GE S U 57 2021 22 PROVN OF BATHROOM AND TOILET WITH ALLIED INFRA NEAR BLDG NO 101 AT 11 SIKH PROVN OF RATION STORE AND CLOTHING STORE AT 3 ASD 15 FAD ADDN ALTN TO BLDG NO P 208 JCOS MESS AND PROVN OF WOODEN WALL PANELLING FOR ZORAWAR ROOM A

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard /dense soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and as directed.

PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6complete all as specified and as directed.

Brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Returning, filling incl spreading leveling watering and well ramming in layers not exceeding 25 mm in any type of soil complete all as specified and as directed.

Removing excavated material (soils) exceeding 250 m but n.exc. 500 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20 mm graded crushed stone aggregates) design mix as in foundations, including rafts, footings, foundation, beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix columns, pillars, piers, posts and struts complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Reinforced cement concrete M-25 (using 20mm graded crushed stone aggregates) design mix as in chajjas complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter for rough flat finished surfaces of concrete complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough flat finished surface of concrete complete all as specified and as directed.

Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams complete all as specified and as directed.

Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and as directed.

Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and as directed.

Formwork to chullah hoods, chajjas,troughs and similar items including edges for rough flat finished surface of concrete complete all as specified and as directed.

TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

All as per srl item No. 19 above but 5mm dia and over including 10mm dia in stirrups, spaces and binders etc complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

15 mm thick rendering in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured & paid separtely).

Supply only Liquid water proofing compound complete all as specified and as directed.

Rendering 05 mm thick in CM 1:4 on fair surfaces of ceiling work and finished even and smooth without using extra cement complete all as specified and as directed.

10 mm thick rendering as backing coat to receive the tiles on fair faces of brick /concrete surfaces in cement mortar 1:3 and finished even and rough complete all as specified and as directed.

Preparation of new plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces on ceiling and applying three coats of white wash complete all as specified and as directed.

Preparation of new plastered surfaces on walls and applying two coats of cement based paint over a coat of alkali primer complete all as specified and as directed.

Preparation of new plastered surface and applying two coats of apex ultima paint over a coat of primer including preparation of surfaces complete all as specified and as directed. (colour of Apex ultima approved by Engr-in-Charge/GE.

Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed.

75 mm thick cement concrete (1:4:8) type D-2 as sub base to floor complete all as specified and as directed.

25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregates as in floor and finished even and fair complete all as specified and as directed.

10mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

Non-skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Glazed ceramic tiles in vertical surface 300mm x 450mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and as directed.

75 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n exc 2 sqm each) area with 6mm wide joints and 10mm wide joints between the walls and plinth protection, finished even and smooth without using extra cement, outward slope of not less than 1:12, the joints shall be filled with mastic filling comprising one coat of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Mild steel ventilators (Box type) factory made with top hung shutters and bottom fixed type shutters incl pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded incl one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg CEUZ/TD/1269/2008 Sh 1/3 (ii) Glazing, wire gauge shall be measured and paid separately.

Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 quality A incl one shop coat of zinc chromate primer paint incl preparation of surfaces at contractor's workshop before fabrication complete all as specified and as directed.

4 mm thick glass sheet of ordinary quality n exc 0.5 Sqm in each pane complete all as specified and as directed.

Two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening complete all as specified and as directed.

Factory made solid panel PVC Moulded door shutter 28 to 30mm thick stiles with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face and 2mm thick plain coloure PVC sheet on back face complete all as specification and drawing complete all as specified and as directed.

Aluminum handles cast type, anodised, 150 mm size complete all as specified and as directed.

Aluminum handles cast type, anodised, 100 mm size complete all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and as directed.

Mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and as directed.

10 mm thick rendering in CM 1:3 on roof sufaces, finished even and smooth without using extra cement complete all as specified and as directed. Note :- Supply only water proofing compound shall be measured and paid seperately under the respective item.

Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3mm thick polymeric water proofing membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of semi hot blown bitumen 85/25 grade bitumen @ 0.70 Kg/Sqm and provide aluminium paint as per manufacturing instruction complete all as specified and as directed. Note:- Water proofing treatment will be done by IWL or through a specialized agancy.

Steel water tubing of nominal bore dia 15 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

Steel water tubing of nominal bore dia 20 mm medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed.

20mm dia, Ball brass, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

20mm dia Gun-metal, globe or gate valves, with rion wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

1000 ltrs capacity rotational moulded polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed in SSR Part I.

Vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cast iron P trap, bore of pipe 100 mm. and provision of concrete bedding complete all as specified and as directed.

10 litres Vitreous China valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

Supply only Flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern complete all as specified and as directed.

PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Angle valve, cast copper alloy fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

Stop valve (concealed type), cast copper alloy fancy type, chromium plated with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

15 mm dia Bib tap fancy type chomium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Vitreous China wash basin (Pedestal), white, flat back, size 550 mm x 400 mm excluding tap, chain, plug and porcelain stopper but including brackets and cutting for and pinning in ends of brackets complete all as specified and as directed.

Pillar taps 15mm bore fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' and cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

Brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

100mm dia cast iron sanitary connection pipe upto 300mm length complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 100mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and as directed.

Cast iron soil, waste and vent pipes (sand cast) 75mm bore in any length with or without ears with cement joints fixed to wall complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 100mm bore fitted with oval access door complete all as specified and as directed.

Cast iron bend (any radius) diminishing pieces or tapers 75mm bore fitted with oval access door complete all as specified and as directed.

75 mm bore Cast iron cowls complete all as specified and as directed.

Cast iron floor trap 75 mm, with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 complete all as specified and as directed.

Stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore complete all as specified and as directed.

Shower roses 15 mm chromium plated with or without swivel joints, any size, including 125 mm long arm and fixing to steel pipe or union, complete all as specified and as directed.

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and as directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floor, complete all as specified and as directed.

Sand cushioning under floors including watering and consolidation, complete all as specified and as directed.

Coloured machine vibro mechanically floated glossy finish interlocking cement paver block,any shape and size confirming to IS 15658-2006 of 60mm thickness,M-35 Grade with,topping of cement mixed with imported pigment, colour and shape shall be approved by GE. ISI Marked.

Providing cement concrete in steps, seismic and other similar bands, parapets and railings up to 60 cm in hieght, coping, kneeless apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Walling of random rubble,uncoursed,well bonded,bedded and solidly hearted built in cement mortar 1:6 complete all as specified and as directed.

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) in surafce channel and drains complete all as specified and as directed.

10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and as directed.

Brick work with sub-class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.

Cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary formwork etc complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, incl forms moulds, mitered/stopped ends etc complete all as specified and as directed.

150 mm bore Salt-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and as directed..

Cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in bed to 150 mm dia pipes including packing under, and haunching against the sides of pipes after they are laid and tested for complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel of 150mm internal dia of pipe (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed.

Providing Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) as in manholes cover slab etc complete all as specified and as directed.

Mild steel TMT bars 6mm to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Septic tanks, of size 1.5m x 1.5m x 1.5m in ordinary soil, foundation in PCC 1:4:8, brick bats dry, brick work in CM 1:4, mixed with WPC, RCC Slab covers including RCC slab manhole cover including chamber as required connected to sewage pipe line complete all as specified and as directed.

Screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 laying floor finished complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Machine cut kota stone slab flooring 18-20 mm thick as in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

150 mm wide strip of makrana white marble 20 mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting and polishing type complete all as specified and as directed.

Sheet window (box type) with glazed shutter factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note :- (i) The window shall be faricated as per Drg No. CEUZ/TD/1269/2008 Sheet 1/3 (ii) MS Fillets, glazing, wire gauge, glass shall be measured and paid separately.

Description all as per Srl item No. 99 here in before but without glazing bar complete all as specified and as directed. Note :- (i) The window shall be faricated as per Drg No. CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS Fillets, glazing, wire gauge, glass shall be measured and paid separately.

Pressed steel frames for doors made out of 1.25 mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12 mm bar thresh hold etc, complete of frame size 125 x 60 mm including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

Factory made 2nd class hard wood 35 mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kilin seasoned and chemically pressure treated complete all as specified and as directed.

Factory made 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze etc complete all as specified and as directed..

Excavation over areas not exceeding 1.5m in depth in any type of soil and getting out complete all as specified and as directed.

Boulders filling, dry hand packed tightly at back or retaining wall, (Boulder of 150mm size and over) complete all as specified and as directed..

Precast cement concrete 1:3:6 type C-1 using 20mm graded crushed stone agregate bonders for stone walling set in cement mortar 1:6 with plain fair faces including chamfers weathering etc complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints,, as specified , with maximum depression on face from straight edge n. exc 40mm for lime or sand stone complete all as specified and as directed.

PVC (SWR) pipe, 110 mm dia (ISI marked) in any length embedded in cement mortar for weep holes at locations complete all as specified and as directed.

Raised pointing to random rubble masonry, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position etc complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins arches pillars etc complete all as specified and as directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Dark shade vitrified ceramic tiles 10 mm thick ( square / rectangular ) polished dark /light shade, doubble charged/ultracharged tile area of each tile not exc 0.36 sqm in floors etc and jointed in neat cement slurry and pointed in white or coloured cement to match the work complete all as specified and as directed.

Digital vitrified ceramic tiles 10 mm thick ( square / rectangular ) polished dark/light shade, doubble charged/ultracharged tile area of each tiles not exc 0.36 sqm in vertical surface etc. and jointed in neat cement slurry and pointed in white or coloured cement to match the work using dark shade complete all as specified and as directed.

3 mm thick wall care putty on wall complete all as specified and as directed.

Two coat of Oil bound distemper including a coat of primer over including preparation of newly plastered surfaces of wall complete all as specified and as directed.

Aluminium drapery rods of 25 mm dia decorative type with wooden finish alongwith holding for brakets & end caps. complete all as specified and as directed.

Roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3.0 Kg/ sqm including 10mm thick flooring in CM (1:3) finished even and smooth mixed with water proofing compound complete all as specified and as directed. (WPC shall be measured and paid separately).

Powder coated aluminium window side hung aluminium window frame or chowkats 1.5 mm thick aluminium anodized of size 65 mm x 40 mm and window shutter frames (sides rail, top rail, bottom rail and middle rail) 1.5 mm thick aluminium anodized of size 45 mm x 45 mm including all fitting such as rubber gasket aluminium glazing clips, locking arrangement and 75 mm aluminium handle and including stainless wire cloth fixed with aluminium beads, aluminium tower bolt 100 mm, aluminium butt hinges 75 mm 02 No in each shutter, complete all as specified and as directed. (Size of window shall be as sper site requirement.)

Powder coated aluminium frame and grill for door, window,ventilators with one or more rebated incl jointing cleat for fixing etc complete all as specified and as directed.

Applying bituminous primer on roof surfaces @ 0.40 liters/Sqm and applying one coat of semi hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and thereafter supply and laying 3mm thick polymeric water proofing membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10 cms (overlaps to be thermo fused by flame) followed by another coat of semi hot blown bitumen 85/25 grade bitumen @ 0.70 Kg/Sqm and provide aluminium paint as per manufacturing instruction complete all as specified and as directed. Note:- Water proofing treatment will be done by IWL or through a specialized agancy.

Material and labour for Plain Cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified.

Rendering 20mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed.

Point wiring for one light point /fan/bell point controlled by one switch with 1.5 sqmm PVC insulated FRLS unsheathed copper conductor single core multi stranded flexible copper cable in and including not less than 2.00 mm thick 20 mm dia and over Non metallic Rigid PVC surface/Concealed Conduit ( ISI marked ) with and all accessories 1.5 mm thick mild steel terminal boxes concealed on walls, painting the same inside and out side with one coat of black bitumen paint with 3mm thick hylam brand bakelite sheet cover for fixing of piano switches/sockets/ regulator etc along with PVC insulated and unsheathed FRLS 1.5sqmm multi stranded copper conductor cable (green color) as earth lead, & connected to common earth and earthdolly, making good the disturbed surface to match with the existing specification complete all as specified and as directed.

All as per srl item No 127 but for 3 pin 5 Amps socket outlet independent including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Item No. 127 but for 3 pin 5 Amp Socket outlets point controlled by one modular switch 6A piano type on Same board with 1.5sqmm size of copper cable complete all as specified and as directed.

All as per description of Ser Item No.127 here-in-before but for one 3 pin 15A socket outlet on independent Board with PVC insulated unsheathed FRLS cable 4 sqmm copper multistrand conductor, along with PVC insulated and unsheathed FRLS 2.5 Sqmm multistrand copper conductor earth wire connected to common earth and earth dolly complete all as specified and as directed.

Switch piano flush button single pole one way 5 amps 240 volt complete all as specified and as directed.

Switch socket combination 5 Amps 2-in-1, 5 Pin flush type, 230 volts complete all as specified and as directed.

Ceiling rose surface bakelite 3 terminals complete all as specified and as directed.

Exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

LED light fitting 20 W, 220V, AC decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

LED light fitting mirror type with high out put diffuser 2 feet, 10 watt, 220V,C decorative box type with driver holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

LED light fitting 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Sheet metal enclosure MCB distribution board single pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately)

S&F in replacement MCB Single Pole and Neutral , 240 Volt, Raiting 32 Amps complete all as specified and as directed.

