SPECIAL REPAIR TO NCs E LIVING IN BILLET T 24 AND PROVISION OF CERTAIN BR AND EM WORKS IN BLDG NO P 199 AT AF STN GWALIOR

Amount

PART- A (B/R Portion)

Demolition of old concrete of any description and in any position not otherwise specifically provided for including removal of debris etc to a distance upto 2.50KM & depositing complete all as specified and directed.

M&L for cement concrete of 1:2:4 type B1 (20mm aggregates) as in roof kerbs or mud stops, tounded or chemfered on edges complete all as specified and directed

Demolition of PCC in ground floor & pavings (incl floor tile) n.exc. 15cm thick below or above G.L. including removal of debris etc to a distance upto 2.50KM & depositing complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring finished even & smooth complete all as specified and directed.

M&L for 50 mm thick PCC (1:2:4) type B1 (20 mm graded stone agg) as in flooring laid in alternate bays, finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:4:8) Type D2 (40 mm graded aggre-gate) as in sub base of flooring, foundations filling and mass-concrete complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick approved design & colour, set and jointed in neat cement slurry and pointed with colour cement to match shade of tiles including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

S&F in repair coloured powder coated drapery rod of aluminium 25mm dia with support of colour and pattern as approved by GE incl decorative brackets at both ends complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar) of approved colour, area of each tiles exc. 0.06 but n.exc. 0.11Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6) complete all as specified and directed

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar) of approved colour, area of each tiles exc. 0.11 but n.exc. 0.18Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6) complete all as specified and directed

M&L for coloured, glazed ceramic tiles size 450x350x 6-7mm thick as in dado/ skirting etc, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tiles, laid with and including over 10mm thick rendering in CM (1:4) all as specified and directed.

Taking up or down 15mm dia steel tubing & connections, segregating the serviceable pipes & connections complete all as specified and directed.

Taking up or down 20mm dia steel tubing & connections, segregating the serviceable pipes & connections complete all as specified and directed.

S&F galvanised steel water tubing (GI pipe) of 15mm bore, medium grade with all fittings and fixed to wall, floor and ceiling or any position as concealed type complete all as specified and as directed

S&F galvanised steel water tubing (GI pipe) of 20mm bore, medium grade with all fittings and fixed to wall, floor and ceiling or any position as concealed type complete all as specified and as directed

S&F in repair PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe incl fixing of brackets in CM 1:3 complete all as specified & directed.

S&F in repair WC squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, white, flat back, size 580mm x 450mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & PTMT waste coupling complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.

S&F in repair 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified and directed.

S&F in repair fancy type angle stop cock, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed both ends for pipe & fixed complete all as specified and directed.

S&F in repair fancy type bib tap, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed both ends for pipe & fixed complete all as specified and directed.

S&F in repair PVC connections of 15mm dia of PTMT of 450mm long complete all as specified and directed.

S&F in repair SS grating 100mm dia with waste hole fixed in cement complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail of 20mm dia, Dtype, 60cm long b/w flanges complete all as specified and directed.

S&F in repair CP soap dish plate with glass finish (glossy) complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with old size full brick subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Taking down cement plaster of any description from wall/ceiling incl raking out joints hacking for key, scrubbing down with water etc, complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified & directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified & directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified & directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified & directed.

Dismantling of asbestos cement ( corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling of framed truss of span n.exc. 10mtr complete all as specified and directed.

Dismantling of timber scantling of 40sqm in section and over in any position (unframed) complete all as specified and directed.

S&F for mild steel work as in roof trusses, trussed purlins, crane gantries, rails & fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl distance pieces, cleats etc confirming to Fe-290 (Gde-E-165) complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of 0.50mm thick (total coated thick) of any colour having minimum tensile strength 550Mpa as in roof covering fixed using hot dip galvanized self drilling and self tapping screws of appropriate size, sealed with integrated EPDM rubber washer for water tight fixing and side laps to be stiched using Alluminium pop rivets fixed on top of roof complete all as specified and directed.

Description same as item above, but plain steel sheet as in ridge

S&F for rubber beading of 40mm size strip, fixed in bottom of door complete all as specified and directed.

Taking down vantilators of area n.exc. 1.5Sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking of shutters from the frame) of area n.exc. 1.5sqm each complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking of shutters from the frame) of area exc. 1.5sqm & n.exc. 4sqm each complete all as specified and directed.

S&F 2nd class hardwood as Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick factory made plain framed, panelled shutters (two panel) of IInd class hard wood (any number & panels) with lock rail and styles with lock rail and panel of 9 mm BWP commercial ply or 12mm vaneered particle board with commercial vaneering on both face, the size of rail and style as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & directed.

S&F 35mm thick factory made second class hard wood glazed and skeltron door shutter open rebated and prepared to receive glass or gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut & metered beads for security glass/gauge etc, size of members of shutter, divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note :- Size of member of shutters as specified in SSR Part-I (2009) section 8 clause 8.20 (a).

S&F for solid PVC door frame of 50x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube and fixing in opening as per specifications and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed.

S&F 100 mm long butt hinge, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed.

S&F 150 mm long brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S&F 150mm size powder coated aluminium handles cast type of following size complete all as directed and specified

S&F 140mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F for steel door spring of size 200mm to wooden/steel frame by welding or screwing as whichever is appropriate for fixing in frame complete all as specified and directed.

S&F 250mm powder coated aluminium sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of following size complete all as specified and directed

S&F stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or wire staples complete all as specified and as directed.

M&L for PCC (1:3:6) Type C1 (20 mm graded aggre-gate) as in filling in holdfast blocks complete all as specified and directed.

S&F mild steel work as in small articles like band, strap, holdfast and similar items complete all as specified and directed.

M&L for preparation of new surfaces of steel & iron work of any description over 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

M&L for preparation of new surfaces of wood & wood based material of any description over 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

Dismantling of wall ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, incl cover fillets or aluminium grid frame work complete all as specified & directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified & directed. (Make: Armstrong/Everest/Gyproc)

M&L for GI frame work (grid size 605x605mm) for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm & web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each & web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with & including ceiling section (n.exc.1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm c/c incl hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteres 12.5mm dia 40mm long complete all as specified & directed.

S&F for colour powder coated aluminium frame work (min thickness of powder coating shall be 50micron) and shutters for door/windows/vantilators/partition with one or more rebates or aluminium section of two or more tracks in case of sliding windows incl jointing cleat for fixing complete all as specified & directed.

S&F for aluminium grills of size exc 5mm x 7.5mm and aperature n.exc. 80mm incl fixing with aluminium channel 1mm thick with steel screws and tint match with existing complete all as specified & directed.

S&F frosted sheet glass of 4mm thick, square or rectengular, area n.exc. 0.50sqm in each pane & fixing to aluminium windows, vantilator shutters complete all as specified & directed.

S&F ordinary sheet glass of 4.8mm thick, square or rectengular, area n.exc. 0.50sqm in each pane & fixing to aluminium frame, windows complete all as specified & directed.

M&L for 18-20mm thick machine cut granite, bedded & jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite stone incl cutting & polishing & chamfering or rounding of exposed edges as on cooking plateform/windows cill or other similar places over 15mm thick screed bed of CM (1:4) complete all as specified & directed.

M&L for grinding & polishing of kota stone flooring/skirting with stones and washing down with water and finally polishing to entire surfaces as satisfaction of GE complete all as specified & directed.

M&L for RCC (nominal mix) type B1 ratio 1:1.5:3 (using 20mm graded aggregate) as in columns, footings and plinth beam complete all as specified & directed.

M&L for RCC (nominal mix) type B1 ratio 1:1.5:3 (using 20mm graded aggregate) as in beams, lintel over 1.5m span complete all as specified & directed.

S&F TMT bars of 10mm dia and over cut to length, bent to shape as required incl cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia for lintel, slab complete all as specified & directed.

S&F TMT bars of 8mm dia and over cut to length, bent to shape as required incl cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia, as in stirrups for column, plinth beam, beam and lintel spaces & binders complete all as specified & directed.

M&L for formwork to sides of columns, post struts with square rectengular rough finished surface of concrete complete all as specified & directed.

M&L for formwork to sides of concrete foundations, footings bases of columns, plinth beam, lintel & similar works with flat rough finished surface of concrete complete all as specified & directed.

M&L for 10mm thick vitrified tiles of light shade (square/rectangular) area of each tiles n.exc. 0.36sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles incl and over 15mm thick screed bed in CM (1:4) complete all as specified & directed.

