Renovation of 6nos type VII quarters in Maharani Bagh Complex of School of Planning and Architecture (SPA), Maharani Bagh, New Delhi

Name of Work : Special Repair works at Type 7 Qtr

Sr. No DSR-23 Description Unit Type-7 qtr Rate DSR amount NDSR Amount

STRUCTURAL REPAIR & RETROFITTING

1.00 26.28.2 Chipping of unsound/weak concrete material from slabs, beams, columns etc.

with manual Chisel and/ or by standard power driven percussion type or of

approved make including tapering of all edges, making square shoulders of

cavities including cleaning the exposed concrete surface and reinforcement

with wire brushes etc. and disposal of debris for all lead and lifts all complete as

per direction of Engineer-In-Charge 50mm average thickness

2.00 26.29.1 Cleaning of reinforcement from rust from the reinforcing bars to give it a total

rust free steel surface by using alkaline chemical rust remover of approved

make with paint brush and removing loose particles after 24 hours of its

application with wire brush and thoroughly washing with water and allowing it

to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm

diameter Sqm 36.98 8.25 305.06

3.00 M.R Providing and supplying the one competent, Polymer modified cementitiuos

anti- corrosive primer (having the technical parameters mentioned in material

specifications ) formulated to provide dual protection of a polymeric barrier

and an integral corrosioninhibting system, to the existing steel and additional

steel provided before patching of damaged areas, using suitable tools and

equipment inclusive of Material, Manpower and Equipment. BASF Master

Emaco P130/ Fosroc Nitoprime Zincrich /Sika Rustoff 100 or other equivalent

(mode of measurement - concrete surface area with exposed reinforcement)

4.00 26.31.2 Providing, mixing and applying bonding coat of approved adhesive on chipped

portion of RCC as per specifications and direction of Engineer-In-charge

complete in all respect.Epoxy bonding adhesive having coverage 2.20 sqm/kg

of approved make sqm 24.32 285.20 6936.35

5.00 26.30.1 Drilling suitable holes in reinforced or plain cement concrete with power driven

drill machine to a minimum depth of 100mm upto 200mm in RCC beams,

lintels, columns and slabs to introduce steel bars for sunshades/balconies

including fixing the steel bars in position using epoxy resin anchor grout of

approved make but excluding the cost of reinforcement, all complete as per

direction of Engineer-In- Charge. Upto and including 12mm dia.

6.00 5.22B.1 Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of

approved make from factory / workshop to construction site including placing

in position and binding all complete upto plinth level. Thermo-Mechanically

Treated bars of grade Fe-500D or

7.00 M.R Providing and repairing the damaged concrete portion with single compnent,

fibre reinforced, dual shrinkagecompensated hixotropic, cementious ptch

repair mortar ( having the technical parameters mentioned in material

specifications ) capable of applying 25mm thick in single layer initially by hand

and finishing with trowed carefully compacting the same around the rebars and

finishing to bring it in line with existing concrete surface withh an average

specified thickness inclusive of manpower , material and Equivalent Master

Emaco 5348 of BASF Renderoc HB-60 of osroc/Sikadur 41 of Sika or equivalent.

8.00 REPAIR TO PLASTER & PLINTH PROTECTION

9.00 4.17 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 sqm

coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate

20 mm nominal size derived from natural sources) over 75mm thick bed of dry

brick ballast 40 mm nominal size, well rammed and consolidated and grouted

with fine sand, including necessary excavation, levelling & dressing & finishing

the top smooth.

10.00 Dismantling old plaster or skirting raking out joints and cleaning the surface for

15.56 plaster including disposal of rubbish to the dumping ground within 50 metres

11.00 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6

(1 cement: 6 fine sand) sqm 368.27 383.00 141048.08

12.00 13.80 Providing and applying white cement based putty of average thickness 1 mm,

of approved brand and manufacturer, over the plastered wall surface to

prepare the surface even and smooth complete.

