Construction of composite water supply scheme for Gram Panchayat Kuneran, Left out area of Gram Panchayat Bhaderkali, Fatehpur, Jawal, Mawa Kohlan, Gondpur Banehra Upper and Lower in Gagret Constituency in Tehsil Ghanari/Amb in Distt. Una (HP)

Amount

C/O Pump House, Boundary wall around the pump house including internal wiring :- Excavation in foundation trenches etc. up to all depths in earth work in all kinds of soil such as spade work, pick work, jumper work, blasting work in soft and hard rock chieselling / wedging out rock where blasting is prohibited and in saturated soil etc. in all leads and lifts, stacking the excavated soil with in all leads clear from the edge of excavation and then returning the stacked soil in fifteen centimeters layers, when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts complete in all respect to the entire satisfaction as per the directions of Engineer-in-Charge.

Providing and laying cement concrete 1:6:12 ( 1 cement : 6 sand : 12 graded stone aggregate 40 mm nominal size ) and curing complete excluding the cost of form work in foundation and plinth within in all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge. .

1st. class brick work using common burnt clay building bricks in foundation and plinth in cement mortor 1:6 (1 cement : 6 sand) within all lead and lifts complete in all respect to the entire satisfaction and as per the directions of the Engineer-in-Charge.

1st. class brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:6 (1 cement : 6 sand) within all lead and lifts complete in all respect to the entire satisfaction and as per the directions of the Engineer-in-Charge.

Half brick work using common burnt clay building bricks in super structure above plinth level upto floor two level in cement mortor 1:4 ( 1 cement:4 sand ) 2nd. Class brick work within all leads and lifts and complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb i/c. steel butt hinges 2.5 mm thick with guards, lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface within all lead and lifts complete in all respect to the entire satisfaction as directed by Engineer-in-Charge Profile "A"

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means, adjustable lugs with split and tails to each jamb i/c. steel butt hinges 2.5 mm thick with guards, lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface within all lead and lifts complete in all respect to the entire satisfaction as directed by Engineer-in-Charge Profile "B"

Providing and fixing pannelled glazed or panalled and glazed shutters for doors, windows and clerestory windows including black enemelled iron butt hinges with necessary screws 40 mm thick 2nd. class deodar wood within all lead and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge.

Providing and laying cement concrete work 1:1.5:3 (1 Cement: 1.5 Sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- Suspended Floor, roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level within all leads and lifts complete in all respect to the entire satisfaction as per the directions of Engineer-in-Charge .

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in :-

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto 200 mm thickness within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor within all lead and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Excavation in earth work and filling in 15 cm. layers in foundation & plinths including ramming, watering and consolidating complete in all respect including carriage of materials within all leads and lifts and as per the direction of the Engineer-in-Charge.

40 mm thick. cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size ) laid in one layer finished with floting coat of neat cement in all leads and lifts and as per the direction of the Engineer-in-Charge

15 mm thick cement plaster in single coat on rough side of brick/stone / concrete wall for interior plastering upto floor two level including arrises, internal rounded angles, chamfers and or rounded angles not exceeding 80 mm in girth and finished even and smooth with cement mortor 1:6 ( 1 cement :6 sand ) in all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge..

Pointing on brick work with cement mortor 1:4 ( 1 cement: : 4 sand ) within all leads and lifts complete in all respect to the entire satisfactions as per the direction of the Engineer - in- Charge. Cut or weather struck.

Providing plinth protection 50 mm thick in cement concrete 1:3:6 ( 1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size ) within all lead and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge .

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by throughly cleaning oil, greas,dirt,and other foreign metter with ready mixed paint brushing wood primer pink complete in all respect as per the direction of the Engineer-in-Charge.

Painting two coats excluding priming coat on new wood and wood surfaces with enamel paint to give an even shade including cleaning the surface of dirt ,dust and other foreign matter sand papering and stoping complete in all respect as per the direction of the Engineer - in - Charge.

White washing with lime on undecorated wall surfaces (two coats) to give an even shade including throughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter complete within all lead and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge .

Hirmachi colour wash on undecorated wall surfaces (Three coats) to give an even shade including thoroughly brooming the surfaces to remove all dirt,dust, mortar drops and other foreign matter complete in in all respect as per the direction of the Engineer-in-Charge.

Providing and fixing MS grills of required pattern in wooden frame / pressed steel frame with MS flats square / rounds bars 12 mm dia with round headed bolts and nuts of by screws within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge Plain grills.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Providing 40x3mm flat iron hold fast 40 cms long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15 cms 1:3:6 ( 1 cement :3 sand : 6 graded stone aggregate 20 mm nominal size ) complete in all respect within all lead and lifts to the entire satisfaction and as per the direction of the Engineer - in- Charge .

Providing and fixing anodized aluminium sliding door bolts anodized colour and shade with bolts and nuts screws etc. complete within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge 250x16mm

Providing and fixing aluminium tower bolts ((Barrel type) with necessary screws etc. within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge . 250x10mm.

Providing and fixing aluminium tower bolts ((Barrel type) with necessary screws etc. within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge . 150x10mm.

Providing and fixing aluminium handles anodized transparent or dyed to required shade and colour with necessary screws etc. within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge . 100 mm

Providing and fixing M.S. fan clamp type -1 of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C slab during laying including painting the exposed portion of loop, all as per standard design complete in all respect within all lead and lifts complete to the entire satisfaction and as per the direction of the Engineer - in- Charge .

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt ,dust,oil other foreign matters & sand and remains of loose powdered materials complete within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer - in- Charge .

Steel work welded in built up sections, trusses and framed work, including cutting , hoisting ,fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling, brackets and similar works within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge..

Painting two coats (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt,dust and other foreign matter within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Wiring for light/Fan point /Exhaust fan point/call bell point with 1.5 .mm Sq. PVC insulated copper conductor cable in surface /recessed PVC conduit as required including carriage of materials within all leads and lifts. Group "C"

Wiring for light/power plug with 2 x 4 Sq.mm PVC insulated copper conductor or single core cable in surface/recessed steel conduit alongwith 1 No.2.24 mm dia bar copper wire for loop earthing as required including carriage of materials within all leads and lifts.

Wiring for circuit wiring with 2 x 2.5 Sq.mm PVC insulated copper conductor single core cable in surface/recessed steel conduit as required including carriage of materials within all leads and lifts.

Wiring for sub-main wiring with the following size of PVC insulated copper conductor single core cable in surface/recessed steel conduit as required including carriage of materials within all leads and lifts.2x 6mm

Supplying and fixing metal box of 180 x 100 x 60 mm deep (Nominal size) on surface/ recess with suitable size phenolic leminated sheet cover fixing 3 pin 5/6 amps socket tumber/piano type switch connective painting etc. as required (for power plug) including carriage of materials within all leads and lifts.

Supplying and fixing backellite batten/angle holder including connection as required including carriage of materials within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer -in- Charge.

Providing, installing, testing and commissioning of ceiling fan and regulator including wiring the rod of standard length (upto 30cm) with 1.5 Sqmm PVC insulated copper conductor single core cabe etc. as required sweep type. Cat. A (1200 mm sweep) including carriage of material complete in all respect to the entire satisfaction as per the direction of the Engineer -in- Charge.

Providing, installation, testing and commissioning of prewired flouroscent tube fitting complete with ballast, starter and capactors but excluding flouroscent tube rod, suitable to operate on 230 volts single phase A.C.supply directly on surface with copper wiring as required including carriage of materials within all leads and lifts tube fixture 1 x 36 watt box type category "A"

Supplying and fixing 40 Amps to 63 Amps rating 240 Volts "L" series miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required including carriage of materials within all leads and lifts.

Supplying and fixing of following way single pole and neutral sheet steel MCB distribution board 240 volts on surface/recessed complete with tinned copper bar neutral link earth din bar detachable gland plate interconnection including painting earthing as required including carriage of materials within all leads and lifts.

Supplying and fixing 32 Amps rating 240 volts, L series miniature circuit breaker of following pole in the connections testing and connections etc. including carriage of materials existing MCB DB complete within all leads and lifts. Category "A", single pole.

