Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.7 L
EMD Value
₹7,500
Closing Date
21 Oct 2026, 5:00 pm3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
R.D Spl Division, Godda.
Construction of Rain Water Harvesting in 23 numbers of Anganwadi Centres, Block - Poriyhat, District - Godda
2026_RDSPL_119823_1
RWD/SD/GODDA/22/2026-27 (Group No 05)
Open Tender
Civil Works
Percentage
90 days
PORIYAHAT
Please refer Tender documents.
2 documents required · 2 mandatory
₹750
₹7,500
13 Oct 2026
13 Oct 2026
23 Oct 2026
13 Oct 2026
21 Oct 2026
13 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth as obtained to a distance up to 50M all complete as perbuilding specification and direction of E/I. | 64.4 | M3 | 150.29 | ₹9,678.68 |
| - | Earth work in back filling the trench after laying different types and sizes of pipes with earth removed during excavation within initial lead and lift as per specification and direction of E/I.
(For Classification of Soil Item - A & B) | 54.74 | M3 | 93.93 | ₹5,141.73 |
| - | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item - A+B) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. | 18.4 | M3 | 167.33 | ₹3,078.87 |
| - | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume) | 1.38 | M3 | 589.51 | ₹813.52 |
| - | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. | 16.79 | M2 | 330.34 | ₹5,546.41 |
| - | Providing designation 75B brick work in C.M (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth, curring, taxes and royalty all complete as per builiding specification and direction of E/I. | 32.89 | M3 | 5,110.26 | ₹1,68,076.45 |
| - | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 1.38 | M3 | 4,598.23 | ₹6,345.56 |
| - | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). | 2.07 | M3 | 6,308.87 | ₹13,059.36 |
| - | Providing TMT steel reinforcement as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
8mm dia bar | 0.05 | MT | 83,314.02 | ₹3,832.44 |
| - | Providing TMT steel reinforcement as per approved design and drawing excluding carriage of M.S bar to work site, cutting, bending end binding with annealed wire with cost of wire removal of rust placing the rods in position all complete as per building specification and direction of E/I.
10mm dia bar | 0.09 | MT | 82,096.56 | ₹7,552.88 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.73 MB
TENDERDOCUMENT.pdf
Tender Documents • 0.68 MB
BOQ_162129.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .