GE(S)BTD-60 of 2026-27 SPECIAL REPAIR WORKS UNDER AGE BR-II AND AGE EM-IV OF GE(S) BATHINDA AT BATHINDA MIL STN

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing lining board, etc complete all as specified and as directed.

M & L for virified ceramic tile light shade 7-8mm thick double charged/ultra charged (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00sqm, in floor etc,. Set and jointed in neet cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor, hearth of wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

M & L for providing screed bed or bedding layer of CM 1:6 of 15mm thick for laying floor finishes complete all as specified and as direcetd.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.

M & L for 10mm thick rendering with ready Mix Mortar on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specied and directed.

M& L for 15mm thick rendering with ready Mix Mortar on other than fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement complete all as specied and directed.

Preparation of New/Old external wall surface complete all as specified complete all as specified and applying the following:- (a) M&L wall care putty a coat of 1.5mm thick layer on wall surface and smoothening the surface with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified. (b) two coat of acylic emulsion distemper over a coat of chalk whitening priming by using Airless spray/Roller complete all as specied and directed. Note:- Contractor may use manual scraping tools for complete removal and surface preparation with prior approval or Engr-in-charge in case of using of Mechanical equipment are not possible.

M&L for preparation of surfaces by mechanized sander having suction vacuum bag using smart periodical methodology complete all as specified. Providing and applying of paris putty of 1.5mm thickness over plastered surface to prepare the surface even and smooth and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note : Before applying painting (OBD & Exterior emulsion) in in bldgs a sample patch of size 1 mtr x 1 mtr to be done for approval of GE. Painting should be done by using painting roller, mechanically method and as per manufacturer's instructions. Cost for the same for scaffolding for plastering & painting etc is included in the rates quoted by the contractor.

M & L for preparation of old surfaces on ceilings and applying one coat of white wash complete all as specified and as directed.