COMPREHENSIVE MAINT OF BR, EM AND BS NATURE WORK UNDER GE GUWAHATI

Amount

B&R WORKS: Taking down chowkats or frame n exc 1.5 sqm each including shutter (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frame exc 1.5 sqm but n exc 4 sqm each including shutter ( without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of exc 1sqm and n.exc 2 sqm each complete all as specified and directed.

S & F 2nd class hard wood plain solid, straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F of 35mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commerical type on both sides complete all as specified and directed.

S&F of 35 mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a) complete, all as specified and as directed.

S& F 30 mm thick 2nd class hard wood glazed and skeleton shutters, divided into squres open rebated and prepared to receive glass, gauze, etc, (with sash bars),edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters, if windows , ventilators, etc are provided with stiles and rails as specified in SSR Part -I. section 8, clause 8.24(b) complete, all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and as directed.

S & F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube as per per specification and as directed.

Dismantling boarding any description, fixed in any position with nails all as specified and as directed.

S & F 2nd class HW Boarding fixed with nails in any situation (except flooring and skirting) 20mm thick planed one sides complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint (1st quality) over a priming coat of pink primer complete all as specified and directed.

M & L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint treating ends of posts, backs of chowkats etc, area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete all as specified and as directed.

S& F of 3 mm thick sheet glass ordinary quality and glazing with beads fixed with metal panel pins or spring clips in squares not exc 0.50 sqm in each pane complete all as specified and as directed.

S&F of 200 mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F of 125 mm long aluminium anodized, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

M&L for 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast section and fixing bolts, sliding bolts of cast aluminium alloy complete all as specified and directed.

S&F of 150 mm aluminum handle cast type anodized, complete all as specified and directed.

S&F 100 mm aluminum handle cast type anodized, complete all as specified and directed.

S & F of butt hinges, medium weight cold rolled, mild steel of size 100 mm complete all as specified and as directed.

S & F butt hinges medium weight cold rolled, mild steel of size 75 mm complete all as specified and as directed.

S & F butt hinges 100mm size extruded aluminium alloy with galvanised MS hinge pin, anodized and fixed type B-21 complete all as specified and as directed.

S&F in repair Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F of Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets any thickness including cover fillets complete all as specified and as directed.

M & L for Gl frame work for seamless ceiling Size of grid 605x605mm,comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified fixing 4 mm pre painted Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed

Dismantling MS work of any description complete all as specified and as directed.

S&F of framed work such as grills, guard bars, ladders, rallings frame work of water tanks etc conforming to Fe 290 grade E-165 complete all as specified and as directed.

Dismantling Corrugated steel Sheets any gauge, thickness, Nainital or Similar Pattern Roof Coverings complete all as specified and as directed.

S & F of Pre-painted galvalume aluminum zinc coating GI based corrugated/ semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and as directed.

M&L for Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in full brick thick walls, built in cement mortar 1:6 complete all as specified and as directed.

M&L Brick work with sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints, haking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil-emulsion over a coat of chalk whiting complete all as specified and as directed.

M & L for applying two coats of cement based paint after preparation of newly plastered wall surfaces over a coat of suitable primer complete all as specified and as directed.

Demolition of cement concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in hard standing complete including finishing surface of concrete toping even & smooth without using extra cement all as specified and directed.

Dismantling floor, hearth, wall tiling including cement mortar bedding (but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick cement screed bed in cement mortar (1:4) complete all as specified and as directed.

M & L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick cement screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size. 450x350x7mm thick on vertical surfaces of walls such as skirting dado etc over and including plaster 10mm thick in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles complete all as specified and as directed.

Cutting chases in brick walls for concealed water tubing and making wood in cement mortar 1:3, cutting n.exc 10cm girth complete all as specified and as directed.

S & F of 15 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete to walls, ceiling and laid in floors including taking down old complete all as specified and directed.

S & F of 20 mm dia steel tubing medium grade galvanised, with all fitting and fixed complete walls, ceiling and lain in floors including taking down old complete all as specified and directed.

S & F of 500 litrs capacity three layers rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of old and removal from site complete all as specified and as directed.

