HERITAGE ELECTRICAL WORKS

Amount

Rewiring with 2x1.5sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavygauge MS conduit pipe Open on wall and ceiling with MS accessories Open on wall with Surface PVC Box and Cover with Modular CoverPlate with 6A Modular Switch with painting of suitable colour continous earthwire connection of 14SWG TC Wire for open MS conduit light/fan point. (For electronic regulator) (Roma Plus) (DATA-1)

Rewiring with 2x1.5Sqmm (22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade in suitable PVC rigid pipe Open on wall and ceiling with PVC accessories on wall with Modular PVC Surface Box and Cover with Modular CoverPlate with 6A Modular Switch in flush PVC surface box open on wall with suitable painting of colour for PVC light point/fan point. (For electronic regulator) (5Pts/ coil) (Roma Plus/Equ) (DATA-2)

Rewiring with 2x1.5Sqmm (22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade in suitable PVC rigid pipe open on wall and ceiling with PVC accessories on wall with Modular PVC surface Box and Cover with Modular CoverPlate with 6A Modular Switch in flush with PVC surface box open on wall with suitable painting of colour for PVC light point/fan point. (6Pts/ coil) (Roma Plus/Equ) (DATA-3)

Rewiring with 3x1.5sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavygauge MS conduit pipe open on wall and ceiling with MS accessories open on wall with Surface PVC box and 6A Modular switch (twoway) with Modular Front cover Plates with painting of suitable colour for continous earthwire connection of 14SWG TC Wire for open Staircase light point. (Roma Plus/Equ) (DATA-4)

Rewiring with 2x1.5Sqmm (22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade in suitable heavygauge MS conduit on wall and ceiling with MS accessories open on wall with Surface PVC Box and Cover with Modular CoverPlate with 16A Indicator Switch and 16A Roma Socket with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour for open MS conduit point. (Geyser Point) (Roma Plus/ Equ) (DATA-5)

Renewal by Supply and Fixing of Philips make 38 W Green Space LED surface mounted Fitting on Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells/Equ) (DATA-6)

Renewal by Supply and Fixing of 1 x 18W / 22W 4 Feet LED Fitting with 20W LED Tube Light on Wall or Ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Philips/Havells) (DATA-7)

Renewal by Supply and Fixing of Philips make 2 x 22W 4 Feet LED Fitting with 2 X 20W LED Tube Light with TW Round block with Ball and socket with check nuts on Ceiling with suitable 3mtr conduit pipe Suspension with PVC unsheathed copper leads from terminals to the Fittings. (Philips/ Havells) (DATA-8)

Renewal by Supply and Fixing of 2 x 22W 4 Feet LED Fitting with 2 X 20W LED Tube Light with TW Round block with Ball and socket with check nuts on Ceiling with suitable 1.5mtr conduit pipe Suspension with PVC unsheathed copper leads from terminals to the Fittings. (Philips/ Havells) (DATA-9)

Renewal by Supply and Fixing of 2 x 22W 4 Feet LED Fitting with 2 X 20W LED Tube Light with TW Round block on wall with PVC unsheathed copper leads from terminals to the Fittings. (Philips/ Havells) (DATA-10)

Renewal by Supply and Fixing of 2x2 42W LED Square Fitting on Gyp Board or Armstring Grid False Ceiling with suitable aluminium frame with PVC unsheathed copper leads from terminals to the Fittings. (Havells/Phillips) (DATA-11)

Renewal bySupply and fixing of WT Bulk Head Fitting with guard suitable for 9w LED Lamp on wall with Suitable necessary connection. (Philips/Havells) (DATA-12)

Renewal by Supply and Fixing of 2' 10W LED Light on Wall or Ceiling with PVC unsheathed copper leads from terminals to the Fittings.(Havells/Equ) (DATA-13)

Renewal by Supply and fixing of 1200mm(48") Sweep High Speed AC Ceiling Fan with 2M Regulator with 3Mtr down rod on ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Crompton) (DATA – 14)

Renewal by Supply and fixing of 1200mm(48") Sweep High Speed AC Ceiling Fan with 2M Regulator with 1.5 Mtr down rod on ceiling with PVC unsheathed copper leads from terminals to the Fittings. (Crompton) (DATA – 15)

Dismantling and removing and refixing of existing ceiling fan with all accessories. (DATA 15A)

