Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹13.4 LAccepted-AOC NO 49 MSN NILAYAM 3RD CROSS HILL VIEW GARDEN TUNAHALLI SUBRAMANYAPURA POST BANGALORE 560061 | BANGALORE | BANGALORE | KARNATAKA | 560061 | ₹13.4 L | L-1 | Accepted-AOC BEING FIRST LOWEST |
| 2 | L-2₹14.0 L+₹54,940.70 (4.09%)Rejected-Finance NO 12 5TH B CROSS SHARADAMBA NAGAR M E S ROAD BANGALORE 560013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | ₹14.0 L+₹54,940.70 (4.09%) | L-2 | Rejected-Finance BEING NOT LOWEST |
| 3 | L-3₹14.6 L+₹1.1 L (8.48%)Rejected-Finance | ₹14.6 L+₹1.1 L (8.48%) | L-3 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹15.3 L
EMD Value
₹30,500
Closing Date
23 Jul 2020, 6:00 pmClosed
GE (AF) MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
PROVN OF INTERLOCKING TILES IN DEPOT HQ AREA OF 26 ED (AF) UNDER GE (AF) MARATHAHALLI BANGALORE.
2020_MES_358216_1
GE (AF) MARATHAHALLI / 8821 / E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) MARATHAHALLI
Class E above and Category a(I)
7 documents required · 7 mandatory
₹500
Yes
GE (AF) MARATHAHALLI
₹30,500
Yes
GE (AF) MARATHAHALLI
10 Nov 2020
3 Jul 2020
25 Jul 2020
3 Jul 2020
23 Jul 2020
6 Jul 2020
3 Jul 2020 - 6 Jul 2020
6 Jul 2020
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in hard/dense soil. all as specified and directed by Engineer-in-charge
Material and labour for PCC 1:4:8, type D2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting. all as specified and directed by Engineer-in-charge
Material and labour for precast cement concrete block masonry with solid blocks in PCC 1:3:6, type C1 using 20mm graded aggregate exceeding 10cm thk in width ( with plain or interlocking joints as directed) complete, in walls and set in CM 1:6, complete all as specified and directed by Engineer-in-charge
Material and labour for Hardcore of gauge 40 to 80mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface as in sub base as in floor or path after compacting well the existing layer of soil all as specified and directed by Engineer-in-charge
Material and labour for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in Surface channels and drains complete all as specified.
Material and Labour for Extra for forming fair finished drain or channel 20cm inner girth in cement concrete, using ex-tra cement including form, moulds mi-tred/stopped ends etc complete all as specified and directed by Engr-in-charge.
Removing excavated material/ debris exceeding 1.50 Km and not exceeding 5 Km and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.
Supply and Fixing framed work of rolled mild steel in joist, channel, angle or tee sections fixed independently, without connecting plates, etc (cut or ordinary iengths) i.e within 20mm of the length indicated to be measured under this item conforming ot Fe 410-W (Gde-E-250) quality A etc. complete all as specified and as directed by Engr-in-charge.
Material and labour for preparing of new steel surfaces not exceeding 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer, Complete all as specified.
Material and labour for preparing of new steel surfaces exceeding 10cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer, Complete all as specified.
Material and Labour for Designed trap / concrete stone kerb of roughly squared stones of size 15cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush Complete all as specified and directed by Engr-in-charge.
Material and Labour for laying of Rubber moulded concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade with minimum 4mm thick finishing of with cement and pigment of any colour over 50mm thick compacted sand cushion complete all as specified and directed by Engineer-in-charge. Make: M/s Bharat Tiles/Ultra Tiles or Mehtab Tiles
Material and Labour for preparation of new concrete/stone surfaces palin or moulded, exceeding 10cm width or girth when unconnected with other painting or when painted in a different tint of any descrription and applying two coats of Synthetic enamel paint over a coat of red oxide primer, Complete all as specified.
Shanthi Construction
S.R.V.Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .