Construction of New School Building at Dabhel, Nani Daman. (2nd Call) (Balance work)

Amount

Civil work

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(D) By mechanical means in area of thorny jungle

Filling in foundation and plinth with rubble soiling in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. (upto 10 ton)

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete (upto 10 ton)

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth (upto 10 ton)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Foundations, footings, Base of columns and Mass concrete as per direction of the Engineer - in - charge. (up than 10 ton)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Ground Beams & Plinth Beams upto floor level. (up than 10 ton)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Columns (up than 10 ton) Foundation to G.L

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Columns (up than 10 ton)(a) GROUND TO FIRST FLOOR

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (C) Chajja and lintel (upto 10 ton)(A) Ground Floor

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (UP than 10 ton)(i) foundation and plinth

(A) Ground Floor

Masonary work using Aerated light weight concrete block having crushing strength not less than 35 kg/sqcm for super structure above plinth level upto floor all level in cement mortar 1:5 ( 1 cement : 5 fine sand ) complete as per Technical Specification size 600x200x200mm(i) foundation and plinth

(A) Ground Floor

20mm thick sand faced cement plaster on walls to all height above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete EIC

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1‐cement : 6‐coarse sand) or L.M. 1.1.5 (1‐Lime putty :1.5 ‐ coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including ramp patti ,rubbing and polishing etc. complete. (A) 25mm thick (upto 10 ton) INCLUDING FLOORING SKIRTING

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing,groove etc. complete. (upto 10 ton) etc. complete as per EIC.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and mat/glossy finish and jointed with color cement slurry including finised with flush pointing & cleaning the surface and MAAT finished tiles to be used etc. complete for antiskit (upto 10 ton)

Providing and layingCeramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry (upto 10 ton) etc. complete as per EIC.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. as per Engineer in charge.

Repairing of existing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. as per Engineer in charge. (Removing and re-fixing in line & level including all materials and labour charges.)

Providing and fixing shot blasted paver block of M 250 grade of Super / Vyara / Duracrete 60 mm thick to be fixed on 75mm sand layer including joint filled up with coloured cement to match the shade of tiles and colour (in different colour combination) complete as directed by architect or engineering incharge.

Repairing and finishing of Under Ground water tank of M200 mix for R.C.C. work including approved water proofing cement compound or "CEMWET" or " PIDICRETE LW" integral water proofing admixture as water proofing agent to be mixed with 50 kgs. bags shall be as recommended by the manufacture of the water proofing material as required including necessary excavation & refilling the available earth, including locking arrengement outlet, inlet, overflow and washout outlet pipe arrengement as necessary & C.I. Cover 0.60 x 0.45 weight not less then 35 kg with locking arrengment. etc.as directed by Eng-in-charge. (Repairing and finishing of U.G. tank including man hole cover with all materials and labour cost.)

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Wall painting (One or more coats as required) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Painting two coats (including priming coat) on new steel and other metal surface with enamel paint, brushing, interior to give an even shade including redoxide and cleaning the surface an even shade including cleanicn the surface of all dirt, dust and other foreign matter.

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 12 cm x 7 cm. size including black enamelled iron oxidized fixtures and fastenings,face veneer or plywood face panels including primer coat of approved quality and two coats of oil painting etc, complete. (iii) Partly panelled and partly glazed.

Reparing and Finishing of 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 12 cm x 7 cm. size including black enamelled iron oxidized fixtures, s.s aldrop and fastenings,face veneer or plywood face panels including primer coat of approved quality and two coats of oil painting etc, complete. (iii) Partly panelled and partly glazed. (Finishing of door and frame including removing and re-fixing of existing frame with door if required with all fixtures as required to complete as directed by engineer-in-charge.)

Finishing wall with weather proof exterior emultion paint on wall surface (two or more coats) to give an required shape even shade after throughly brushing the surface to remove all dirt, and remains of loose powered materials. Etc Complete.

Finishing wall with weather proof exterior emultion paint on wall surface (One or more coats as required) to give an required shape even shade after throughly brushing the surface to remove all dirt, and remains of loose powered materials. Etc Complete.