13.00 Painting with synthetic enamel paint of approved brand and manufacture to

13.61.1 give an even shade :

Two or more coats on new work sqm 23.91 155.90 3727.34

14.00 Distempering with 1st quality acrylic washable distemper (ready made) having

VOC content less than 50 gm per ltr. of approved manufacturer and of required

shade and colour complete as per manufacturer's specification. Two coat

15.00 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone

13.47.1 additives of required shade : New work (Two or more coats applied @ 1.43 ltr/

10 sqm) over existing cement paint surface. sqm 201.49 171.10 34475.74

16.00 OF DOOR / WINDOWS

17.00 Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead:

18.00 15.13.1 Of area 3 sq. metres and below Each 15.00 143.50 2152.50

19.00 26.88 Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid decorative type flush door shutter of required size comprising

of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/

cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum

compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant. WPC to be

laminated with PVC foil of minimum 14 microns thick of approved design

pasted with hot melt adhesive on both faces of shutter and fixing with stainless

steel butt hinges of required size with necessary full body threaded star headed

counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note:

stainless steel butt hinges and necessary S.S screws shall be paid separately) 30

22.00 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded

and prepolished, machine cut for kitchen platforms, vanity counters, window

sills, facias and similar locations of required size,approved shade, colour and

texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse

sand), joints treated with white cement, mixed with matching pigment, epoxy

touch ups, including rubbing, curing, moulding and polishing to edges to give

high gloss finish etc. complete at all levels. Granite of any colour and shade

25.00 Providing and fixing factory made uPVC white colour fixed glazed windows /

ventilators comprising ofuPVC multi-chambered frame and mullion (where

ever required) extruded profiles duly reinforced with 1.60± 0.2 mm thick

galvanized mild steel section made from roll forming process of required length

(shape & size according to uPVC profile), uPVC extruded glazing beads of

appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing

frame to finished wall, plastic packers, plastic caps and necessary stainless steel

screws etc. Profile of frame shall be mitred cut and fusion welded at all corners,

mullion (if required) shall be also fusion welded including drilling of holes for

fixing hardware's and drainage of water etc. After fixing frame the gap between

frame and adjacent finished wall shall be filled with weather proof silicon

sealant over backer rod of required size and of approved quality. all complete

9.147.C1.1as per approved drawing & direction of Engineer-in-Charge. (Single / double

glass panes and silicon sealant shall be paid separately) .Make NCL ,

Prominance ,Winpro Note: For uPVC frame, sash and mullion extruded profiles

minus 5% tolerance in dimension i.e. in depth & width of profile shall be

acceptable. Variation in profile dimension in higher side shall be accepted but

no extra payment on this account shall be made.Fixed window / ventilator

made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having

wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate

dimension. Using R1 series with frame (33 mm & above) x (35 mm & above).

(Height upto 0.90 metre)

26.00 Providing and fixing factory made uPVC white colour sliding glazed window

upto 1.50 m in height dimension comprising of uPVC multi-chambered frame

with in-built roller track and sash extruded profiles duly reinforced with 1.60 ±

0.2 mm thick galvanized mild steel section made from roll forming process of

required length (shape & size according to uPVC profile), appropriate

dimension of uPVC extruded glazing beads and uPVC extruded interlocks,

EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with

hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40

kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and

necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut

and fusion welded at all corners, including drilling of holes for fixing hardware's

and drainage of water etc. After fixing frame the gap between frame and

adjacent finished wall shall be filled with weather proof silicon sealent over

backer rod of required size and of approved quality, all complete as per

approved drawing & direction of Engineer-in-Charge. (Single / double glass

panes, wire mesh and silicon sealent shall be paid separately)Make NCL ,

Prominance ,Winpro Note: For uPVC frame and sash extruded profiles minus

5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Variation in profile dimension in higher side shall be accepted but no extra

payment on this account shall be made.Two track two panels sliding window

made of (big series)Using R3 series with frame (85 mm & above) x (40 mm &

above) & glazed sash (30 mm &

above) x (55 mm & above) & fly screen sash (20 mm & above) x (50 mm &

above) with zinc alloy (zamak) powder coated handle on every glazed panel

along with multi-point locking

system. (Height upto 1.8 metre). Sqm 49.06 9968.70 489108.28

27.00 9.83 Providing and fixing Stainless steel body tubular type universal hydraulic door

closer (having brand logo , embossed on the body, door weight upto 35 kg and

door width upto 700 mm), with necessary accessories and screws etc. complete

. Code DC512S Make Kich

28.00 Providing and fixing Stainless steel body SS 316 Grade tower bolts, satin finish ,

9.97.2 with necessary screws etc. complete : 250x10 mm Each 8.00 115.15 921.20

29.00 9.165.1 Providing and fixing bright /matt finished Stainless Steel handles of approved

quality & make with necessary screws etc all complete.125 mm

30.00 9.97.3 Providing and fixing Stainless steel body SS 316 Grade Wall mounted door

stopper,Satin finish , with necessary screws etc. complete.Code DST75S Make

31.00 Providing and fixing Stainless steel body SS 316 Grade hanging floor door

9.101.2 stopper, Satin finish, with necessary screws etc. complete. Twin rubber stopper