Renewal by supply and fixing of Fan Cross Clamp for the ceiling fan with Material charges for heavy gauge Cross arm with Necessary 4" bolts and Nuts and fixing the Fan Clamp with necessary alignment. (DATA-16)

Renewal by Supply and fixing of 300mm (12") sweep (lightduty) AC exhaust fan complete without provision of hole in the wall with necessary suitable connection. (SD 115)

Renewal by Supply and fixing of 450mm (18") sweep (Heavy duty) AC exhaust fan complete without provision of hole in the wall with necessary suitable connection. (DATA 17)

Renewal by Supply & Fixing of Ding Dong call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable Modular PVC Surface box with 6A Modular push switch. (Havells/Equ) (DATA-18)

Renewal by Supply and Fixing of 2No. 6A modular switch, 2 No. 6A 2M universal modular socket in suitable 6 module PVC Surface box covered with 6 module cover plate on wall with suitable necessary connection. (DATA -19)

Renewal by Supply and Fixing of 1No. 6A modular switch, 1No. 6A 2M universal modular socket, 1No. 16A Modular switch and 1No. 6A/16A Modular Socket on suitable 6 module Surface PVC box covered with 6 module cover plate on wall with suitable necessary connection. (DATA - 20)

Renewal by Supply and Fixing of 1No. 16A Modular switch and 1No. 6A/16A 2M Modular Socket on suitable 3 module Surface PVC box covered with 3 module cover plate on wall with suitable necessary connection. (DATA -21)

Renewal by Supply and Fixing of 1No. 6A Modular switch and 1No. 6A 2M Universal Modular Socket on suitable 3 module Surface PVC box covered with 3 module cover plate on wall with suitable necessary connection. (DATA -22)

Supply and Fixing of 20A DP plug and socket in sheet encloser, with 32A DP MCB inflush with wall with earth connection (for AC plug) (SD-140)

Renewal by supply and fixing of 63A FP Enclosure with suitable FP Sheet steel Enclosure on wall with suitable necessary connection. (DATA 24)

Renewal by supply and fixing of 32A FP Enclosure with suitable FP Sheet steel Enclosure on wall with suitable necessary connection. (DATA 25)

Renewal by Supply and run of 2 of 2.5 sq.mm. (36 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable heavygauge MS conduit pipe on wall with 14TC SWG and ceiling with painting of suitable colour. (DATA 26)

Renewal by Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire onnection of 14 SWG TC wire with painting of suitable colour. (SD 44)

Renewal by Supply and run of 2 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD-58)

Renewal by Supply and run of 4 of 10 sq.mm. (140/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (DATA 27)

Renewal by Supply and run of 4 of 16 sq.mm. (101/ 0.45) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe on wall ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (DATA 28)

Renewal by Supply and fixing of 12 way single pole and neutral MCB DB IP 42 Protection Metal Door Cover distribution board with 1No 32A DPMCB as incoming and 10 Nos 6Amps to 32Amps SPMCB outgoing on wall with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/Legrand make) (DATA-29)

Renewal by Supply and fixing of 8 way single pole and neutral MCB DB IP 42 Protection Metal Door Cover distribution board with 1No 32A DPMCB as incoming and 6 Nos 6Amps to 32Amps SPMCB outgoing on wall with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/Legrand make) (DATA-30)

Renewal by Supply and fixing of Three phase Seven Segment type 4 way 63A distribution board with Metal Door cover Code IP42 Protection , with 63A 4 pole MCB as incoming and Sub incomers 3 Nos 25A 30mA DP ELCB and 12 Nos 6A-32A SP MCB as Outgoing on wall with cable entry boxes with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/legrand) (DATA–31)

Renewal by Supply and fixing of Three phase Seven Segment type 6 way 63A distribution board with Metal Door cover Code IP42 Protection, with 63A 4 pole MCB as incoming and Sub incomers 3 Nos 40A DP 30mA ELCB and 18 Nos 6A-32A SP MCB as Outgoing on wall with cable entry boxes with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/legrand) (DATA–32)

Renewal by Supply and Fixing of 8way 100A Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43 with 1 No 100A 4 pole MCCB with Enclosure box as incoming and 3 Nos 63A TP MCB and 9 Nos 6-32A SP MCB as outgoing on wall with cable entry boxes and earth connection only. The MCCB DB and MCB's should be with ISI mark. (Hager/Equ) (DATA 33)

Renewal by Supply and fixing of 400A capacity dust and proof cubical panel board of size 6’ ft x 5’ ft x 2’ ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively and with supply and fixing of the following cubical mounting switches with centre bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in I.S specifications. Incoming: 1)400A 4pole MCCB -1No Outgoing: 1)125A TPN MCCB - 3 Nos 2)250A TPN MCCB - 4Nos

Renewal by Supply and fixing of 250A capacity dust and proof cubical panel board of size 5’ ft x 6’ ft x 2’ ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively and with supply and fixing of the following cubical mounting switches with centre bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in I.S specifications. Incomer: 1)250A 4pole MCCB -1No Outgoing: 1)125A TPN MCCB - 4 Nos 2)63A TPN MCCB - 4Nos

Renewal by Supply and clamping of 3 ½ x 70 sq.mm PVC LT UG cable on wall with M.S. special clamps. (SD-225)

Renewal by Supply and clamping of 3 ½ x 50 sq.mm PVC LT UG cable on wall with M.S. special clamps. (SD-224)

Renewal by Supply and fixing of brass cable gland for 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with earth connection. (SD-189)

Renewal by Supply and fixing of brass cable gland for 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with earth connection. (SD-188)

Renewal by Supply and providing cable end termination of 3-1/2 x 70 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-238)

Renewal by Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD-237)

Renewal by Supply and laying of 2 Runs of 31/2 X 185 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with 120/103mm Dura Duct Hose and sand and refilling the earth to make good. (DATA 35)

Renewal by Supply and clamping of 2 Runs x3 ½ x 185 sq.mm PVC LT UG cable on wall with M.S. special clamps. (SD-229 Rs.1248 x2=2496)

Renewal by Supply and laying of 31/2 X 185 sq.mm PVC LTUG aluminium armoured cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with 120/103mm Dura Duct Hose and sand and refilling the earth to make good. (DATA 36)

Renewal by Supply and clamping of 3 ½ x 185 sq.mm PVC LT UG cable on wall with M.S. special clamps. (SD-229)

Renewal by Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC LTUG aluminium armoured cable with earth connection. (SD 193)

Renewal by Supply and providing cable end termination of 3-1/2 x 185 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD 242)

Renewal by Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 233)

Renewal by Supply and run of No 8 copper in PVC for earth connection. (DATA-37)

Renewal by Supply and run of 25mm x 3mm tinned GI flat with necessary clamps / supports on wall / floor / ground for earth connection. (Quotation)

Renewal by Supply, Installation,Testing and commissioning of make 7.5 KVA UPS system 3 phase input and Single phase output and as per the detaied specification enclosed, Sealed Maintenance free batteries to suppory 7.5 KVA for 2Hrs complete with intercell connectors & copper cables, battery stand made out of powder coated MS Angles with adeguate support to carry the load of the batteries. The vendor shall submit dimensional GA drawing of complete UPS/ Inverter system battery rack with batteries, Service panel and battery bank calculation. (DATA 38)

Renewal by GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height ngle support for running the Cable from Panel to Panel boards. (SOR Rate)

Supply, Erection, Testing, Commissioning and Handing over of 1 No 250 KVA Diesel Generator set of 0.8P.f, Three Phase, 415/420Volts, 50c/s, 1500RPM as detailed below 1.ENGINE: Water cooled Diesel engine suitable for generator application with a shaft Output of 600 BHP at 1500 RPM under NTP Condition as per BSS 5514/IS 10000. The engine shall comprise the following standard scope of supply: (Make Kirloskar/ Cummins) 1. Dry type Air cleaner 2. Expansion bellow 3. Radiator, Radiator fan and mounting 4. Air to air charge cooler 5. Exhaust Gas turbo charger 6. Lube oil cooler and Lube oil filter 7. Fuel filter(pre and micro) 8. In-line Mono-block fuel injection pump with governor and fuel feed pump 9. Electronic governor 10. 24V Battery charging alternator 11. 24V Volt electric starter motor 12. Engine test Certificate 13. Residential Mufler 14. Fly wheel with starter ring.