Exposed brick cladding using exposed sand finished (traditional) cladding brick of approved make of size 225 x 65 x 30 mm ,includng to 10mm rough plaster in proposion 1:4(1 cement:4 sand) and fitting this tile used to adhesive chemical including cost of scaffolding, curing etc. complete in superstructure upto all level as per drawing and design approved by architect / engineer

supply, fabricating and installation in position and testing galvanized MS gate of width 6m and height of about 2.1m out of channel joints,angles,flates,plates,pipes including stiffers,bracing,fabricated hinks,MS arrangement etc.including charge to be transportation,loading,labur,welding etc.complete to be EIC/as per drawing.

Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 1meter placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embedded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete ( Approved Makes -Tata/SAIL/Jindal/Essar/Bhushan Steel/Arecelor Mittal). Railing height is 1 M. as per approved by architect. COMPLETE EIC

Repairing and finishing of sandwitch Kitchen platform (sandwitch of 18 mm thk Granite/Kotah stone of approved shade of sandwitch type of required Top pattern stone sandwitch of 18 mm thk Granite of approved shade of approved shade and sample on top and 25 mm thk kota in bottom with 30 mm thk screed of (1:2:4) in between)with sandwitch supports of 25 mm thk two kota on sides and screed in between and 75 mm raised platform with kota on top as per design and approved sample for all floors / all levels / all heights. The rate includes cutting for sink, rounding, champhering and mirror polishing of edges, facias of granite, including necessary bonding adhesive like Araldite or equivalent. (Only plan area shall be measured and paid for). The rate includes rounding, champhering and mirror polishing of edges. Rate shall be exclusive of SS sink, , Piller tap, Bib tap-couplin etc. complete. A) 18mm thick Granite Top Sandwich type plateform( Granite Shall be approved shade by Architect /Consultants ) (Finishing and repairing of granite platform with all material & labour cost as required as directed by engineer-in- charge.)

Providing and fixing notice board made out of 12mm thick soft board with good quality of fabric & wooden framing finish with melamine polish. Complete with all necessary hardwareNotice Board.' COMPLETE EIC

Providing and fixing 1.2 thick S.S. 304 2b grade sheet with nitric acid.Process etching plate and all text &graphics fill-up by standard enemel black colored. Fitted with flats SS etching plat should be mounted on wall / wooden surface by SS screws and/or by 3m double side gum-tape,and where applicable as per company's guideline,with prior approval by Architect or on-site-authorised person.Indoor signage: stainless steel etching signage size :300X75mm (used in all chambers/door)COMPLETE EIC

Providing and fixing 1.2 thick S.S. 304 2b grade sheet with nitric acid.Process etching plate and all text &graphics fill-up by standard enemel black colored. Fitted with flats SS etching plat should be mounted on wall / wooden surface by SS screws and/or by 3m double side gum-tape,and where applicable as per company's guideline,with prior approval by Architect or on-site-authorised person.Indoor signage: stainless steel etching signagesize: 250X150mm (used for Basic Signage)COMPLETE EIC

Providing and fixing 1.2 thick S.S. 304 2b grade sheet with nitric acid.Process etching plate and all text &graphics fill-up by standard enemel black colored. Fitted with flats SS etching plat should be mounted on wall / wooden surface by SS screws and/or by 3m double side gum-tape,and where applicable as per company's guideline,with prior approval by Architect or on-site-authorised person.Indoor signage: stainless steel etching signage size: 600X600mm (used for floor directory sign)COMPLETE EIC

Providing and fixing S.S.matt finished with back-lite by LEDs lighting on ACP fascia.Providing 3mm thick alluminium composite panel (ACP) sheet fascia and all side with required iron angle / hollow heavy pipe structure frame. and back side cover up by aliminium sheet ,complete box should be water-proof.size :10'0"X4'0"X0'5".Outdoor signage: stainless steel latters / logo signageCOMPLETE EIC

Providing and fixing SS powder coated dustbin size. 8"X2'Complete as directed by EIC or architect.

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) white plastic seal and cover.

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton)

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton)

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for 150mm diameter sewer.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 250mm (upto 10 ton)

Providing and planting BRUSH TREE including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan .including cost of soil filling and size of 5' to 6'

Providing and planting TABEBUIA ROSSIA including excavation 450 X 450 X 450 MM , back filling, pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 5' to 6'

Providing and planting KACHANAR including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan..including cost of soil filling and size of 5' to 6'

Maintaining of PINK CASIA including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan ..including cost of soil filling and size of 5' to 6' (Maintaining of plants for six months including manure etc. complete as required.)

Providing and planting PINK BI FLORA including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan .e.including cost of soil filling and size of 5' to 6'

Providing and planting KADAM including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling and size of 5' to 6'

Providing and planting FOX TEL PAM including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling and size of 8' to 10'

Maintaining of EXZORA RED including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2' (Maintaining of plants for six months including manure etc. complete as required.)

Maintaining of EXZORA PINK including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2' (Maintaining of plants for six months including manure etc. complete as required.)

Maintaining of AKELIFA including excavation 300 X 300 X 300 MM, back filling , pest control treatment,leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2' (Maintaining of plants for six months including manure etc. complete as required.)

Providing and planting TIKKOMA GAURICHORI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT

Providing and planting CHANDNI DRAFT including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT

Providing and planting CHANDNI BERICUT including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT

Maintaining of JET-ROPA DRAFT including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT (Maintaining of plants for six months including manure etc. complete as required.)

Providing and planting RAT RANI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT

Maintaing of HAMELIA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan . .including cost of soil filling 1' TO 2' FT (Maintaining of plants for six months including manure etc. complete as required.)

Providing and planting TIKKOMA CAPANSIA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan . .including cost of soil filling 1' TO 2' FT

Maintaining of TIKKOMA CAPANSIA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan . .including cost of soil filling 1' TO 2' FT (Maintaining of plants for six months including manure etc. complete as required.)

Providing and planting KARAN DRAFT PINK including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT

Providing and planting PARAS including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .excluding cost of soil filling 1' TO 2' FT

Providing and planting MADHUKAMINI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT

Providing and planting MOGARA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT

Providing and planting KADVA MEHDI including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' . FT

Providing and planting PHYSUC including excavation 300 X 300 X 150 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling.HEIGHT 1' . FT(GREEN COLOUR)

Maintaining of PHYSUC including excavation 300 X 300 X 150 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling.HEIGHT 1' . FT(GREEN COLOUR) (Maintaining of plants for six months including manure etc. complete as required.)

Providing & fixing straight slide F.R.P play system of size :19x 2 ft x 7 feet height..all structure will be of heavy duty M.S. pipes and plates etc. complete as per specification of EIC.(Make specified as per appendix-1)

Providing & fixing double see-saw Size 8ft x 8ftx3ft height.It consists of follwong 4 nos. F.R.P. seats and all structure will be of heavy duty. M.S. pipe and plates etc. complete as per specification of EIC.(Make specified as per appendix-1)

Providing & fixing double swing of size 8ft x 6ft x 8ft.It consists of following 2 nos. canvas belt and all structures will be heavy duty M.S. pipes and plates etc. complete as per specification of EIC.(Make specified as per appendix-1)

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling ,complete with 6A Modular type switches and following type of accessories erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

Providing following type of Modular Type Accessories mounted with pvc / metallic box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge.(3) Two Pin/RJ-11 Telephone Socket

(8) Modem Jack for Computer Open RJ-45

(9) 16 Amp. SP one way switch

(10) 6/16Amp. Universal socket

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of pairs. With necessary connections. [A] Conductor Size 0.5 mm (a) Unarmoured 2) Two Pairs

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [C] CAT - 6

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (N) Three phase 8 way SS Double door for horizontal single phase outgoing

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.

Half / One Module Blanking Plate of Standerd Size.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 , 3 core flexible wire with earthing. [Make shall be approved by Engineer in charge]

Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.

Supplying and erecting approved make oscillating type bracket fan A.C. 23OV. 50cy/s 400/450 mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, flexible Core plug top complete erected with lead wires as directed.

Supply and Installation of LED indoor Fixture with LEDs of wattage 0.2 watt and to 0.5 wattage assembly on single MCPCB, with housing used as a heat sink shall be made of thick sheet steel confirming to IS : 513 / CRCA polyester power coated and High U.V. & Corrosion resistance with diffuser and / or polycarbon optics with company mark . name 120 to 300 V, power factor more than 0.9 THD < 10% CCT 4000 K to 6500 K, uniformality ratio > 0.7, Luminier efficiency > 85 Lumen / watt , LED Draver Effinciency > 85%. 36Watt, Surge 4K, IP-20, 4 feet

LED panel light with provision for plane front frame with translucent cover fixed to housing complete. 18 to 20 watt

Street Light IP-65, Surge 4KV, Alluminium Die cast , 130 Lm / watt, 24 to 36 watt

Supplying & erecting IP 55 grade 150 x 90 x 75 cms section pillar fabricated from 14 Gauge thick joint less M.S. Sheet with angle iron legs 95 cms long made from 40 x 40x 6 mm thick. Jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work Uniform Until erected with cement concrete foundation and 45 cms high bricks work finishing with plaster etc. hinged double door with 4" x 6" vision panel covered with Mesh & V. panel overlapping with flap for meter reading internally supported on both side,

Supplying & erecting approved make time switch with single pole airbreak contacts suitable for 230 V.15/16A.complete with self starting motor driven clock ‘ON’ &’ OFF’ automatic arrangement at any predetermined time during each 24 hours,With nickel cadmium rechargeable battery backup erected as directed.

Providing and erecting, heavy duty flood light integral luminaire comprises die cast aluminium body with heat resistant toughened front glass, silicon rubber gasket,anodised reflector hot deep powder coated cradle clamp with suitable size of necessary built in control gear complete with lamp. (B) With one no. 150 watt HPSV / Metal halide lamp

Supplying Steel tubular pole (Swaged) confirming to IS - 2713 (Part-II) 1980. Manufacturing process of steel tubular pole should be as per IS specification. Basic steel tube should be ISI Marked. Pole should be painted by one coat of Zinc comet Primer and two coat of Aluminium /approved paint to be erected on / in existing Foundation. The length of poles are as below. (A) 7.5 mtr. Long Swaged Steel tubular pole (i) pole as per IS code 410-SP-4 with 300 X 300 X 4 mm base plate. (Approximate Pole weight 67 Kg) For burial erection

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

Supplying & erecting energy saving Energy Efficient E+ (1 - 4 ft) 28 watt retrofit tube fitting with one no 28watt T-5 tube complete with E.G.P. wings reflector / clear acrylic guard cover & tube and electronic inbuilt circuit ballast of rating 130 to 325 V A.C. The fittings should be able to fit in any conventional existing T - 8 tube fittings complete erected in an approved manner.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (H) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

(G) 3 1/2 core 185 Sq. mm ( 95 Sq. mm 1/2 core)

(F) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core)

(B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core)

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables.(e) 4 core 25 Sq. mm

(c) 4 core 10 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. (a) 3 core 2.5Sq. Mm

(a-1) 3 core 4 Sq. mm

(b) 3 core 6 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables.(D) 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(H) 3 & 1/2 core 240 Sq. mm

(F) 3 & 1/2 core 150 Sq. mm

(B) 3 & 1/2 core 35/50 Sq. mm

(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables.(e) 2 to 4 core 16 Sq. mm

(d) 2 to 4 core 10 Sq. mm

(c) 2 to 4 core 6 Sq. mm

(b) 2 to 4 core 4 Sq. mm

(a) 2 to 4 core 2.5 Sq. mm

Solderless crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (K) 240 Sq.mm.

(J) 185 Sq.mm.

(I) 150 Sq.mm.

(E) 35/50 Sq.mm.

(D) 25 Sq.mm.

(B) 10 Sq.mm

(C) 16 Sq.mm.

Solderless crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm

Making trench in Hard Murrum / Tar Road of suitable width of 90 cms or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cms.X 12 cms. Flushed with ground in cement foundation as directed by Engineer in charge.

Supplying following size of Light duty “A” Class G.I . Pipe & erecting as directed by Engineer-in-charge. (B) 50 mm dia

Providing & laying ISI marked Rigid PVC pipe having 6Kg / cm2 (Class-3) to be erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 mtr. (B) 50 mm Dia. (2.5Kg/6RMT)

Supplying & erecting recess wall mounting speaker with 5W rated input power 3.3 K. Ohms / 3W impedance, 100 - 10000 Hz frequency response with 6 inch dia. cone type 8 ohms speakers duly fitted in ABS plastic cabinet of colour match with wall or ceiling of following size. (b)Square shaped 260 x 260mm size speaker

Supplying & erecting Philips Ahuja make Booster Amplifier having power output of 25OW (RMS,), suitable to obtain combined power output of two, with 6 mike inputs & suitable to be used independently as a 250watt amplifier in combination with mike & mixer. The booster Amplifier shall be without mike &Aux. input channels, The system shall be suitable to operate on 24OV. A.C. & 24 Volts D.C. Battery........(A) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall be certified by that company whose switch gears are used after fabrication for beneficial use

(i) with 350mm depth

Providing and erecting metallic vitrified danger notice board for MEDIUM VOLTAGE installation to be erected as per IS.

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber gasket and necessary busbar supports with Aluminium busbar having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulation tape for phase sequence, three phase & neutral each Suitable for following current capacity with necessary painting mounted on wall or pedestal frame of required size with necessary connections.(C) Suitable for 300 Amp. Capacity

Approved make Three pole moulded case circuit breaker having breaking capacity/strength ICU of 50 K.A. at 415V. having normal current rating up to 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.

Approved make Three pole moulded case circuit breaker having breaking capacity ICU of 25 K.A. at 415 V having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity.(c)63 Amp.

Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 50 KA at 415 V having Normal current rating up to 400A. with variable Thermal & magnetic release suitable to work on A.C.supply 50 c/s. With all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. Secondary light point.(a) with medium class Rigid PVC pipe and accessories

Supply, Installation, Testing & Commissioning of 50 X 6 Earth strip for Electrical grid with required labour and accessories.

Supply, Installation, Testing & Commissioning of 25 X 3 Earth strip for Electrical grid with required labour and accessories.

Supply, Installation, Testing & Commissioning of 25 Sqmm Green Flexible wire with required labour and accessories.

Supply, Installation, Testing & Commissioning of 10 Sqmm Green Flexible wire with required labour and accessories.

Supply, Installation, Testing and Commissioning of 24 port patch panel with required connection of cat 6 wire as per instruction of architec.

R-Y-B INDICATING LAMP WITH FUSE

MULTI FUNCTION METER conserv make with kwkva kvar kwh p.f. V Aetc. parameters with RS 485 port

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Providing and fixing of stainless steel handle having size 450 mm deep including of cost of fixture,hardware etc. complete as per directed by Engg. Incharge.

Providing 1.15mt wide plinth protection clading excavation in hard or dence soil and Base Laying 0.15mt R.C.C1:4:8 (1 cement : 4 coarse sand : 8 hand broken stone aggregate 40mm nominal size) in foundation with common burnt Clay CM1;6 massonary as per directed with available Excavated(Excluding Rock) filling and providing cement concret 1:2:4 (1 cement : 2 coarse sand : 4 Graded stone aggregate 20mm nominal size) on top Laying including 20mm Plaster CM1:4 with Curing finishng at complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

Removing, refixing and repairing of Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). (Removing, re-fixing, repairing with new tiles of same shade including all materials and labour cost as directed engineer-in-charge.)

Grouting the Joints of Flooring tiles having joint of 3 to 5mm wide, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade( 0.10 to kg of hardener and 0.20 kg og resin per Kg) , including filling/ grouting and finishing compt as per diresction of Engineer-in- charge(A) size of Tile 600 x 600mm

Repairing of Joints of existing Flooring tiles having joint of 3 to 5mm wide, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade( 0.10 to kg of hardener and 0.20 kg og resin per Kg) , including filling/ grouting and finishing compt as per diresction of Engineer-in- charge(A) size of Tile 600 x 600mm (Filling and Finishing of tiles groove including all materials & labour cost as required as directed by engineer-in-charge)

Providing and laying River Wash Polished Granite stone Riser, Steeps & Top of Building Paraffit in required designand patterns, in linear as well as curvilinear portions of the building all Levelcomplete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, Moulding, Gru Cutting withcuring and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and fixing Pressmatic Angle cock with Wall Flange C.P of approved quality Jaquar (AQTCHR3057P)

Providing and fixing chromium plated brass Presmatic with Auto Colsing System Pillar cock of approved quality.Jaquar (PRS031)

Providing and fixing chromium plated brass Presmatic with Auto Colsing System Urinal Push cock of approved quality.Jaquar (PRS077)

Providing and fixing chromium plated brass 15mm Concealed Par Kit with Push Type Stop cock of approved quality including fixing in pipe line etc. complete (Jaquar -ALD083 and ARI39083K)

Construction of B.B. Masonary Kundi of clear inside dimension size 1.2M x 1.2M x 0.75M with 23cm thick B.B. masonary wall in C:M 1:6 including required excavation, C.C. 1:4:8 15cms. Thick refilling 12mm thick cement plaster to masonary and floor C.C. layer and fixing the cast R.C.C. manhole cover of size 0.60M x 0.45M With frame and white/ colour wash etc. complete with Supplying, filling, spreading & leveling coarse sand of size range 1.5mm to 2 mm in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of Engineer -incharge

Reparing of existing expansion joint after scraping in expansion joint pouring polysulphide sealent in a joint and applying expansion joint belt with epoxy paste etc. complete including cost of primer, sealing, compound grade-A in expansion joints as per direction of engineer- in - charge. (Repairing and finishing of expansion joint including Groove covering with outer sheet/plate including all materials & Labour cost as required as directed by engineer-in-charge.)

Providing, supplying, staking and spreading crushed stone aggregate for hard quality 10mm,20mm, and 40mm size mixed in required proportion as directed including compaction, carriage and labour cost ectc. Complete as directed.

Mirror Polishing on marble work/Granite work/ Kota stone work where ever required to give high gloss finish complete.as the direction of Engineer-

Providing and fixing anodized aluminium work for WINDOWS AND VENTILATORS with Anodized aluminium ( anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 ) heavy duty extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasts including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt or sealent of wecker 789 or Dow corning 789 grade so as to make all joints waterproof etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing / panelling, stainless steel screws as per architectural drawings and the directions of Engineer-in- charge.....

Removing, repairing and re-fixing of anodized aluminium work for three track/two track WINDOWS AND VENTILATORS of Anodized aluminium ( anodized transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 ) heavy duty extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasts including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt or sealent of wecker 789 or Dow corning 789 grade so as to make all joints waterproof etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, auminium snap beading for glazing / panelling, stainless steel screws as per architectural drawings and the directions of Engineer-in- charge Including providing and fixing glazing in aluminium WINDOW AND VENTILATOR shutters etc. with EDPM gasket etc. .....

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer with With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work twoi coat all complete. 9.48.1 Fixed to steel windows by welding

Providing and fixing White Vitreous China Oval Counter Basin Size 560x470 mm with all fittings and fixtures complete, (Cera-S2030104).

Providing and fixing Pressmatic Auto Closing System Bib cock with Wall Flange C.P of approved quality with all fittings and fixtures complete, Jaquar (PRS043)

Providing and fixing chromium plated brass 25mm Concealed Push Type Flush cock of approved quality including fixing in pipe line etc. complete (Jaquar -FLV1095NG) ( MetroPole)

Providing material & labour for fixing Urinal of approved quality including connection with trap and with integral longitudinal flush pipe.(A) Rectangular plate pattern white earthenware 325mm x 310mm x 420mm. Cera, Make.Carys

Providing material & labour for fixing Kitchen & Laboratory sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but Including fixture fittings. (C) Vitreous China Sink.(i) 600mm x 400mm x 200mm size CATER Make.

R P Kakadia

RAJGURU CONSTRUCTION