S & F of 1000 litrs capacity three layers rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including dismantling of old and removal from site complete all as specified and as directed.

S & F in repairs vitreous China squatting pan, Orissa pattern size 580 x 440mm white with integral foot rest and connection complete all as specified and as directed.

S & F in repairs vitreous China wash down water closet pan (pedestal pattern) white(excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repairs vitreous China wash basin, white, flat back, single 550 x 400mm excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets, waste coupling, short connection pipe complete all as specified and as directed.

S & F in repair, 10 ltr capacity PVC valve less, symphonic action type, flushing cistern, low level, with inlet ball valve, float and brackets including flush pipe and PVC connection pipe 15mm bore with PTMT nuts of length 450mm complete all as specified and as directed.

S&F 20mm dia Ball brass valves, high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20mm dia Ball brass valves, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F in repairs 15mm bore Bib taps, chromium plated, cast opper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm dia stop valves, cast copper alloy, chromium plated fancy type screwed down, high pressure, with cruthch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repairs 15mm dia pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'Cold' with long screwed shanks and flynuts screwed for iron pipe and fixed complete all as specified and as directed.

S & F in repairs PVC connection 15 mm bore 450mm long directed with PTMT nuts complete all as specified and as directed.

S & F M.S work as in bands, straps, support or stays for rain water pipes including bolts, if required hooks(stay), heavy, for large gates,hooks & pintle hinges large hasps and staples, chains,hand made sliding bolts,clamps & hold fasts, wall ties,hooks for hanging fans and similar small articles conforming to Fe- 410-0 or Fe 310-0 complete all as specified and as directed.

M & L for cement concrete type B-0, 1:2:4(using 12.5 mm graded stone aggregates) for hold fast complete all as specified and as directed.

M&L preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregates) as in surfaces channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 20cm to 40cm inner girth in cement concrete using extra cement including forms, moulds etc complete all as specified and as directed.

M & L for second class hard wood in wrought scantlings complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

M & L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote oil complete all as specified and as directed.

Removing blockage from WC/ floor trap/ nahani trap/ gully trap upto 1st manhole complete all as specified and directed.

De-silting/De-sludging the manholes/septic tanks not exc. 1.5m deep and getting out, removing & disposing off complete all as specified and directed.

De-silting/De-sludging the manholes/septic tanks exc 1.5m but not exc. 3m deep and getting out, removing & disposing off complete all as specified and directed.

Removal of blockage/ chock up obstructing the flow in sewage line by rodding with rods/wooden kempti/chock remover and making the continuous flow between two manholes for 150mm bore of pipe complete all as specified and directed. Note : The clear distance between two manholes shall be measured.

M&L for concrete bed in PCC 1:3:6 type C2 (using 40mm graded stone aggregated ) as in concrete bed to drain pipe 150mm dia pipes including packing under and haunching against the sides of the pipes after laying & testing of pipes including dismantling old P.C.C complete all as specified and as directed.

M & L for 150mm salt glazed stone ware drain pipes grade 'A' laid in trenches & jointed including taking out old pipe complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed.

S & F of 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends complete all as specified and as directed.

Demolition RCC of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M & L for precast cement concrete RCC cover slab type B1, 1:2:4, (using 20mm graded stone aggregates) for man holes, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed.

M & L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

INTERNAL ELECTRIFICATION: Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and as directed.

Taking down carefully unserviceable main switch and DB's including MCBs of of any size make, type and capacity and removing complete all as specified and as directed.

M & L for providing Point wiring with 1.5 sqmm (nominal area) single core PVC insulated FRLSH unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including PVC casing caping of adequate size but not less than 20mm in width and 1.2mm thick with all fittings and accessories including modular surface box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/fan point controlled by one, one way modular switches including one run 1.5 sqmm (nominal area) PVC insulated flame retardant unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 88.00 above but one light point controlled by two 2way switches.

All as per item No. 88.00 above but one bell/buzzer point controlled by one push button with other switches or independent board.

All as per item No. 88.00 above but one 3 pin 5 Amps socket outlet on same board with other switch.

