ROUTINE PREVENTIVE AND CORRECTIVE MAINT OF ANTI TERMITE TREATMENT OF BLDGS OF DOMESTIC AREA AT AF STN CHAKERI KANPUR

Amount

M&L along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exceeding 4.00 Sqm each each but with shutters (without taking off shutters from the frame) including cutting holes and making good the disturbed surface complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 sqm each but with shutters (without taking off shutters from the frame) including cutting holes and making good the disturbed surface complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube all as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick( stile), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, all as specified and as directed.

S & F PVC Butt hinges medium weight 100mm long for fixing of PVC doors complete all as specified and directed.

S & F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 150 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

Easing of door shutters exc 1.0 Sqm but n.exc 2.0 sqm each for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters n.exc 1.0 Sqm each kitchen cupboard shutters, show case shutter drawers incl fixing of screws adjusting handles, knobs tightening piano hinges incl misc small adjustments complete all as specified and directed.

S&F in repairs rubber beading 75mm wide fixing with nail/screw in door shutters complete all as specified and directed.

Hacking out old broken glass ( any thickness size ,quality or description ) from wooden frame or stone etc

S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each panes complete all as specified.

S&F 3.00 mm thick figured glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

S&F in repairs stainless steel kitchen rack standard size (24x36x10) inch complete all as specified and directed.

S&F in repairs 20 mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore complete all as specified and directed.

All as per item No 19 above but 20mm bore of pipes.

S & F steel water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 15 mm bore.

S & F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors.

Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc) of 20 mm bore.

Cutting chases in brick wall built in cement mortar for concealed water tubing and making good with cement mortar in 1:3 ,cutting depth not exc 10 cm girth as directed.

S & F in repair Swivel shower arm 15mm size, 195 mm long with bend of 45 degree with flange of PTMT any colour for fixing with 15 mm pipe, (Minimum weight 40 grms), complete all as specified and as directed.

S&F in repair fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) complete all as specified and directed.

S&F in repair fancy type Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-120 gms) complete all as specified and directed.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-90 gms) complete all as specified and directed.

S&F in repairs 30 mm wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed.

S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F in repair 300 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

S&F in repair aluminium anodized barrel tower bolts of extruded section length of bolt 150 mm complete all as specified and directed.

All as per item No 33 above but length of bolt 125mm complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles fabricated type 150 mm size complete all as specified and directed.

All as per item No 35 above but 125 mm size complete all as specified and directed.

S & F in repairs butt hinges medium weight cold rolled mild steel of size 100 mm long at any location complete all as specified and directed.

S & F in repairs butt hinges medium weight cold rolled mild steel of size 75 mm long at any location complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick (below or above ground level) complete all as directed by Engineer-in-Charge.

M&L for PCC (1:2:4) type B-1 as in flooring 40 mm thick using 20 mm graded stone aggregate cement concrete finish even and smooth with using extra cement complete all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store yard complete all as specified

M&L Coloured Glazed digital ceramic tiles(350x250)x7 mm/ (450x350)x7mm thick or as required size of 7 mm thick vertical surface as in dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed.

M&L non skid ceramic digital tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 15 mm thick plaster in CM 1:6 complete all as specified and directed..

M&L vitrified Tiles light shade coloured tiles 10 mm thick (square/ rectangular), light shade area of each tiles nexc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, shade/coloured over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 44 here-in-before, but for dado/skirting and over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed.

S&F in repairs rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, hoisted & fixed in position complete all as specified and as directed.

S&F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed.

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) complete all as specified and directed.

Dismantling of AC sheet corrugated /semi corrugated as in roof covering complete.

M&L for 6mm thick AC corrugated or semi corrugated sheet in roof covering etc fixed with `L' type or `J' type or cranked hooks including washer etc complete all as specified and as directed.

Ditto as per item No 50 above but except sheet.

S&F 0.80mm thick plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, achies, pillars complete all as specified as directed.

M & L Brick work with fly ash bricks, Straight or curved on plan exc. 6 m mean radius built in CM 1:6, complete all as specified and directed.

-ditto- as per item No 54 here in before but except bricks Note:- Old bricks obtained from item No 53 shall be reused after cleaning.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubbing down with water etc., all as directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonry of wall in CM (1:6) finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick or stone masonry of wall in CM (1:4) finished fair and even without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finish fair and even without using extra cement complete all as specified and directed.

M & L for preparation of new undecorated surfaces of walls and applying two coat of Oil Bound Distemper over a coat of primer and 1mm thick wall care putty, all as specified and directed.

M&L for preparation of surfaces and applying two coats of cement based paint over a coat of primer on walls complete all as specified and directed

M&L for preparation of surfaces and applying three coats of white wash on ceilings, all as specified and directed.

Dismantling wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

S & F for 12mm thick perforated false ceiling at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 X 595 mm of approval texture design and patterns having moisture content less than 2 %, humidity resistance of 99 %, NRC 0.50 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS 476 (Part-4)- 1970 and light reflectance of 85 % (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 1200mm and secondary intermediate cross -T of size 15 x 32 mm of length 600 x600 mm, suspended from ceiling using galvanised mild steel items (galvanised @ 80 grams per Sqm), 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x25x2 mm galvanised iron perimeter of size 24 x 24 x 0.40 mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws all as specified and directed by Engineer-in- Charge,.

M & L in repair for cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate, 75 mm dia outlet complete all as specified and directed.

S & F in repair 100 mm bore cast iron sanitary connection socket fixed to WC outlet etc complete all as specified and directed.

S & F in repair 75 mm bore cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors complete all as specified and directed.

Ditto all as per item No. 67 here-in-before but for 100 mm bore.

S & F in repairs 32 mm dia low density polyethylene pipes with bends as required (LDPE) of pressure rating 6 kg/sqcm, fixed to wall, ceilings or in floors etc complete all as specified and directed.

S & F in repairs 600 mm long PVC connection 15 mm size with PTMT nuts complete all as specified and directed.

S & F in repair 18 mm thick 100% Lead free one side plain laminated PVC/WPC sheet of any colour with using sunmica of choice colour on one side for kitchen cabinet shutters, shelves and shutters for cup board or similar use and required bracket etc. The panels shall be fabricated using adhesive and screws where ever required. All edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bent finish as per manufacturer's instruction and make approved by GE complete all as specified and directed. Note : All fittings and fixtures such as Soft closer, handles, piano hinges etc for shutter should be included rated quoted by the contractor.

SIDDHIVINAYAK CONSTRUCTIONS (BID ID -3098024)