SPL REPAIR TO ELECTRIC REPAIR AND ASSY SECTION IN GE GP OF 509 ABW UNDER GE (EAST) AGRA

Amount

Dismantling asbestos cement (corrugated, semicorrugated sheet / North light curve, Ridge etc) sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminium zince coating GI based plain steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Plain, galvanised, mild steel sheeting, 1.25 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with self tapping screws as specified complete all as specified and directed.

Dismantling of wrought iron of mild steel work of any description not otherwise provided etc complete all as specified and directed.

S&F in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, wind tie, channel or flat sections) including distance pieces, welding, cutting, cleats etc Fe 410-W (Gde E-250) quality A complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint ovar a coat of red oxide zinc chrome primer complete all as specified and directed.

Dismantling wall and ceiling board or insulation board / slabs / blanket any thickness including cover fillets etc complete all as specified and directed.

S&F in repair 605 x 605 mm snap grid of powder coated galvanized iron of angle of size 23 mm x 23 mm of 30 gauge (Perimeter), T section of size 23 mm x 35 mm main and 23 mm x 27 mm (intermediate) of 30 gauge suitable for false ceiling including GI wire 2 mm thick @ 1200 mm centre to centre both ways for hanging arrangement complete all as specified and directed.

M&L for 4 mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600 mm fixed to GI snap grid frame work complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) not exc. 1.5 Sqm each complete all as specified and directed.

All as per item No.12 above but exc. 1.5 Sqm and not exc. 4.00 sqm each complete all as specified and directed.

S&F anodized aluminium door & frame 0.55 Kg /m incl 5.00 mm thick tinted glass in half portion and in other half portion 12 mm thick prelaminated particles board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination complete and fixed with anodzied aluminium snap beading, glazing clips, joining clip, screws and 02 Nos of aluminium handle on each door shutter, aluminium anodized tower bolt 200 mm long 02 Nos on each shutter and martice lock device complete with double keys for each lock, 01 No floor spring for each shutter compplete all as specified and directed with following specifications :- (a) Aluminium door / frame = 101.50 x 44.45 mm (b) Aluminium style / top & middle rails of shutter = 83.5 x 44.45 mm (c) Aluminium bottom rail of shutter = 114.50 x 44.45 mm (d) Aluminium door frame with shutters shall be fixed in position in brick wall opening as required according to site conditions including all fastening arrangements & making good of existing surface with obd / white wash over plaster after fixing door etc complete all as specified and directed.

Providing & fixing of windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick 'D' quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 micron thick and back coated with 5-7 microns thick alkyd backer. section for outer frame should be of 72 x 55 mm, centre mullion should be of 72 x 50 mm section for fixed galas beading should be of 12 x 12 mm and section for shutter should be of 52 x 25 mm. Outer frame & mullion section to have rebate for glazed shutters , fly mesh and 20 mm provision for guard bars / grills fly mesh shutter section should be of 20 x 40 mm. The section are to be cut to length mitre joined with corner briack centre mullions to be fixed with mullion cap, Elixit or equivalent stay, handle 2 nos of heavy duty stain less steel pivot hinges shall be provided per shutter. the windows should be panelled with 4 mm thick plain float glass and SS mesh for fly mesh shutter (304 grade). Ruber Gaskets are provided all around the glass. The above frame should be fixed to the concrete / measonry wall by means of self expending screws including 10 mm square guard bars with 6" (152.4 mm) Pitch including making good of existing surface with obd / white wash over plaster aftex fixing window etc complete for finished item of work including of all taxes etc complete all as specified and directed.

Providing and fixing of ventilator made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick "D" quality galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 48 x 50 mm, centre mullion should be 48 x 50mm, section for shutter should be of 52 x 25 mm and rebate for glazed shutter with a 20mm provision for guard bars / grill. The section are to be cut to length metre joined with corner bracket. Centre mullion is to be fixed with mullion cap. Handle, stay, 2 Nos of stainless steel heavy duty pivot hinges shall be provided per shutter the windows fitted with 4 mm thick plan float glass with rubber gaskets including fixing the frames in concrete / masonry wall by means of self expanding screws, including fixed panel beading section should be of 12 x 12 mm. Outer frame and mullions to have 10 mm Square guard bars with 6" (152.4 mm) pitch etc complete for finished item of work. complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden or metal frames, glazed with putt or fixed with beads etc complete all as specified and directed.

S&F Rough cast wired figured glass 6.4 mm thick and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair aluminium anodized partition of specified aluminium section as per required size & wt of section cannot be less than 0.55 Kg / RM including aluminium bead, rubber gasket and 5 mm thick plain glass in upper portion and 8 mm thick ACP sheet of any colour etc complete all as specified and directed.

S&F in repair steel rolling shutters 1.25 mm thickness with ball bearing as specified including top cover, anchoring rod, hasp and staple, rail and gear operated type with bevel gear box and crank handle to make it futty functionable etc complete all as specified and directed.

Taking down rolling shutters and re-fixing to its orginal position after cleaning all parts, straightening rails changing damaged strips, bottom rail guide rail, helical spring as required, greasing, oiling, painting, welding servicing for smooth functioning of all partns completed all as directed for the following sizes :- Note : Lath strip, bottom rail, spring, gear, guide rail etc will be measured and paitn separetly as supply only.

(A) Area of rolling shutter n.exc. 10 Sqm each

(B) Area of rolling shutter exc. 10 Sqm and n. exc. 25 Sqm each

Supply only mild steel spring made out of 6 mm to 11 mm dia high tension steel wire confirming to IS 4454 having 65 to 100 helical for rolling shutter for smooth working condition complete all as specified and directed. (dia of spring 100 mm to 150 mm)

Replacement of existing unserviceable gear box with new gear box made out 1 mm thick mild steel sheet including painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Supply only 65 to 75 mm wide guide MS rail, 3 mm thick suitable for rolling shutter complete all as specified and directed.

Supply only 75 mm wide mild steel laths strips 1 mm thick for rolling shutter including mild steel clip at either ends duly painted with and including two coats of synthetic enamel paint (shades to match with the existing) over a shop coat of red oxide primer complete all as specified and directed.

Supply only mild steel bottom rail lock plate with two handles 150 mm wide and 3 mm thick including necessary locking arrangement on both sides and painting to bottom rail with and including two caots of synthetic enamel paint to match with existing over a shop coat of red oxide primer complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls / ceiling etc including racking out joints, hacking for kay scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick plastering in CM 1:6 on brick concrete surfaces of wall & finishing the surface even & smooth complete all as specified and directed.

M&L for 15 mm thick plastering in CM 1:4 on brick concrete surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

M&L for two caots of oil bound distemper over a coat of average 2 mm thick putty on new plastered surfaces including preparation complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash complete all as specified and directed.

M&L for applying two or more caots of 100% premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Akali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinited) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm on over 2 mm thick putty new surfaces complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoions arches pillar etc complete all as specified and directed.

M&L for brick work with sub class 'B' brick old size straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds, moss and efforescenet salts and applying two coats of oil bond distemper over 2 mm thick putty complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices, plaster etc by brooming down by steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots etc and apply two coat of white wash complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paitn having VOC less than 50 gm / litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm ver and including priming coat of exterior primer applied @ 0.90 litre /10 sqm on old surfaces including preparation of surface etc complete all as specified and directed.

M&L for preparation of old surfaces of any description over 10 cm girth or width, not otherwise described and applying a coat of synthetic enamel paint etc complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floor / dados, etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick incl and over cement screed bed 20 mm thick in 1:6 cement and sand mortar, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for kota stone slab 20 to 25 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster 1:4 cement and sand mortar complete all as specified and directed.

M&L for vitrified ceramic tiles, light shade 10 mm thick (square / rectangular) polished, area of each tiles exc. 0.42 sqm but not exc. 1 sqm in floors etc white cement and coloured pigment to match the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Ditto all as per item No.42 above but in skirting over 10 mm thick rendering in CM 1:4 etc complete all as specified and directed.

Demolition of cement concrete of any description and any position etc complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) etc complete all as specified and directed.

M&L for metallic floor hardener in PCC (1:2:4) etc complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stone bed plates, kerb chajjas, water troughts, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, fixing to chain link fencing etc all as directed including necessary form work etc complete all as specified and directed.

M&L for cutting grooves in brick wall, 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 etc complete all as specified and directed.

S&F in repair PVC (SWR) pipe single socketed 200 mm bore, incluiding bend, shose, Tee, Y as required etc in any length with rubber ring joints fixed to walls / pillar with MS clamp complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection / path / sub base / paving surface / hard standing etc finished even and smooth and exposed edges fair or rounding or chamfering laid in panels with and including all necessary form work and filling the joints with mastic bitumen filling or one part of hot bitumen 85/25 grade and three part of fine sand (all by weight) complete all as specified and directed.

M&L for 3 mm thick high density anti-static epoxy based heavy duty industrial flooring and topped with 1 mm thick of self leveling compound to achieve total thickenss of 4 mm including surface preparation, also make good to undulation including cleaning and filling of existing dummy / expanious / contraction joint if any and primer application and including earthing of charge dissipation with self adhesive copper tape @ 600 x 600 mm grid to the earthing points copper tape must be of 100 micron thickness and electric resistance for 0.003 ohm or as recommended by the manufacturer based on manufacturer design to get desired resistance and guarranty. complete all as specified and directed. Note :- (i) The work will be executed under supension of manufacturer or by authorized agency of manufacturer. (ii) Guarranty against item No.51 & 52 above for min 5 year to be provided by contractor. (iii) An amount of 5% of work done against item No.51 & 52 above shall be retained from contractor by GE against guarranty of Anti Static Flooring works.

M&L for 8 to 10 mm thick size 600 mm x 600 mm anti static dissipative type tile including surface preparation with suitable chemical / adhesive & also make good to undulation surface and joints should be filled with epoxy including earthing of charge dissipation with slef advesive copper tape / wire @ 600 x 600 mm grid to the earthing points including soldering at junction etc complete all as specified and directed.

Demoltion of reinforcement concrete of any description and in any position etc complete all as specified and directed.

M&L providing precast cement concrete type B-1 1:2:4 (20 mm graded aggregate) (nominal mix) for cover slab for manhole, drain and similar articals with plane face complete all as specified and directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

M&L for 1.00 mm thick mild steel black sheet as in steel gate and similar works cut to size, holes punched including round headed screw welded etc including two coat of synthetic enamel paint (ordinary tint) over a coat of red oxide primer including preparation of new or previously untreated surfaces of steel complete all as specified and directed.

Taking down copper / aluminum point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, fan regulators, sockets, lamp holder, bell push, call bell, LEB bulb, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLSH PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit medium grade not less than 20 mm dia with all accessories and FRLSH PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, GI sunken boxes 60 mm deep & 1.6 mm thick duly painted with aluminium inside and anticorrosive paint out side, including 3 mm thick plastic laminated sheet for mounting switches, socket, fan regulators etc connecting earth and making good to the disturbed surface of wall / floor and matching with existing specifications, connection of cable with MCB's or bus bar shall be done through proper size copper / brass thimbles. Note :- Conduit shall be fixed on surface of roof with necessary saddles where concealing of conduit is not feasible at no extra cost for the following (a) One light /fan point controlled by one switch.

(b) One 5 pin socket outlet 5 Amps on same board

(c) One bell/buzzer point controlled by one push button on the same board with other switches or independent

All as per item No.58 above but one 3 pin socket outlet, 5 Amps on independent board with cables 2.5 sqmm copper conductor complete all as specified and directed.

All as per item No.58 above but with 4 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FSLSH PVC 4 Sqmm multi stranded insulated unsheathed copper wire for continues earth on independent board complete all as specified and directed.

Supply and fix switch piano flush button single pole one way 5 amp 240 volts with polycarbonate body complete all as specified and directed.