All as per item No. 88.00 above but one 3 pin 5 Amps socket outlet on independent board.

All as per item No.88.00 above but wiring with 4 sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board.

M&L for sub main wiring using two single core 4 Sqmm FRLSH PVC insulated and unsheathed cable with copper conductor 1100 volts grade (FRLSH) ISI marked drawing in and including 25mm dia rigid non metalic PVC concealed conduit & accessories like bends, tee, etc fixed on recess of wall and ceiling and connecting to earth dolly including one single core 4 Sqmm earth wire, PVC insulated & unsheathed complete all as specified and directed. NOTE: (i) 2 runs of main wire + 1 run of earth wire + 1 run of conduit with accessories shall be measured as one length. (ii) Quoted rate is deemed to be included for cutting chases and making good disturbed surfaces to match with the existing surfaces.

Supply and fixing of LED Tubelight light fittings 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing of LED tube light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver, holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing Call bell, Ding Dong AC 230 volts, single pole complete all as specified and directed.

Supply and fixing Modular switch one way 5/6 Amp, 1 module, 240 Volts complete all as specified and directed.

Supply and fixing Modular switch two way 5/6 Amp,1 module, 240 Volts complete all as specified and directed.

Supply and fixing Modular Bell push 6 Amp,1 module, 240 Volts complete all as specified and directed.

Supply and fixing Modular socket 2/3 pin, 6 Amps, 2 module 240 Volts complete all as specified and directed. .

Supply and fixing Modular switch one way, 16 Amp,1 module, 240 Volts complete all as specified and directed.

Supply and fixing Modular socket 16A, 6 pin, 3 module 240 volts complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite two to three terminal 65 x 50 mm three terminal 250/230 volts ISI marked complete all as specified and directed.

Supply and fixing fan step regulator, 120W, 2 Module A/C 240 Volts complete all as specified and directed.

Supply and fixing Factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 240 Volts suitable for housing MCBs complete all as specified and as directed.

Supply and fixing MCB, SPN, 240 volts, 'C' Curve , 63 Amps 10 KA complete all as specified and as directed.

S&F MCB, SP, 240 volts, 20-32 Amps 10 KA ,C Curve, complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SI Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note:- Rate quoted by tenderers shall be deemed to include for following provisions-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 m. [ii].PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m complete all as specified and as directed.

EXTERNAL WATER SUPPLY: M & L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M & L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 110 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places complete all as specified and directed including taking down old unsv GI pipe of 100 mm dia complete all as specified and directed.

S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 90 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places complete all as specified and directed including taking down old unsv GI pipe of 80 mm dia complete all as specified and directed.

S&F in repair, 3- layer PP-R (Polypropylene random copolymer) pipes 63 mm outer dia ,SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including fittings PP-R plain & brass threaded type polypropylene random, jointing complete including laid in trenches/floor at places complete all as specified and directed including taking down old unsv GI pipe of 63 mm dia complete all as specified and directed.

S & F in replacement PP-R Gate valves (brass insert) complete for outder dia of pipe 63 mm incl taking down of gate valve of size 63 mm dia complete all as specified and directed.

EXTERNAL ELECTRIC SUPPLY: M & L for Sand cushioning for underground cable 8cm before laying the cable and 15cm (punned down to 18 cm) after laying and stretching the cable complete all as specified and directed. Note: Punned down thickness i.e 18cm shall be measured and paid.

M&L for brick protection cover to underground cable with sub-class ‘B’ old size over burnt bricks laid dry and flat across the axis of cable, abutting each other with gaps between adjacent bricks not exceeding 10mm complete all as specified and directed.

Material and labour including testing XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 50 Sqmm, 3.5 core complete all as specified and directed.

REFRIGERATION & AIR CONDITIONING: M & L for taking out the defective / burnt out compressor from Split type air conditioner/window type AC of 1.5 ton capacity from its position and providing new compressor Rotary / Reciprocating of approved make best suitable for the unit, cleaning the refrigeration system thoroughly with CTC, leak testing, vaccumisation, charging with new refrigerant gas suitable for the unit testing for its effective functioning, connecting up all electrical connections and finally testing and commissioning including cost of cutting, brazing, sealing the refrigeration tubing, replacement of stainer, CTC, refrigerant gas, CO2, etc. as required for the job complete all as specified and directed. Notes: Quoted rate is deemed to be inclusive for cutting, brazing, sealing the refrigeration tubing, replacement of stainer, CTC, refrigernat gas including transportation charges from site to workshop and back.