All as per item above but as in skirting/dado etc incl 10mm thick rendering in CM (1:4) on wall complete all as specified & directed.

S&F 6.3mm thick sheet glass of ordinary quality, square/rectengular, area exc 0.50Sqm in each pan and fixing to aluminium window, vantilator shutters complete all as specified & directed.

M&L for fixing of 3D wallpaper of 1mm thick waterproof PVC sheet of approved shade colour by GE complete all as specified & directed.

S&F for 12mm thick toughened glass as in gates/door incl all necessary fittings and making good the opening complete all as specified & directed.

S&F double action floor spring hydraulically regulated made up of 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts of mild steel heavy duty etc complete all as specified & directed.

PART- B (E/M Portion)

Taking down carefully existing unserviceable aluminum point wiring of any description & in any position with and including pvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’.

Material and labour for point wiring for one light/fan/exhaust fan point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including Concealed PVC conduit (Medium grade) of suitable size not less then 20 mm dia all as directed with using new sunken type pressed steel box/terminal boxes of suitable size, 2mm thick duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings wiring accessories with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE : (i) The quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing colour of surface.The portion of point wiring at ceiling shall be in surface conduit of suitable size fixed on ceiling surface with using PVC rawl plugs and provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick laminated sheet fixed with suitable GI screws and cup washers) (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A ' Make of Cable/wire:- : Havells /Anchor/Polycab/ Finolex Make of PVC Conduit/ casing Caping:-Finolex/AKG/ Jindal/ R K Electricals/ Srinath Pipes Ltd Make of Laminated Sheet:-/Hylam/National/Anchor

Description all as per item No 2.02 here-in-before but point wiring for one 5 pin socket outlet, 5/6 Amps on same board with other switch.

Description all as per item No 2.02 here-in-before but point wiring for 5 pin switch socket outlet, 5 Amps on independent board.

Description all as per item No 2.02 here-in-before but point wiring for one six pin socket outlet, 15/5 Amps (independent board) controlled by one switch with using 2.5 Sqmm (nominal area) stranded copper conductor.

M&L for switch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified. Make :- Cona/Anchor/Havells

M&L for socket outlet 2 in 1, 5 pin, 6 Amps, 240 volts flush type white ivory finish complete all as specified.Make :- Cona/Anchor/Havells

S&F switch socket combination multi purpose, 5 Pin 6 amps, 240 volts flush typeWith Indicator complete all as specified and directed. Make:-Cona/Leader/ Anchor.

S&F switch socket combination multi purpose, 6 Pin 6/16 amps, 240 volts flush typeWith Indicator complete all as specified and directed. Make:-Cona/Anchor/Havells

M&L for ceiling rose surface Bakelite three terminal, 18 x 50 mm complete all as specified.Make :- Cona/Anchor/Havells

M&L for lamp holder insulated body with back plate for batten fitting complete all as specified.Make :- Cona/Anchor/Havells

Supply and Fixing step type electronic fan regulator single phase ,230 volt, 100/120 watt . (Size of PT switch ) Make:-Cona/Anchor/Havells

Supply & Fix for decorative slim linear LED tube light fitting batten type 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified. Make-Havells / Bajaj/ CG

S& F for Street light fittings LED 35Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washer. Complete all as specified. (Make :Havells/ Bajaj/ CG)

Dismantling & Taking out MCB DBs VTPN any size , any type and capacity

Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed. Make-Schneider/Legrand/ Havells

Supply and fixing of sheet metal enclosure Double door for DB’s 4 way 415 volts with 200Amps, triple pole and neutral supply complete, fixed properly on MS strips and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires all as directed. Make-Schneider/Legrand/Havells

Dismantling & Taking out MCBs and isolators any size , any type and capacity and remove material from site of work all as directed.

S&F MCB single pole 6 to 32 Amps, "C" Curve ,240 Volts complete all as specified Make:Legrand/Schneider/Havells

S&F MCB Single pole and neutral 40 to 63 Amps, 240 Volts, 32KA complete all as specified. Make:Legrand/Schneider/Havells

S&F MCB, 40 to 100Amps, 50Hz, 415Volts with rupturing capacity 10KA 'C' curve complete all as specified. Make:Legrand/Schneider/Havells

Disconnecting & taking up or down unserviceable sub main wiring of aluminium/copper conductor with two single core cable and one run of single core earth cable of any description, any size & in any position incl taking out existing conduits of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed. (NOTE : (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit.

