PROVN OF TOILET BATHROOM BLOCK NEAR BLDG NO E78 INCL ADDN ALTN TO OFFICERS MESS COOK HOUSE OF MH GOLCONDA PROVN OF BOUNDARY WALL AT OLD MD LINE OF 19 RAJPUT AND CERTAIN REV WORKS AT MHMD AREA UNDER GE GOLCONDA

Amount

Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation,etc., not exceeding 10 sqm on plan and n.exc 1.5 m in depth and getting out in hard/dense soil, complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc., and n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches exc 1.5m deep and n exc 1.5m wide and getting out in hard rock, complete all as specified and directed Note: (i) Hard rock obtained from excavation shall issued to contractor on credit. (ii) Hard rock obtained in excavation shall not be allowed for usage in masonry work.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc., and n exc 10 sq m on plan and n exc1.5 m in depth and getting out in soft/disintegrated rock complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

Earth filling under floors, spreading and levelling in layers n exc. 25 cm thick Add for well ramming including watering as required complete all as specified and directed . Note: Serviceable eath obtained from excavation shall only be used for filling.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils complete all as specified and directed

Removing excavated materials (soil) exceeding 250 not exc.500 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point compete all as specified and directed.

Removing excavated materials (soil) exceeding 500 metre and upto total distance of 1.5 km and depositing where directed at a level not exceeding 1.5 metre above the starting point compete all as specified and directed.

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for plain cement concrete (1:4:8) type D2 (40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and direcxted

M&L plain cement concrete (1:2:4), type B2 (40mm graded stone aggregate) as in surface channel and drains etc., complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type BI (20mm graded stone aggregate) in bed block for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating, complete all as directed.

M&L for RCC (1:1.5:3) type A1 (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

M&L for RCC (1:2:4) type B1 (20mm graded stone aggregate) as in lintels over 1.5m span complete all as specified and directed

M&L reinforced cement concrete (1:1.5:3) type-A1 (20mm graded stone aggregate ) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete etc complete all as specified and directed

M&L reinforced cement concrete (1:1.5:3) type-A1 (20mm graded stone aggregate as in beams, cantileavers, bressummers, lintels over 1.5 clear span etc complete all as specified and directed

M&L reinforced cement concrete (1:1.5:3) type-A1 (20mm graded stone aggregate Columns, pillars, piers,posts and struts etc complete all as specified and directed

M&L for brickwork with sub class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for Half brickwork with sub class B bricks, straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed

M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L Brickwork with fly ash bricks built in cement mortar 1:4 straight or curved on plan exc 6m mean radius, complete all as spd and directed.

M&L for 25 mm thick Damp proof course in plain cement concrete (1:2:4) Type B-0 (12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and directed

M&L for Walling of random rubble masonry, coursed, Secunderabad type, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed

M&L for use and wast formwork to sides of concrete foundations, footings , bases of columns , raft and raft beam , sides and soffits ( if any) of foundations and plinth beams and similar wok , vertical or batter for fair finished flat surfaces of concrete complete all as specified and directed

M&L Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) finishing rough finshined surface of concrete complete all as specified and directed

M&L use and wast formwork to rough finished surfaces of flat concrete, sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc for fair finished flat surfaces of concrete complete all as specified and directed

M&L for use and waste formwork to sides of pillars, posts, struts , piers , columns and stantions , for fair finished flat surfaces of concrete complete all as specified and directed.

M&L 2nd class hard wood plain fillerts exc 13 Sqcm and not exceeding 25 Sqcm all as specified and directed.

M&L 2nd class hard wood plain straight solid chowkats and frames wrought, framed, rounded, chamfered put together with glue pinned joints complete all as specified and directed

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed

S & F 2nd class hard wood, 35mm thick, factory made plain framed panelled shutter two pannel with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commerical veneering on both faes. The size of rail and stile as per IS 1003 Part-I klin seasoned and chemically pressure treated, complete all as specified and directed

S & F for small fittings of 2ns class hardwood such as brackets of any type latch and hinge blocks shapped door and window stops and the like including all necessary fittings, article n.exc 200 cu cm each complete all as specified and directed

Taking down chowkats or frames with shutters without taking of shutter from frame area exc 1.5 Sqm but not exc 4.00 Sqm each, complete all as specified and directed

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and directed

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc complete all as specified and directed

M & L for Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt in 150 mm etc complete all as specified and directed

S & F 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed

S & F 300 mm long mild steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed

S&F 100 MM mild steel butt hinges, with galvanised mild steel hinge pin, complete all as specified and directed

S&F 75MM mild steel butt hinges, with galvanised mild steel hinge pin, complete all as specified and directed

S&F 100 MM Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type B-21 complete all as specified and directed

S & F Continuous (piano) hinges,mild steel, bright finish or electro galvanised,Width of flaps (when open) in 30 mm etc complete all as specified and directed.