Supply and fixing bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix switch piano flush button single pole one way 15 amp 230 volts with polycarbonate body complete all as specified and directed.

Supply and fix socket 5 amp 5 pin flush type, 240 volt with polycarbonate body complete all as specified and directed.

Supply and fix socket out let, 6 pin 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.

Supply and fix ceiling rose, PVC / polycarbonate, insulated body surface bakelite 65 mm dia three terminals complete all as specified and directed.

Supply and fix call bell, ding dong type, 230 volt AC single pole complete all as specified and directed.

Supply and fixing LED luminaire 595 mm x 595 mm, 40 watt, 220 V AC, 6500 K recessed type with igh efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to eletric source with & using PVC sheathed and insulated three core copper conductor cables of size 0.75 sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed.

Supplying and fixing LED battan Tube light 20 watt surface / wall mounted with specially designed powder coated aluminum housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption < 20W, luminaire lumens > 2000 lm, system efficiency of > 120 lumens / W, with LED binning as per AMSI Bin C 78.377A, photo biological safety report as per IEC 624718 & electrical insulation class I, ingress protection IP 20, colour rendering index CRI > 80, temp range 0 to 450C, driver efficency > 85%, power factor > 0.9, THD <20% as per IEC 61000-3-2, colour temp 6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150 - 270V AC and seafty extra low voltage safe level < V DC as per IEC standard with LM 70 & LM 80 certification complete all as specified and directed. Make :- specification as equivalent to model LBNL20-C-AL of Orient

Supply & fixing LED building security light fitting 35 watt 230 V AC out door type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, fixed to pole or wall of building and including suitable bracket made out of 25 mm dia GI light grade pipe, 1.00 m long bent to shape by cutting & welding as required & directed and fixed with tow Nos of FI clamp 35 x 6 mm to tightened with suitable size of botls, nut and washer and including painted with two coat of aluminium paint over a coat of red oxide primer and including connecting the fitting to eletric source with & including twin twisted copper flexible wire of size 0.75 sqmm three core with suitable size flexible PVC conduit including all accessories and fixing arrangement for fixing the light fitting and writing the date of fixing on security light with permt marker complete all as specified & directed.

Supply and fix exhaust fan, steel body AC single phase 230 V, heavy duty (copper winding) of size 450 m sweep, 1400 RPM with, blades and frame and louvers incliding cutting of round hole of suitable size as per size of exhaust fan and make in good to the disturbed surface MS bolts, grouted to wall and connecting up including provision in cable from connector to fan with flexible cable 24/0.2 mm with copper conductor and necessary fitting arrangement complete all as specified and directed.

Dismantling taking down existing ceiling fan and re-fixing & connecting up including provision of cable from ceiling r ose or connector to fan complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug top with one SP MCB 20 Amp 240 volt incl cutting / Chasing of wall and making in good to the disturbed surface complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB three pole with three pin plug top with one TP MCB 63 Amp 415 volt including cutting / chasing of wall and make in good to the disturbed surface complete all as specified and directe

Supply & fix of sheet metal enclosure vertical TPN DB 4 way double door, suitable for flush mounting and surface mounting, with 250 A copper busbar for each phase with 2 Neutral bar, 2 Earth boar and cable ties for cable management, fully insulated busbar & shrouded neutral bars, improved pan assembly for ease of installation, prefitted masking sheet, reversible door for IP 54 DB with provision for 250 Amp MCCB as incomer and SP / TP MCB as outgoing including cutting / chasing of wall and make in good to the disturbed surface complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board, TPN 415 volt 6 way with IP-43 protection double door complete with appropriate size bus bar and neutral link fixed flush in wall including chases wall for fixing DB and taking down and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board, single pole & neutral 240 volts 12 way with IP-54 protection double door complete with appropriate size bus bar and neutral link incl cutting / chasing of wall and make in good to the disturbed surface complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board, single pole & neutral 240 volts 8 way with IP-54 protection double door complete with appropriate size bus bar and neutral link incl cutting / chasing of wall and make in good to the disturbed surface complete all as specified and directed.