All as per item No. 120.00 above but for 2.0 Ton capacity floor mounted / tower model Split/window type Air Conditioner.

M & L for compressor suitable for refrigerator upto 400 litres capacity including charging of refrigerant gas and testing including taking out old defective compressor complete all as specified and directed.

M & L for compressor suitable for water cooler upto 150 litres capacity including charging of refrigerant gas and testing including taking out old defective compressor complete all as specified and directed.

M & L for compressor suitable for Deep freezer of any capacity including charging of refrigerant gas and testing including taking out old defective compressor complete all as specified and directed.

Supply and charging of refrigerant gas suitable for window / split air conditioners / water coolers / refrigerators complete all as specified and directed.

M & L for leak testing with N2 gas of entire refrigeration system, rectification of leaks by welding / brazing and pressure testing as per the standards and holding the pressure for 24 Hrs and observe for any pressure drop in the system including evacuation with vaccum machine complete all as directed.

Supply and replace unserviceable blower fan motor for hot air upto 2.0 Ton capacity Split air conditioner/window Air conditioner with new fan motor double shaft type suitable for air conditioners 800 to 1250 RPM including testing complete all as specified and directed.

Supply and replace unserviceable blower fan motor for water cooler upto 150 Ltr capacity complete all as specified and directed.

Supply and replace unserviceable blower fan blade for hot air / cool air suitable for split type/window type air conditioner upto 2.0 Ton capacity, balancing for smooth rotation in the casing and testing complete all as specified and directed.

Supply and replace unserviceable blower fan blade for water cooler upto 150 Ltr capacity balancing for smooth rotation in the casing and testing complete all as specified and directed.

POLISHING TO FURNITURE: M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of bed ply wood top complete all as specified and directed. Drg No. FD-246

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of sofa set 4 seater with cushion complete all as specified and directed. Drg No. FD-281

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of sofa set 5 seater with cushion complete all as specified and directed. Drg No. FD-281

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of chair dining complete all as specified and directed. Drg No. FD-16(M)/279/228

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of chair easy complete all as specified and directed. Drg No. FD-17(M)/229

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of chair writing complete all as specified and directed. Drg No. FD-20(M)/250/280

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of chair wooden bottom complete all as specified and directed. Drg No. FD- 285

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of peg table complete all as specified and directed. Drg No. FD- 25(M)/227/384

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of chair dining offrs complete all as specified and directed. Drg No. FD/MAP-II/04

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table dining 6 person complete all as specified and directed. Drg No. FD- 273/ FD/MAP-II/03

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table dining 8 person complete all as specified and directed. Drg No. FD- 30(M)/273/ FD/MAP-II/03

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of teapoy complete all as specified and directed. Drg No. FD- 278/382/232

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table centre complete all as specified and directed. Drg No. FD-274

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table dressing ladies complete all as specified and directed. Drg No. FD- 32(M)/251/FD/MAP-II-07

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table dressing gents complete all as specified and directed. Drg No. FD- 230/FD/E6/MAP/16

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table writing complete all as specified and directed. Drg No. FD- 275

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table 3x2 with and without drawer complete all as specified and directed. Drg No. FD- 283

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table 900x900x760mm, (3'x3') complete all as specified and directed. Drg No. FD- 291

M & L for preparation of surfaces by cleaning with emery paper to obtain clean surface and using putty wherever required and polishing with two coats of french polish to old and new surface of table dining 4 person complete all as specified and directed. Drg No. FD/MAP-II/03

Goswami Traders (BID ID -3120924)

JITU ENTERPRISE (BID ID -3121562)

LAXMI & GANESH ENTERPRISE (BID ID -3131293)

M/S SEWAK SINGH (BID ID -3128655)

M/s Dhani Enterprise (BID ID -3130496)