REPAIR OF FENCING, BOUNDARY WALL AND PATH /CULVERTS, HARD STANDING / PAVEMENTS AND REPAIR /MAINT TO AREA DRAINAGE, COVER SLABS, COMPOUND WALL / SECURITY FENCING , GATES AND GATES PILLARS AT LOWER LEIMAKHONG MIL STN

Amount

B/R WORK

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5m in depth for foundation of laying of pipe etc, not exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and as directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and as directed.

Demolition of cement concrete (reinforced) in ground floor and pavings any description, any thickness below or above ground level complete all as specified and directed.

M&L for RCC M-15 grade (Nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for Providing precast reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional arean exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling fencing wire mesh chain link fencing etc, any type complete all as specified and directed.

S&F MS angle iron as in posts and struts as in fencing including cutting tops to shape as directed, drilled holes notching for wire etc incl all necessarydrilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165.complete all as specified and directed.

M&L for MS works as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends each screwed end be fitted with washers and one hexagonal or square nut exc 5 cm but n.exc 10 cm long and dia of shank 11 to 15 mm complete all as specified and as directed.

M&L for PCC 1:3:6 Type C2 using 40 mm graded aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases).complete all as specified and as directed

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

S & F in repairs for 4mm dia Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured).complete all as specified and directed.

M&L for prepraration of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for two coats of Black japan paint on steel surfaces of any description over 10cm width or grith including preparation of new surfaces and applying one coat of red oxide primer.complete all as specified and directed

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:4) complete all as specified and directed.

All as per item No 21 above but except materials.

M&L for PCC type M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate as in coping incl necessary formwork complete all as specified and directed.

M & L Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface fair and even without extra using cement complete all as specified and directed.

M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

M&L for 75 mm thick PCC M7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed.

M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry with grey cement and pigment in floors to match complete all as specified and directed.

M&L for sand cushioning layer under the floors and hand level surface including watering and consolidation to receive floor tiles.complete all as specified and directed.

M & L for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with gray cement and pigment complete all as specified and directed.

M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 100mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L 50mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface or making impression of expanded metal whilst the concrete is green.(Sand :- Dimapur).complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed

M&L for Endura vitrified paving tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.

Dismantling of existing RCC/ Steel /Wooden posts or struts (wood, steel or R.C.C.) any section,concrete ,brick work ,massonery etc . including taking out embedded portion and making good disturbed ground complete all speciified and directed

M&L for removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in lime or cement mortar; not previously plastered; and scrubbing down with water etc. to receive plaster complete all speciified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M & L for rendering 10mm thick plaster in cement mortar (1:4) on fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

S&F 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over and including12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M & L for preparation of old plastered/concrete surfaces and applying two coats of white wash on wall complete all as specified and directed

S&F steel flat iron including necessary drilling hole bolting or reveting etc and similar work complete conforming to Fe-290 Gde E-165 complete all speciified and directed

M & L for pre-cast cement concrete type B-1 (1:2:4) 20 mm graded aggregate cement concrete block masonry with solid blocks exc.10 cm in width and setting in cement mortar (1:4) complete all as specified and directed

M & L for PCC M (1:4:8) type D2 using 40mm graded stone aggregate , as in foundation, filling and mass concrete complete all as specified and as directed.

M & L for preparation of new or old concrete surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cm (1:6) complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling,uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc. 20mm granite or trap stone. complete all as specified and directed.

Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in cement mortar. complete all as specified and directed.

M & L Raised pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement mortar ( 1:4) complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410 (Grade E-250) quality-A complete all as specified and as directed.

M & L for precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) in coverslabs (for drains etc) with plain fair faces including chamfers, weatherings, throating etc and similar works set in CM (1:4) as complete all as specified and as directed

M&L for prepraration of new or untreated surfaces of steel/iron of any description, not over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for restraining and resecuring including making good of Plain mild steel wire, galvanised chain link fencing including straining and refixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall complete all as specified and directed.

L BINOD CONSTRUCTION CO

MAURYA CONSTRUCTIONS

MANI PRASAD GUPTA

M/s Ritz Marketing

APPLE CONSTRUCTION