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 4.0 Sqmm of voltage rating upto and including 1100 Volts grade and one run of copper stranded conductor of size 4sqmm for continuos earthing drawn in and including voncealed PVC conduit, med grade of size not less then 20 mm bore incl to connect their incoming/outgoing electric connections by using required size of lugs/thimbles as well as flexible conduits complete all as specified and directed. NOTE : (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit. (ii) Make of Cable/wire:- : Havells /Anchor/Polycab/ Finolex Make of PVC Conduit:-Finolex/AKG/ Jindal/ R K Electricals/ Srinath Pipes Ltd

M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable FR of size 6.0 Sqmm of voltage rating upto and including 1100 Volts drawn in and including concealed PVC conduit med grade of dia not less than 25mm with standard accessories, along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductor of size 6.0 Sqmm as earth continuity conductor all as specified and directed. NOTE : (i) Two run of single core PVC cable FR with one run of earth conductor and conduit shall be measured as one unit. (ii) Make of cable : Make of Cable/wire:- : Havells /Anchor/Polycab/ Finolex Make of PVC Conduit/ casing Caping:-Finolex/AKG/ Jindal/ R K Electricals/ Srinath Pipes Ltd

M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers all as required and directed. Make:Legrand/ABB/Schneider

Taking down existing ceiling fan/exhaust fan and refixing the same to given location after cleaning, scraping, & two coats of synthetic enamel painting, greasing, oiling and connection with 3 Core flexible wire 1.5sqmm including provision of down rod, as per site requirement, if required complete all as specified & directed.

Taking down existing used gysers by disconnecting elect/water supply connections and refixing the same to given location after necessary civil, plumbing and electric connection work complete all as specified & directed.

M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing complete all as specified & directed. Note: Earth strip and protection pipe upto and including 7.5m deemed included in unit rate quoted by the contractor.

S&F in replacement of exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified & directed. Make: Havells/ Crompton Greaves/ Bajaj

S&F electric water heater storage type steel body with copper inner tank and heating element upto 2KW capacity 25Litre with 5star rating complete all as specified & directed. Make- Havells/Racold/Bajaj

Supplying, laying, jointing & testing of 16sqmm 4Core cable, 1100volts grade, stranded aluminium conductor, screened, XLPE insulated, armoured heavy duty laid in trenches/ducts/floors or fixed to wall etc complete all as specified & directed.

Excavation in trenches in soft loose soil n.exc.1.5m in deep and n.exc. 1.5m in width and getting out incl forming bottom surface to required slope/gradient for laying cables/pipes etc complete all as specified & directed.

Returning filling including spreading, levelling, watering and well ramming in layers of 25cm thick each layer after the cables are laid, jointed, tested complete all as specified & directed.

Removal of surplus excavated soil n.exc 50mtr distance and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified & directed.

M&L for sand filling with clean dry sand unwashed incl gently punning around cables in trench of cables protection complete all as specified & directed.

Supplying & laying Sub class 'B' bricks old size with axis of the bricks perpendicular to the axis of the cables as in cable protection complete all as specified & directed.

S&F 15mm dia GI pipe of medium grade complete all as specified & directed.

S&F 40mm dia GI pipe of medium grade for road crossing of cable and on pole and DB cable as in cable protection complete all as specified & directed.

Supply, Installation, commissioning of 40/80Ltr water cooler with 5star rating of fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity complete all as specified & directed.

S&F in repair 34W LED recess softline luminaire suitable for armstrong grid ceiling with high brightness LEDs and PMMA extruded diffuser giving glare free light & good aesthetic appeal. Fixture size 595x595x70mm complete with LED tube with driver & all accessories complete all as specified & directed.

S&F, testing of wall fan of 400mm sweep platina model (High speed) with step type regulator & connecting up incl connecting wire of 3core flexible cable of size 1.5sqmm copper wire from ceiling rose to connector of fan of length 0.5mtr complete all as specified & directed. Make:- Havells/Bajaj/CG

KISHAN CONSTRUCTION COMPANY

RAVINDRA SALES

M/S NIRMAL SINGH DHANJAL

GWALIOR TRADE LINK

M/S YOGANSH CONSTRUCTION CO.

M/s Subhash Construction Co.

Babatia super works