32.00 Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door / window/Ceosetory windows & other Frames

/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension

Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

fabricated with miter joints after applying PVC solvent cement and screwed

with full body threaded star headed SS screws having minimum frame density

of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),

minimum compressive strength of 58 N/mm2, modulus of elasticity 900

N/mm2 and resistance to spread of flame of Class A category with property of

being termite/borer proof, water/moisture proof and fire retardant and fixed in

position with M.S hold fast/lugs/SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash

fasteners shall be paid for separately).Note: For WPC solid door/window

frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall

be acceptable. Variation in profile dimensions on plus side shall be acceptable

payment on this account shall be made. 0.00

34.00 MODULAR KITCHEN

35.00 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame

(45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on

both sides, made from rigid foam sheets (Single extruded) having density 600 Kg/cum

and the exposed edges sealed with PVC edge beading of same shade and colour. The

frame shall be fire retardent with necessary screw holding capacity. Frame shall be

fixed to wall using Expendable Fastner with necesary stainless steel screws, all

complete as per direction of Engineer-in-charge.

36.00 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal

thickness of approved shade, quality and make, made from rigid foam sheets (Single

extruded) having density 600 Kg/cum and laminated on both side by laminate

Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading

of same shade and colour. The shutter shall be fire retardent having necessary screw

holding capacity. Shutter shall be fixed to frame using approved hinges with necessary

stainless steel screws, all complete as per direction of Engineer-in-charge.

37.00 Providing and fixing concealed hinge of approved quality for 19-20mm thick door with

26.11 stainless steel screws complete : Pair 105.00 144.05 15125.25

38.00 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels

of approved make 500 mm long with screws etc. complete as per directions of One

9.172 Engineer- in-charge. set 56.00 885.10 49565.60

39.00 9.173 Providing and fixing ready made 304 grade stainless steel Modular kitchen

basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition,

Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain

basket, Multipurpose basket as per site requirement including finishing (wherever

required) and fittings. The same shall be fixed with necessary stainless steel nuts &

bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-

incharge. (For payment purpose only weight of Stainless steel basket shall be

considered excluding weight of all fixing accessories such as nuts, bolts, fasteners

telescopic basket channels etc. Payment of providing and fixing telescopic channel

9.173 shall be paid separately) Kg 630.70 533.25 336320.78

40.00 REPAIR TO FLOORING

41.00 Dismantling tile work in floors and roofs laid in cement mortar including

15.23.1 stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

42.00 Mirror polishing on marble work/Granite work/stone work where ever required

to give high gloss finish complete sqm 21.01 506.70 10644.16

43.00 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours and

shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)

jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with

white cement and matching pigments etc. The tiles must be cut with the zero

chipping diamond cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required thickness, leveling system and rubber

mallet for placing the tiles gently and easily.

44.00 11.41A.2.1Glazed vitrified floor tiles polished finish of size Size of Tile 600 x 600 mm

45.00 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer ), with water absorption less than 0.08 % and conforming to I.S.

15622, of approved make, in all colours & shade, in skirting, riser of steps, over

12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white

cement & matching pigments etc. complete. Size of Tile 600x600 mm

46.00 REPAIR TO TOILETS

47.00 15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

48.00 Dismantling precast concrete or stone slabs in walls, partition walls etc.

including stacking within 50 metres lead : Thickness up to 40 mm sqm 289.30 0.00

49.00 15.52 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

stacking of useful materials near the site and disposal of

unserviceable materials within 50 metres lead. Each 114.00 112.05 12773.70

50.00 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approvedmake, in all

colours, shades except burgundy, bottle green, black of any size as approved by

Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed

of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment

of matching shade complete.