ENGINE INSTRUMENTPANEL MOUNTED. Engine control panel consisting of ON/OFF/START Key Lube oil pressure guage , oil temperature gauge, high water temperature guage and electronic hour meter and RPM indicator. SAFETY SYSTEM OF ENGINE :-The Engine shall trip for the following conditions with visual alarm device 1. Low lubricating oil pressure 2. High Water temperature 3. Vee-belt failure and over speed 4. The visual indicator should be provide for Low battery indication. The engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load. 2. ALTERNATOR : Alternator capacity of 250 KVA/ 200 KW,AC 3 phase, 50HZ, 415/420V, 0.8P.F.4 wire self excited, self regulated designed to run at 1500 RPM under NTP conditions confirming to BS 5000/ IS 13364 (part-II) 1992 to be coupled directly to the Diesel engine and test certificate (Make: Kirloskar/ Crompton/ Greaves/ Equivlent.) 3.ACOUSTIC ENCLOSURE:- Acoustic enclosure shall be powder coated and fabricated of 16 SWG CRCA MS sheet.The silent canopy shall be of nut bolt type construction. Critical processes of punching are done on CNC Machine to maintain dimensional accuracy of hole

within 0.1mm Powder coating done after seven – tank surface preparation process of sheet metal. Canopy panel and doors shall have inside lining of FIRE RETARDANT 64 Kg/m density mineral wool of 100mm thickness as Acoustic material. Four hinged doors shall be provided to canopy. The average sound level at 1 Mt distance shall be less than 75 DBA average or as per CPCB norms. Surface treatment – Painting: The enclosure surface shall be suitably treated for degreasing de-rusting and posphating. The canopies are passed through seven – tank treatment thoroughly. Additional features of canopies: Canopy fabricated on CNC machines with dimensional accuracy of 0.1 mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if

any World class Cooling package: Canopies shall have cooling package for which it can also perform at 45 degree C/ambient temperature.No grouting required on the ground, only a level surface capable of with standing the DG weight.Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. 1150.00 30250.00 The Gen set frame shall also be provided with hooks for unloading Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade.

4. FUEL TANK : 450 liters. Removable fuel tank shall be fabricated out of 14 SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connection and mechanical fuel gauge. Fuel tank can be easily removed for clearing or any maintenance. 5. BASE FRAME : The base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall be have provision for mounting of acoustic enclosure on it. The supply of generator set includes loading. Unloading and transportation charges. 6. Battery: 2 Nos 12V 180AHR Battery (Cummins/Kirloskar) (SOR RATE)

AMF Panel: Supply, Erection, Testing, Commissioning and Handing over of 1 No 125 KVA Diesel Generator AMF CONTROL PANEL Consisting of The AMF control panel 800A(Cubical) should be fabricated with vermin proof and dust proof, best quality sheet steel and floor mounted with removable rear panels and hinged front doors with enamel paint and incorporating the following with suitable provision of Supply and fixing of 1 No 200A 4Pole MCCB for connecting incoming and outgoing leads having been made on the AMF control panel

Construction of a RCC concrete foundation of size for 250 KVA generator Bed Sixe 340(L) x 2740(B) x 2095(H)mm (approx weight 4100 KG) with cement concrete 1:2:4 with sand cushion all around the foundation for the erection of 250 KVA Generator set with proper alignment with necessary ramp arrangements. (Quotation Enclosed)

Dismantling and refixing of existing 16meters High mast structure with all accessories. (Quotation Enclosed)

Shifting of existing 16meters High mast structure by design and casting of suitable foundation with 1:2: 4 mix RCC concrete with 30cm projection above the ground level with 1 metre width x 1 metre length and 2 meter depth with necessary galvanized foundation bolt nuts and washers ad dump plate enclosing the bolts for the high mast considering the safe soil bearing capacity at site. (Quotation Enclosed)

Renewal by Supply and providing of Plate Earth electrode with 3mts of Class ' B ' GI pipe 40 mm and 3mm thick of copper plate of size 24" x 24" x 3 mm riveted to the pipe at one end and providing a funnel at the top end with 2runs of 25mm x 3mm copper flat from the copper plate to the top of the electrode and embedding the above electrode in a pit to be excavated at a depth of 3mt and of size 60cm x 60cm and filling up the pit with charcoal, salt, sand. (SOR rate P.No.136)

Renewal by Supply and Installation of copper air terminal spike arrestor with base and all fittings and stand. (Quotation Enclosed)

