Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 101 C 1ST FLOOR PAL HOUSE HARI NAGAR ASHRAM NEW DELHI 110001 | NEW DELHI | NEW DELHI | DELHI | 110014 | Admitted-Finance |
| 2 | Not Admitted-Fee/PreQual/Technical PALAMPUR BHUANA DISTT KANGRA H P 176103 | PALAMPUR | KANGRA | HIMACHAL PRADESH | 176103 | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹53.8 L
EMD Value
₹1.1 L
Closing Date
17 Jan 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
HIMUDA Division Nahan Distt Sirmour HP
Self Financing Scheme at Basal Distt Solan HP SH Retrofitting of Reinforcement Cement Concrete Column and Beam of Block No 22 Specialized Job thereof
2024_HIMUD_83502_1
HIMUDA/ND/CB/eTender21- 15-24dt01.01.2024
Open Tender
Civil Works
Item Rate
180 days
Solan
Please refer Tender documents.
9 documents required · 9 mandatory
₹5,900
Yes
₹1.1 L
Yes
20 May 2024
3 Jan 2024
18 Jan 2024
3 Jan 2024
17 Jan 2024
3 Jan 2024
Excavation upto the Foudation of column approx @ upto 5.6 mtr depth and 1.5mtr width, 1.5 mtr length below the ground level including fixing of props or M.S. Jack system including all leads and lifts. Pick and Jumper Work (By Manual Means)
Chipping of Plaster/Concrete Upto cover: Chipping of plaster/concrete upto cover only for making better bonding in between old and new concrete including tapering all edges upto 50mm thickness including carriage of material in all leads and lifts.
Supply and apply of rustremover cum passivator to remove rust from existing reinforcement, Rust remover material, Consumption: 0.2kg/m2/coat, Density: 1.01 kg/l at 30 deg celcius including carriage of material in all leads and lifts.
Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement Corrosion Inhibitor, Product requirements: Carbonation resistance: 2mm of Corrosion inhibitor corresponds to 20mm of normal mortar ; bond strength> 1N/mm2 according to ASTM C 882-78 including carriage of material in all leads and lifts.
P & F of Extra 8mmX 120MM deep L-type shear rebar connector Providing extra rebar with Hilti RE 500 V3 chemical Or its Equivalent chemical including power drilling ,cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond and straightning, cutting , bending, placing in position, binding with GI wire of 18 gauge. Complete in all respects excluding the cost of steelincluding carriage of material in all leads and lifts.
P & F of Extra rebar 16mm dia*300mm depth Vertically: Providing extra rebar with Hilti RE 500 V4 chemical or its equivalent including power drilling ,cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond and straightning, cutting , bending, placing in position, binding with GI wire of 18 gauge. Complete in all respects excluding the cost of steel including carriage of material in all leads and lifts.
Providing extra reinforcement with TMT bars as per site design requirement including straightning, cutting, bending, placing in position, binding with G.i. wire of 18 gauge etc. complete in all respects. Additional reinforcement with adequate lap length & rings at required spacing shall be tied with existing reinforcement using binding wire or welded complete as per site requirements and direction of EIC including carriage of material in all leads and lifts.
P, M & A of epoxy resin bonding agent concrete: Providing, mixing & applying two component epoxy resin concrete bonding coat on prepared Rcc surfaces as per manufacture specification excluding preparation of surface by chippimg and thoroughly cleaning of surface complete wherever required including carriage of material in all leads and lifts.
P & F of water tight shuttering:Providing and fixing water tight centring and shuttering including carriage of material in all leads and lifts.
S & A of non-shrink cement micro concrete Supply and apply a ready to use non shrink, cementitious free flow microconcrete Product: Microconcrete ready to use material Yield: Approx 17ltr/bag (30kg) Product requirements: Compressive strength>60 N/mm2(28 days) according to ASTM C 1107-99 including carriage of material in all leads and lifts.
Drilling and fixing injection packers in RC members including, Drilling Holes: Drilling holes in structural members at the intervals as per recommendation of engineer in charge. Cleaning of holes: Clean the holes by air blower prior to fixing nozzles. Fixing of Packers: Insert 12 mm dia., 50~75 mm non corrosive type long injection packers in cleaned holes with mositure insensitive epoxy resin based putty or equivalent. Cutting of Packers: Cut the packers by cut of wheel after completion of grouting without damaging structural elements. including carriage of material in all leads and lifts.
Supply a moisture intensive, epoxy resin based injection grout for wet or damp location. Very Low viscosity epoxy material: 100 cps at 35 deg cel Mixed Density: 1060 kg/m3 Product requirements: Tensile strength 30 N/mm2 ; compressive strength >93 N/mm2 after 7 days. including carriage of material in all leads and lifts.
Providing & Fixing injection lance with sacrificial tip arrangement at bottom in vertical direction - including drilling holes on floor, inserting lances up to 2mtr depth, cleaning with compressed air, sealing hole, cost includes supply and installations of lances, lifting device, remove/cut off from the top flush with the existing floor finish after completion of job, etc. complete. As per Specification and instructions of engineer in-charge. including carriage of material in all leads and lifts.
Materials to be injected in vertical lances; Supplying & injecting low viscous, expanding soil injection resin - into soil to enhance engineering properties of soil, to be injected Using Appropriate injection pump, injection with recommended pressure and proper delivery rate, including cost of materials viz. Injection pump. compressed air, breaded hose pipe, consumables, PU cleaner, labour charges, etc. All the safety measures to be taken confirming to the Application methods as per product data sheet with all leads and lifts etc. complete as per specifications and as directed by Engineer-In charge. Technical points and properties of material polyurethane-based Duromer resin.- Low-viscosity polyurethane-based expansion resin (45 mPa-s)- Rigid polyurethane foam - Water-displacing - Expansion ratio > 10 - Solvent-free, environmentally safe.- Good chemical resistance including carriage of material in all leads and lifts.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .