Certain repairs to boundary wall including connected work of installation buildings under AoR of AGE E/S-lI under AGE (I) (U) B/R Delhi Cantt-10

Amount

Taking down cement plaster, any description from brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers,under layer 12mm cement plaster 1:4 (1 cement :4 coarse sand) furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 3 Kg of cement per square metre,top layer 15mm cement plaster using white cement in the top layer of the item of washed Marbal stone chipping grit plaster 1:1/2:2(1 White Cement:1/2 coarse sand:2 Marbal stone chipping 10mm nominal size) including pigment(colour) to be added as per approved by Engr-in-Chrage in panels with groove all around as per approved pattern including scrubbing and washing,the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engr-in Chrage (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removalof wooden battens,repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Chrage.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer (chalk whiting ) complete all as specified and as directed.

Demolition of reinforceme concrete work as in any position and in any position not other wise provided for complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions arches , pillar etc but excluding ashalar facing dressed stoen and pre-cast concrete articles.

M&L for brick work using sub class 'B' brick old size in cm (1:6) straight or curved on plan exceeding 6.00 mtr mean radius , complete all as specified and as directed.

M&L for reinforced cement concrete nominal mix type B-1 (1:2:4) using 20mm grared aggregate as in coping, beams, cantilevers, lintel band, bressummers, lintels over 1.5 m span etc complete all as specified and directed.

Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete.

M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, coping, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20cm wide for fair finished surfaces.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cracking, bending, spirally for hopping for columns hookings ends and binding with and incl mild steel wire (annealed) not less the 0.9mm dia or securing with clips complete.

- ditto - all as per above item No. 12 but 5mm dia and over upto 10mm dia in stirrups, spacers and binders complete.

Dismantling concrete posts or struts (wood,steel or R.C.C.) any section, icluding taking out embeded portion and making good disturbed ground by leveling ramming to true surface complete all as specified and directed.

S&F of angle iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc and similar work conforming to FE -290 Gde E-165 complete all as specified and directed.

S&F in repairs galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or typing at crossing with and provision of galvanised MS wire stapples or steel pins etc as directed (each line wire to be measured).

M&L for preparation of new steel / iron surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified & directed.

SURESH KUMAR SHARMA & CO

M/s SAAR ENGINEERS

HANUMAN BUILDERS

UNIQUE BUILDERS

M/S MSD & Associate

Dk Enterprises