Renewal by Supply and installation of 70 sqmm copper cable run on the external wall from terrace to the ground floor in PVC 1” conduit. (DATA 39)

Renewal by Supply and fixing of 65 mm (21/2") GI pipe (Class 'B')of 6 mt. Length with 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of masonary pedestal with suitable angle iron frame work and Supply and fixing of 2 Nos 150W LED Focus light fitting ( Havells/Philips/Equ Make ) with Special type MS Base Adjustable tilt angle for fixing the LED fitting complete set with SMC sintex box 4way heavy duty connector,3 core 1.5 sqmm copper wire from terminal to fittings 6A SPMCB (Legrand/Equ make) with 32mm dia GI pipe (B Class) with necessary clamps, on the above post with PVC unsheathed leads with painting of suitable colour. (DATA-40)

Renewal by Supply and laying of 4 x 16 Sqmm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 meter putting 0.15mt layer of sand and covering the cable completely with Dura Duct Hose 50/38 mm sand and refilling the earth to make good. (DATA-41)

Renewal by Supply and clarnping of 4 x16 sq.mm PVC LTUG armoured LTUG cable on post or on wall MS Clamps. (SD-221)

Renewal by Supply and fixing of brass cable gland for 4x16 sqmm PVC armoured LTUG cable with earth connection. (DATA-42)

Renewal by Supply and providing cable end termination of 4x16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete. (DATA-43)

Dismantling and Shifting and Re-connecting of existing 3 Nos Cubicle type panel boards in the main adminstration to various places. (Quotation Enclosed)

Supply and fixing of Fancy Decorative Type Chantlier fitting on ceiling with suitable scafollding work arrangements with necessary connections. (Jaquar/Equ) (DATA-44)

Supply, Installation, testing and commissioning of 8 CHANNEL XVR SYSTEM, H.264 compression, with 5MP support, 1HDMI port, 1 VGA port.1no.RS485,3 USB ports, supports upto 4 SATA HDD(8TB MAX each) support ONVIF 100 M RJ 45 x1; Resolution 5MP @ 12FPS make. MX/Hik Vision/ Equ)

Supply, Installation, testing and commissioning of 16 CHANNEL XVR SYSTEM, H.264 compression, with 5MP support, 1HDMI port, 1 VGA port.1no.RS485,3 USB ports, supports upto 4 SATA HDD(8TB MAX each) support ONVIF 100 M RJ 45 x1; Resolution 5MP @ 12FPS make. MX/Hik Vision/ Equ)

Supply, Installation, testing and commissioning of 4 TERABYTE HARD DISK DRIVE (4000GB)

Supply, Installation, testing and commissioning of Hik Vision Bullet Camera 5.0MP IR 30Mtrs, HD CMOS, resolution 5Mp support MAX 25fps; Output Display CVI/ CVBS/AHD,IR 30Mtrs to 50Mtr support IP67, Metal; support ONVIF,12v+-30% DC

Supply, Installation, testing and commissioning of 65" LED TELEVISION High Definition. Make Micromax, LG,Philips, Samsung, Equvt

Supply, Installation, testing and commissioning of power supply units for the cameras 12Vx18AMPS

Supply, Installation, testing and commissioning of HDMI Cable 3.0Mtrs Length

Supply, Installation, testing and commissioning of HDMI Cable 15.0Mtrs Length

Supply, Installation, testing and commissioning of CAT6 CABLE in PVC Conduit 3/4" dia Heavy class with fittings and clamping.

Supply, Installation, testing and commissioning of HDMI(or) VGA Cable Converter by CAT6 to XVR

Supply, Installation, testing and commissioning of HD BNC Video Balun to camera with DC pin power connect CAT

Supply, Installation, testing and commissioning of MS Rack for mounting XVR and Switches etc.,

Supply, installation, testing, Commissioning of LED Sign Board displayin ENGLISH Language for KING INSTITUTE OF PREVENTIVE MEDICINE AND RESEARCH INSTITUTE, GUINDY, CHENNAI-32. Size:30'x3.5' made using 96 Sqft 3mm thick aico panel sheet (Blue) (Outdoor) box type cladding using 1.6mm 2"x1" mild steel box pipe. LED backlit Acrlic Letters (White) with GI base channel letters for 150Sq. 1150numbers of 3 SMD 5630 High Power White LED Modules used for backlighting the acrylic letters. The LED is powered using 5 numbers of 12V 250W LED Outdoor Drivers. The outdoor Drivers are placed in 2 numbers of DB box. The LED Sign board in English Language mounted on mild steel structure made of necessary angles/pipes on entrance near gate. CHANNEL LETTER: Box type fitting made up of 2mm thick Acyrlic sheet(Mitsubishi). The front end is covered with semi transparent acrylic fitting with back portion is made up of 26gauge GI sheet. Letter size: 22" top line and 12" bottom line colour: White Acrylic

letters are cut using Laser technology and beading has been fixed using acrylic heating process. LED modules: SMD white modules (Samsung/Eq) Colour: White Operating Life: approximately 80000hrs (at 12 to 14hrs contionous ON Condition per day) Warranty: One year warranty on the LED Modules & driver. Acrlic lettersare cut usingLaser technology and beading has been fixed using acrylic heatingprocess. (Quotation Encl)

Renewal by Supply ,Erection,Testing and commissioning of 2.0TR split type Air conditioner with one outdoor air cooled condensing unit and indoor evaporator with inter connection of copper refrigerant piping between condensing unit and evaporator unit electrical cabling of performing cooling ,dehumidifying air circulating filtering etc.. suitable for operation on 230V 50Hz single phase. (Carrier/Blue Star/Equ) (SOR 2022-23)

Renewal by Supply ,Erection,Testing and commissioning of 1.5TR split type Air conditioner with one outdoor air cooled condensing unit and indoor evaporator with inter connection of copper refrigerant piping between condensing unit and evaporator unit electrical cabling of performing cooling ,dehumidifying air circulating filtering etc.. suitable for operation on 230V 50Hz single phase. (Carrier/Blue Star/Equ) (SOR 2022-23)

Renewal by Supply and fixing of 5KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation at 230 Volt, 50 Hz, AC power supply (Make: V –Guard) (SOR 2022-23)

Renewal by Supply and fixing of 4KVA wall mounting type Automatic voltage stabilizer with time delay arrangements suitable for operation at 230 Volt, 50 Hz, AC power supply (Make: V –Guard) (SOR 2022-23)

Renewal by Supply and Installation of Extra copper pipe with necessary insulation, Cabling arrangement etc…(SOR 2022-23)

Renewal by Supply and fixing of angle iron stand for outdoor Unit. (SOR 2022-23)

Renewal by Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required. (SOR 2022-23)

Towards charges for Core Cutting for 2 feet walls, wall opening & closing ,Scaffolding and minor civil works etc..(Quotation Enclosed)(Per One Core cutting Rs.1500/-) 25Nos of Core Cutting as per the site requirement.

Towards charges for shifting of the existing 2 Nos split type AC units with complete Connection etc..(Quotation Enclosed)

Supply, installation, testing, Commissioning of LED Sign Board display in TAMIL Language for கிங் நோய் தடுப்பு மருந்து மற்றும் ஆராய்ச்சி நிலையம், கிண்டி, சென்னை-32. Size:30'x3.5' made using 96 Sqft 3mm thick aico panel sheet (Blue) (Outdoor) box type cladding using 1.6mm 2"x1" mild steel box pipe. LED back lit Acrlic Letters (White) with GI base channel letters for 150Sq.

1150numbers of 3 SMD 5630 High Power White LED Modules used for backlighting the acrylic letters. The LED is powered using 5 numbers of 12V 250W LED Outdoor Drivers. The outdoor Drivers are placed in 2 numbers of DB box. The LED Sign board in English Language mounted on mild steel structure made of necessary angles/pipes on entrance near gate. CHANNEL LETTER: Box type fitting made up of 2mm thick Acyrlic sheet(Mitsubishi). The front end is covered with semi transparent acrylic fitting with back portion is made up of 26gauge GI sheet. Letter size: 22" top line and 12" bottom line colour: White Acrylic letters are cut using Laser technology and beading has been fixed using acrylic heating process. LED modules: SMD white modules (Samsung/Eq) Colour: White Operating Life: approximately 80000hrs (at 12 to 14hrs contionous ON Condition per day) Warranty: One year warranty on the LED Modules & driver. Acrlic lettersare cut using Laser technology and beading has been fixed using acrylic heating process. (Quotation Encl)

U.S. ELECTRICALS

P MANICKAM AND CO