51.00 11.41A. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm

52.00 14.80.2 Providing & fixing White vitreous china water closet squatting pan (Indian

type) along with "S" or "P" trap including dismantling of old WC seat and "S" or

"P" trap at site complete with all operations including all necessary materials,

labour and disposal of dismantledmaterial i/c malba, all complete as per the

direction of Engineer-in charge. Long pattern W.C Pan of size 580x440 mm each

Orissa pattern W.C Pan of size 580x440 mm

53.00 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single

hole basin mixer of approved quality and make, including painting of fittings

and brackets, cutting and making good the walls wherever required:- (a) White

Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole

basin mixer Each 12.00 3960.55 47526.60

54.00 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality &

make and as per the direction of Engineer-in-charge. Each 12.00 1034.80 12417.60

55.00 M.R Providing and fixing Health facad with 8mm Dia, 1.00 M long Flexible Tube &

Wall hook arrangement Model No- ALD-573 , of Jaquar or equivalent make

56.00 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

approved quality) complete with 6 mm thick hard board ground fixed to

wooden cleats with C.P. brass screws and washers complete.

57.00 M.R Providing & fixing cockcroch trap S.S. grating of approved design for floor traps

etc. including setting in floor with cement mortar. 100 mm dia

58.00 18.50.1 Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms. 15 mm

nominal bore Each 24.00 820.70 19696.80

59.00 17.22 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C.

60.00 18.22.2 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :150 mm

diameter Each 12.00 222.35 2668.20

61.00 MR-1 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings

type B for sewerage waste discharge system (IS:13592 : 1992 Marked) of

approved quality /make supreme, jain pipes, sudhakar, prince or equivalent

64.00 Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings

type B for sewarage waste discharge system (IS:13592 : 1992 Marked) of

approved quality /make

65.00 Bend of required degree with access door,

70.00 Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE

Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon

black having thermal stability for hot & coldwater supply, capable to withstand

temperature up to 80°C, including all special fittings of composite material

18.1 (engineering plastic blend and brass inserts wherever required) e.g. elbows,

tees, reducers, couplers & connectors etc., with clamps at 1.00 metre

spacing.This includes testing of joints complete as per direction of the Engineer-

in-charge. INTERNAL WORK - EXPOSED ON WALL

74.00 18.86.1 Providing and fixing Stainless Steel pipe and fitting of grade AISI 304 as per JIS

standard 3448 complete with press type fitting (fitting shall be paid for

separately) i/c fixing of the pipe with clamps at 1.00m spacing and also

including cutting of chases and making good the walls including testing of joints

complete as per direction of Engineer -in-charge. ( The pipe length inserted in

the fitting shall not be measured for payment) Internal work -Concealed Pipe

15.88 mm outer dia pipe. Make Alfa press

75.00 Providing and fixing required Stainless Steel Fitting of press fit design of grade

AISI 304 conforming to JWWA G116 standard with V -profile or M- profile and

with O-ring sealing gasket of EPDM material of required dia as per dirction of

Engineer -in -charge.

76.00 Coupling/Socket

80.00 Reducer 0.00

83.00 18.88.1 For 42.70 mm x 34.00 mm outer dia pipe

84.00 18.88.1 For 48.60 mm x 34.00 mm outer dia pipe

86.00 18.90.1 For 15.88mm outer dia pipe Each 25.00 99.60 2490.00

89.00 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed

90.00 18.19.1.2 25 mm nominal bore (Vertical) Each 12.00 624.10 7489.20

91.00 18.19.2.2 32 mm nominal bore(Vertical) Each 6.00 850.25 5101.50

92.00 18.20.2 Providing material and labour for fixing brass ferrule with C.I. mouth cover

including boring and tapping the main : 20 mm nominal bore

93.00 18.18.3 Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete : 25 mm nominal bore Each 1.00 464.05 464.05

TO ROOF (WATER PROOFING)

Demolishing brick tile covering in terracing including stacking of serviceable

material and disposal of unserviceable material within 50 metres lead.

97.00 Demolishing mud phaska in terracing and disposal of material within 50 metres

98.00 (Bathroom & Balcony) Providing and laying two coats of a Two Component,

Cementitious Crystalline Coating System, such as SS – CrystoSeal 2K,assess

chem upto 900 mm over the FFL on the vertical wall surface and on the

complete slab surface post construction and curing or fillets on the joints of

walls & floor. The Crystalline Coating system is to be mixed and applied as per

the manufacturer’s recommendations and water cured for a period of atleast 5

days, preferably 7 days. Consumption: 2.5 kg [2 kg SS – CrystoSeal 2K

Component A (Powder) with 0.20 kg SS – CrystoSeal 2K Component B (Liquid)

and 0.3 to 0.35 kg water] / m2. Sprinkling sharp dry silica sand over the second

coat to provide mechanical key for screed. Applying a dash / chhaat coat over

the coating, wet-in-wet.