Supply & fix sheet metal enclosure MCB distribution board, single pole & neutral 240 volts 4 way with IP-54 protection double door complete with appropriate size bus bar and neutral link incl cutting / chasing of wall and make in good to the disturbed surface complete all as specified and directed.

Supply and fixing MCCB 4 pole, 250 Amps, 50 Hz, Icu=35KA at 415 volt with thermal magnetic alongwith adjustable magnetic protection for current setting Icu=Ics=100% with adjustable over load setting (minium 70% to 100%) value from 10 to 15 times of related capacity standard complete all as specified and directed.

Supply and fixing MCB SP-5 to 32 Amp rating 240V, 10 KA 'C' urve and curretn carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB SPN 40 to 63 Amp rating 240 V, 10 KA 'C' curve and current carrying capacity in the MCB DB complete with connection testing and commissioning Complete all as specified and directed.

Supply and fixing MCB TP 63 Amp, 415 V 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing MCB TPN 100 Amps, 415V 10KA 'C' curve and current carrying capacity in the DB complete with connection testing and commissioning. complete all as specified and directed.

S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 2.5 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 2.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC conduit heavy grade not less 20 mm dia including dismantling of old unsv submain wiring complete all as specified and directed by Engr in charge including taking down existing un serviceable sub main wiring complete Note :- (i) The work should be executed at the top of appx 25 m height of building. (ii) Two run of single core PVC cable with one run of earth conductor and conducit / batten shall be measured as one unit.

S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 2 x 4 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1 x4 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC conduit medium grade not less 20 mm dia including dismantling of old unsv submain wiring complete all as specified and directed by Engr in charge including taking down existing un serviceable sub main wiring complete Note :- Two run of single core PVC cable with one run of earth conductor and conducit / batten shall be measured as one unit.

S&F sub main wiring with three single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 6 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 6 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC conduit medium grade not less 32 mm dia including dismantling of old unsv submain wiring complete all as specified and directed by Engr in charge including taking down existing un serviceable sub main wiring complete Note :- Two run of single core PVC cable with one run of earth conductor and conducit / batten shall be measured as one unit.

S&F sub main wiring with four single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 10 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 10 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC conduit medium grade not less 32 mm dia including dismantling of old unsv submain wiring complete all as specified and directed by Engr in charge including taking down existing un serviceable sub main wiring complete Note :- Four run of single core PVC cable with two run of earth conductor and conducit / batten shall be measured as one unit.

S&F sub main wiring with four single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 16 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 16 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC conduit medium grade not less 32 mm dia including dismantling of old unsv submain wiring complete all as specified and directed by Engr in charge including taking down existing un serviceable sub main wiring complete Note :- Four run of single core PVC cable with two run of earth conductor and conducit / batten shall be measured as one unit.

Supply & Fix Air circulator fans 230 volts single phase oscillating 600 mm sweep, min 1440 RPM suitable for wall mounting complete all as specified and directed.

S&F wall mounting fan, electric driven single phase 230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades with three leafed and 3 core copper cable of suitable size complete all as specified and directed.

Supply, fixing, connecting & Testing BLDC ceiling fans operated with remote control complete with blades, down rods 5 mtr long or as per site requirement, remote control and accessiries, 230 V, 1200 mm sweep, in air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDE) and including connecting wire with new 3 core 0.50 Sqm PVC insulated and sheathed copper conductor cable from ceiling rose and also wiriting MES No with black paint complete all as specified and directed.

M&L as in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and complete all as specified and directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed.

M/s J S & SONS (BID ID -3329233)

m/s meetu enterprises (BID ID -3339258)

CREATIVE CONSTRUCTION (BID ID -3330189)

M/S DEVENDRA KUMAR GUPTA (BID ID -3331033)

Gupta Automobiles (BID ID -3330882)

Lachman Das Govind Ram (BID ID -3330629)

R.C. Magla and Co. (BID ID -3330521)

garg construction company (BID ID -3330905)

M/s SCHOLASTIC ENTERPRISES (BID ID -3339207)