S&F in replacement MCB Single Pole, 240 Volt, Raiting 6 to 32 Amps complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electode 600mm x 600mm x 6.00mm thick burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level connected to and including galvanised steel earth lead wire 4 mm dia by means of bolts, nuts, chock, nuts and washers of galvanised iron or steel including PCC Pit in 1:2:4 type B-I angle iron frame with RCC cover and handle, excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mash and light grade GI protection pipe 15mm bore upto main board complete all as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected to main control board as specified and testing completion complete all as specified and as directed.

Supply & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2 core size complete all as specified and as directed. Make - KEI, Finolex & Polycab or equivalent. Note : Earth work and other connected work shall be measured & paid sperately.

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and as directed.

Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and as directed.

Switch Piano flush type 6 Amps single pole one way (Modular Type) with outer strip complete all as specified and as directed.

Socket combined 2-in-1, 3 Pin 6 & 16 Amps flush type (Modular Type) with outer strip complete all as specified and as directed.

Switch Piano flush type 16 Amps single pole one way (Modular Type) with outer strip complete all as specified and as directed.

S&F in repair Ceiling rose surface bakelite 3 terminals complete all as specified and as directed.

Supply & fix ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with burshless direct current motor (BLDC) complete all as specified and as directed.

S&F 2'x2' LED panel light capacity 48 Watt complete making all connection with suitable size flexible cable from ceiling rose to fitting all as per the directions of Engr-in- Charge. Make- Asco Model No AL CPL36 or equivalent make in WIPRO /HPL/Havells

LED tube light fitting capacity 20 Watt and making all connection using flexible cable of suitable size from ceiling rose to fitting including taking down old one complete all as specified and as directed. Make- Asco model No AL TL20 or equivalent make in Wipro /HPL/Havells

S&F in replacement MCB Single Pole and Neutral , 230 Volt, rating 40 Amp complete all as specified and as directed. Cat part No : 811034 Make : Indoasian

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25 mm dia including PVC insulated copper conductor cable 4.0 Sq mm as earth lead complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 04 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 2.5 Sqmm as earth lead complete all as specified and as directed.

S&F in replacement of Sheet metal enclouser single pole and neutral with 2 pin and earth plug and socket 20A 240V complete with one single pole MCB of any cap from 10Amp to 20Amp, 10KA complete all as specified and as directed.

Provn of wooden panelling on vertical surfaces of wall using following specification : (a) S&F wooden gutties 1st class hard wood of size 25mm x 25mm x 200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3. (b) S&F horizontal runners 2nd class sft wood (Kail) at 120 cm c/c of section area exc 13 Sqcm and not exc 25 Sqcm clean sawn treated with two coats of creosote Oil mixed with good quality Pesticide for antitermite treatment. (c) S&F 1st class soft wood (Deodar) boarding 12 to 15mm thick as in wall panelling planed one side, wrought on other side clean sawn with tongue/groove joints and applying two coats of good quality Varnish after proper preparing by sand paper etc. on planed surfaces and a coat of Primer mixed with pesticide for Antitermite treatment on the other side and fixed with screws/nails on wooden runners. (d) S&F 1st class soft wood (Deodar) decorative beading 40mm wide on top (and bottom if required) surface of wall panelling including two coats of Varnishing complete all as specified and as directed.

Material and labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered & scantling put together with glue pinned at joints, 2nd class HW complete all as specified and as directed.

Supply and fixing accoustic proof (noise absorption 0.95 NRC as per ASTM 423.90 fire rating 25 (A grade) ASTM-E-84 weather resistance with antifungal) 100% polyster fibre board sixe 600mm x 600mm x 16mm thick fixed in celing including GI powder coated snap grid frame work, complete all as specified and as directed. Make :-Armstrong or equvalent as approved by GE.

S&F for perforated particle board/tiles for insulation and Accoustic purposes, 60cm x 60cm in size, fixed with nails to timber frame work with staples on snap grid fixed with screws in ceiling complete all as specified and as directed.

S&F for 12mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work (Termite treated/water proof) complete all as specified and as directed. Make :- Green Ply/Kit ply)

M&L new plaster surface of wall surface and applying two coat of plastic emulsion paint (Shed approved by GE) over a coat fo primer and over two coat fo wall care putty 3 mm thick with primer complete all as specified and directed.

M&L complete removal of existing treatment of wall care putty and applying two coats of oil bound distemper over a coat primer with complete all as specified and directed.

RAMAN CONSTRUCTION CO

SINGH CONST CO

KALSOTRA CONSTRUCTION CO

VIRINDER SINGH

RAJ MOHD