99.00 Grading roof for water proofing treatment with Cement concrete 1:2:4 (1

22.14.1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

100.00 11.3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate) finished with a floating coat of neat cement, including cement

11.3.1 slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with

20 mm nominal size stone aggregate

101.00 Extra for making chequers of approved pattern on cement concrete floors,

steps, landing, pavements etc. Sqm 45.71 83.85 3833.01

102.00 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4

stone aggregate 10 mm and down gauge) including finishing with cement

mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep

103.00 Making khurras 45x45 cm with average minimum thickness of 5 cm cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm

nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm

cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,

rounding the edges and making and finishing the outlet complete.

104.00 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed

pipes. 110 mm diameter metre 28.00 377.40 10567.20

105.00 Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving

10 mm gap for thermal expansion 0.00

106.00 Shoe (Plain) 110 mm

107.00 Providing and fixing unplasticised -PVC pipe clips of approved design to

unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood

plugs, screwed with M.S. screws of required length, including cutting brick work

12.43.2 and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good

the wall etc. complete. 110 mm

108.00 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15

cm diameter and weighing not less than 440 grams. Each 8.00 12.44 99.52

INTERNAL WIRING & FAN /LIGHT

105.00 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

recessed steel conduit, with piano type switch, phenolic laminated sheet,

suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

108.00 1.90 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit, 2

way piano type switch, phenolic laminated sheet, suitable size MS box and

earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single

core cable etc. as required.

109.00 1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium

class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper

conductor single core cable for loop earthing as required.

110.00 MR Supply, fixing and connection of 250 V below given mosaic wiring

accessories of M/s MDS or approved equivalent inlcuding supplying and

fixing of nuts, bolts, etc. complete with labour and materials as per

direction of the Engineer-in-Charge. 0.00

111.00 MR 6 amps. - 1 way - SP - 1 module switches each 161.00 89.55 14417.55

112.00 MR 2 pins - 1 module telephone socket each 35.00 142.36 4982.60

113.00 1.44 Installation, testing and commissioning of ceiling fan and regulator

including wiring the down rod of standard length (upto 30 cm) with 1.5

sqmm, PVC insulated, copper conductor, single core cable etc. as required.

114.00 MR Supply, installation, testing and commissioning of single phase , Fresh Air

Fans / Heavy duty Exhaust Fans of Bajaj/Crompton

Greaves/Khaitan/Usha make only including supply and fixing with all

necessary supports All complete with labour and materials as per

drawings, specifications and directions of Engineer-in-Charge.. NOTE:

Necessary civil works required for fixing the exhaust fans shall be in the

scope of Contractor. 0.00

115.00 MR Fress air fan with louver shutter 300 sweep each 21.00 1711.67 35945.07

116.00 NS-1 Supply, Installation, Testing & Commissioning of following lighting fixtures

complete with special electronics low loss ballast / tube / lamp / condenser /

starter / louvers / reflector / cover etc. & making connections form light point

outlet to the fixture with supply and installation of suitable size of PVC

insulated FRLS wire in G.I. flexible pipe (where ever required) etc. complete as

required. Note: -Final Selection of light fixtures shall be done by the

Architect/Owner. Make Halomax,Wipro,HAVELLS

117.00 NS-1.6 Linear profile light made of aluminium channel with diffuser LED strip with

bulk head light with LED light source:LED,WATTAGE :9W

120.00 SUB HEAD-X1: BRASS AND TERMINATION FOR LT CABLE.

121.00 9.10 Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor armoured cable of 1.1 KV

127.00 Supply, laying testing and commissioning of following sizes of XLPE insulated,

PVC sheathed, armoured Aluminum conductor cable of 1.1 KV grade on

existing cable tray / surface including clamps, ties etc. as required

128.00 MR 3.5 core 25 sqmm XLPE CABLE (AL) RM 174.80 0.00

129.00 MR 3.5 core 50 sqmm XLPE CABLE (AL) RM 353.05 0.00

130.00 MR 3.5 core 120 sqmm XLPE CABLE (AL) RM 557.75 0.00

131.00 MR 4 core 10 sqmm - XLPE CABLE (AL) RM 184.00 0.00

132.00 MR 4 core 16 sqmm - XLPE CABLE (AL) RM 230.00 0.00