding including a coat of red oxide primer.

All as per Item (2.08) here-in-before but 1.0 mm thick MS sheet for locker bedside steel.

75mm Chromium plated haps & stapple fixed with rivets of locker steel .

Hanging rod for locker bed side steeel of 1.6mm thick chromium plated MS Rod.

CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M) )

Seat frame of chair CB Steel with arms of 1st class hard wood duly polished with high class black polish including weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality fixed as shown in drawing.

All as per item No (3.01) here-in-before but back frame.

All as per item No (3.01) here-in-before but seat frame for chair CB steel without Arms.

All as per item No (3.01) here-in-before but back frame.

Arms rest for chair CB steel with arms of 1st class hard wood duly polished with high class black polish.

PVC cap at top of the frame of the chair (02 Nos to each chair)

PVC Shoe at bottom of the frame of the Chairs (04 Nos to each chair)

TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006)

Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

Drawer made of 22 gauge MS sheet with a coat of red oxide primer.

Six levers Lock of Godrej/Harrison with duplicate keys.

Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.

PVC Shoe at bottom of the leg of the table.

TABLE OFFICE OFFICER STEEL (FD-84(M)/1003)

Top made of 18/19mm thick both side prelaminated MDF board having surface colour as approved by Engineer-in-Charge. Sides of the MDF board shall be fixed with PVC edge band tape duly matched the colour with the board all as directed.

Drawer made of 22 gauge MS sheet with a coat of red oxide primer .

Six levers Lock of Godrej/Harrison with duplicate keys.

Cutting down wornout portion of MS Tube of the steel frame and replace with 25mm dia 1.6mm wall thickness MS tube in one piece not less than 250mm duly welding to bring into original size as per drawing, applying of red oxide primer after preparation of surface. Upto 300mm long and piece will be counted as one.

PVC Shoe at bottom of the leg of the table.

Charpoy GI Pipe with Plytop: (FD-220)

3 way Galvanized Iron Elbow 32 mm dia. Note:- weight of each elbow shall not be less than 450 grams.

Galvanized iron check nut 32 mm dia Note :- weight of each check nut shall not be less than 125 grams.

Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed.

Short rail converted out of retrieved long rail, item No 6 (6.03) above incl cutting, threading as required and directed.

Leg converted out of retrieved short rail, item No 6 (6.04) above incl cutting, threading as required and and directed .

Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each leg converted out of retrieved short rail.

12mm thick ply wood top BWR Grade ISI Marked of size 1950mm x 900mm (Single piece). Duly fitted with two no. 6mm thick x 50 mm width MS flat strip of 900 mm long by drilling four nos screw to long rail. All as specifed.

CHAIR WRITING MAP (FD/E6/MAP/12)

Replacement of exising tapestry of seat frame with new tapestry cloth of seat frame approved by Engr-in-Charge with PVC liping all round complete all as specified and directed by Engr -in Charge. Note- Cost of tapestry not less than Rs 200/ RM.

All as per item No (7.01) above but for back frame.

Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, complete all as specified.

Rubber stopper at the bottom of leg.

BED HARD STEEL( FD/E6/MAP/08(R))

12mm thick ply wood top of size 1950mm x 900mm (Single piece) BWR Grade ISI Mark with MS screws, complete all as specified.

18mm thick prelaminated particle board at head side of the bed as specified.

18mm thick prelaminated particle board at foot side of the bed as specified.

PVC shoes at the bottom of leg.

Chair Verandah (FD-256, 259, 359)

Taking out old U/S cane/newar and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, and welding UNSV frame, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge.

PVC/Rubber shoes as per sample approved

CHAIR executive long back lethaerate (TP)

Replacement of complete seat with new moulded foam cushioned 40mm density as shape and size covered with letherate as approved along with PVC liping all round, complete all as specified.

All as per item No (10.01) here-in-before but for back frame

Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Pedestal assembly complete with hyradlic shocker as directed by Engr-in-Charge.

Twin wheel coasters press fitted at the bottom of leg.

Briefing chair with writing pad complete Godrej PCH-1712

Re-canning of Chair Writing as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-Charge.

Replacement of writing pad with new MDF board writing board and directed by Engineer-in-Charge.

Writng Pad fix with sutable screws

Rubber stopper at the bottom of leg.

Painting of the following furniture items: Remove old paint and complete scraping and filling with putty and denting if required followed by two coat of synthetic enamel paint with spray Gun (colour as approved and directed by Engineer-in-Charge) after preparation of surfaces :-

Almirah Steel Large with Shelves, FD-351/1031

Almirah Small/medium steel (FD-350 /1032/243)

Locker Bedside Steel ( FD-257/1029)

Chair CB steel with arms/ without arms ( FD-75(M) )

Table office clerk steel (FD-84(M)/1004)

Table officer officer steel

Chair writing MAP(FD/E6/MAP/12

Chair Verandah (FD-256, 259, 359)

Bed Hard FD/E6/MAP/08(R )

Briefing chair with writing pad complete Godrej PCH-1712

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

VEE KAY IND (BID ID -3138137)

JAINCO STEEL INDUSTRIES (BID ID -3123252)

Pleiad Complex On (BID ID -3131529)