Earthing with G.I. pipe earth, pipe 4.5 mtrs length, 40mm dia including accessories and providing masonry enclousres with cover plate having locking arrangement and watering pipe etc.( but without charcal coke and salt) complete as required including carriage of materials within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer -in- Charge.

Extra using salt and charcoal for pipe earth electrode as required, including carriage of materials within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer -in- Charge.

Supplying and laying 6 SWG G.I.wire at 0.50 mtr. below ground level for conductor earth electrode, including soldering etc. as required including carriage of materials within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer -in- Charge.

Providing, fixing and testing street light fixture with CFL of 36 watt copper ballast. G.I. Pipe bracket complete in all respect

C/O RCC Collection tank of 38000 ltrs. capacity at Node No.1 for WSS Bhaderkali & Brahampur & C/O RCC Main Storage tank of 30000 ltrs. capacity at Node No.127 for WSS WSS Fatehpur Behma.

Excavation in foundation trenches etc. up to all depths in earth work in all kinds of soil such as spade work, pick work, jumper work, blasting work in soft and hard rock chieselling / wedging out rock where blasting is prohibited and in saturated soil etc. in all leads and lifts, stacking the excavated soil with in all leads clear from the edge of excavation and then returning the stacked soil in fifteen centimeters layers, when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts complete in all respect to the entire satisfaction as per the directions of Engineer-in-Charge.

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand : 6 crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Providing and laying cement concrete work DESIGN MIX M25 not linear than 1:1.5:3 (1 cement: 1.5 : sand :3 crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-

Foundations, footings bases of columns and the like and mass concrete within all leads and lifts complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Walls (any thickness but not less than 0.10 mtrs. thickness) including attached pilasters, buttersses, plinth and string courses etc. from top of foundation level upto floor two level.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like within all leads and lifts complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Providing form work of ordinary timber plankings so as to give a rough finish including centring, shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceililng not exceeding 4 metres and removal of the same for insitu reinforced concrete and plain concrete work in Arches upto 6 metres span complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Providing in RCC work smooth finishing of the exposed surface with cement mortar 1:3 (1 cement : 3 sand) complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Providing and laying cement concrete work 1:1.5:3 (1 Cement: 1.5 Sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-

Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Arches upto floor two level.

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level within all leads and lifts complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting ,fixing in position and applying a priming coat of red lead paint In gratings, framed guard bars, ladders, railling, brackets and similar works within all leads and lifts complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge. .

Fixing inlet, outlet, over flow and scour pipe of GMS pipe of following internal dia (medium grade) including extra carriage within all leads and lifts and as per directions of the Engineer-in-charge.

Inlet Rising Main 100 mm dia.

Over flow & Scour pipe 100 mm dia.

Providing and fixing C.I. Sluice valve (With hand wheel) as per IS -780-1984 class-I upto 300 mm dia (including brass spindle and as per IS; 2906-1984 class -II dia >300 mm) complete with nuts, rubber insertion etc. complete ( The tail piece if required shall be measured and paid fior seperately ) PN 1.0

Over flow pipe 100 mm dia

Scour pipe 100 mm dia.

Providing and fixing Cast iron Manhole cover with frame having frames size of 500 mm dia with frame (Medium grade duty) weight of cover and frame to be not less than 116 Kg.

C/O. RCC Over Head Storage Tank 22500 ltrs. Cap. with 10 Mtrs. staging height at Node No. 49 , RCC OHSR Tank 132000 ltrs. Cap. with 20 Mtrs. staging height at Node No. 49, RCC OHSR Tank 53000 ltrs. Cap. with 20 Mtrs. staging height at Node No. 50 , RCC OHSR Tank 19000 ltrs. Cap. with 10 Mtrs. staging height at Node No. 115 for WSS GONDPUR BANEHRA UPPER & LOWER , RCC OHSR Tank 34500 ltrs. capacity with 15 Mtrs. staging height at Node No. 27 & RCC OHSR Tank 124000 ltrs. Cap. with 20 Mtrs. staging height at Node No. 2 for WSS BHADERKALI & BRAHAMPUR)

Excavation in foundation trenches etc. up to all depths in earth work in all kinds of soil such as spade work, pick work, jumper work, blasting work in soft and hard rock chieselling / wedging out rock where blasting is prohibited and in saturated soil etc. in all leads and lifts, stacking the excavated soil with in all leads clear from the edge of excavation and then returning the stacked soil in fifteen centimeters layers, when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts complete in all respect to the entire satisfaction as per the directions of Engineer-in-Charge.

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand : 6 crushed stone aggregate 40mm nominal size) and curing complete excluding the cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Providing and laying cement concrete work DESIGN MIX M25 not linear than 1:1.5:3 (1 cement: 1.5 sand :3 crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-

Foundations, footings bases of columns and the like and mass concrete within all leads and lifts complete in all respect to the entire satisfaction and as per the directions of Engineer-in-Charge.

Columns, pillars posts and struts upto all heights.

Lintels, beams, girders, bressumers and cantilevers upto all heights.

Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto all heights.

Arches upto floor two level.

Suspended Floor, roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever upto floor two level within all leads and lifts complete in all respect to the entire satisfaction as per the directions of Engineer-in-Charge .

Walls (any thickness but not less than 0.10 mtrs. thickness) including attached pilasters, buttersses, plinth and string courses etc. from top of foundation level.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in all leads and lifts complete in all respect to the entire satisfaction as per the directions of Engineer in -Charge :-

Foundation, footings and basis of columns etc. and mass concrete within all lead and lifts complete in all respect to the entire satisfaction as per the directions of the Engineer-in-Charge..

Columns, pillars, posts and struts Circular or curved in plan upto all heights.

Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floors.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto 200 mm thickness within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Stair cases with sloping or stepped soffits excluding landing upto all heights..

Providing form work of ordinary timber plankings so as to give a rough finish including centring, shuttering, strutting and propping etc. height of propping and centring below supporting floor to ceililng not exceeding 4 metres and removal of the same for insitu reinforced concrete and plain concrete work in Arches upto 6 metres span complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting ,fixing in position and applying a priming coat of red lead paint In gratings, framed guard bars, ladders, railling, brackets and similar works within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete in all respect including carriage of materials within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand : 6 graded stone aggregated 20mm nominal size) including carriage of materials complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge..

Providing and fixing MS manhole cover of 500 mm dia with frame (Medium grade duty) weight of cover and frame to be not less than 116 Kg.

Fixing inlet, outlet, over flow and scour pipe of GMS flanged pipe of following internal dia (medium grade) including extra carriage within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge..

Inlet Rising Main 100 mm dia.(MG)

Outlet pipe 100 mm dia (Distribution) (MG)

Over flow & Scour pipe 100 mm dia.(MG)

Providing, fixing and welding of MS flanges confirming to BIS code 6392-1971 table -5 below noted diameter (Latest with upto date ammendments) Welding of M.S. flanges on G.I. Pipe on both ends according to relevant BIS standard and detailed technical specifications) and provided with nuts and bolts of required size complete. within all leads and lifts complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge..

Inlet Rising Main 100 mm dia.

Outlet pipe 100 mm dia (Distribution)

Over flow & Scour pipe 100 mm dia.

Providing and fixing C.I. Sluice valve (With hand wheel) as per IS -780-1984 class-I upto 300 mm dia (including brass spindle and as per IS; 2906-1984 class -II dia >300 mm) complete with M.S. flanges ,bolts nuts, rubber insertion etc. complete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge.. PN 1.0

Outlet pipe 100 mm dia (Distribution)

Scour pipe 100 mm dia.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt,dust and remains of loose powdered material in all leads and liftscomplete in all respect to the entire satisfaction and as per the direction of the Engineer-in-Charge..

Provision for structural design and drawing and bearing capacity of soil using as per IS : 1231-1981 with latest ammendments shall be got approved from competent authority.

Sushant Puri

Pawan Kumar Sharma Govt Contractor

Thakur Constructions

sanjeev govt cont

Sarabjit Singh Katoch