S&F 300mm rat rail rod pattern including spring all as specified and directed.

S & F 150 mm length of mild steel handles, fabricated type., anodised complete all as specified and directed

S & F 150 mm length of extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.4 mm & fixed with stainless steel wire staples fixed.

S& F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165,etc complete all as specified and directed.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts of size 25x3MM MS flat; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

M&L for mild steel TMT bars 6 to 8mm dia bars cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups cut to length , bent to shape required including bending, cranking , and hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

Dismantling of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), etc complete all as spd and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete complete all as specified and directed

M & L for 12 mm thick, Plywood, grade BWR, type BB, fixed with screws to timber frame work,for cub board,kitchen cub board and shelves and other uses etc completed all as specified.

M & L for 18/19 mm thick, Block boards, grade 2 quality, interior grade, commercial type, fixed with nails to timber frame-work, etc completed all as specified.

M & L for Machine cut cudappah stone slab 20-25mm thick laid over and including screed bed in cement mortar(1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified.

M&L 75 mm thick PCC (1:3:6) type C2 (40mm graded stone aggregate) in plinth protection, finished even and smooth w/o using extra cement complete all as specified and directed

M&L for 75 mm thick plain cement concrete (1:4:8) type D2 ( 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L for 25mm thick plain cement concrete (1:2:4) type B1 (20 mm graded stone aggregate) as in floors, complete all as specified and directed

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick backing coat in CM(1:4), complete all as specified and directed

M&L for non skid ceramic colour tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles, laid over and including 15mm thick screed bed or bedding layer in CM(1:6), complete all as specified and directed

M&L Rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1 : 6 and finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 10 mm thick plastering on brick, stone or concrete surfaces in cement mortar 1:4 surfaces finished even and smooth without using extra cement complete all as specified .

M&L for 5 mm thick rendering in CM 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of cement based primer on wall surfaces complete all as specified and directed.

M & L Preparation of newly plastered wall surfaces and apply three coat of white wash, complete all as specified and directed

M & L Preparation of newly plastered ceiling surfaces and apply three coat of white wash, complete all as specified and directed

S&F 3mm thick sheet figured glass, pin head type and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed

M & L for preparation of new surfaces of wood or wooden based material of width or grith exc 10 cm and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M&L preparation of new steel surfaces of any description,not exceeding 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

S&F Steel water tubes, 15mm bore, ‘medium grade’ galvanised, with all fittings and fixed to walls and ceilings or laid in floors , complete all as specified and directed

S&F Steel water tubes, 20mm bore, ‘medium grade’ galvanised, with all fittings and fixed to walls and ceilings or laid in floors , complete all as specified and directed

S&F 32mm Dia Unplasticiscd PVC pipes of pressure rating 10 kgf/cm2 laid for wash hand basin waste pipe complete all as specified and directed

S&F Double layered Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 liter complete all as specified and directed

S&F Double layered, Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 litres complete all as specified and as directed .

Supply and fixed 15 mm bore Bib taps, brass chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

Supply and fix Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed

S&F Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed 15mmbore complete all as specified and directed

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20 mm bore complete all as specified and directed

S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F of Ball valves high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed to 20mm bore pipe complete all as specified and directed

S&F of PTMT towel rail 600mm long fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and directed

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and directed

S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed

S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed

S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and directed

S&F PVC (SWR) bends any radius with access doors 75mm bore complete all as specified and directed

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door 75 mm bore complete all as specified and directed

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed

M&L salt glazed stone wave gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concrete complete all as specified and directed

Cutting in to existing manholes for connecting new drains making good to pipe 100mm internal dia and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section)in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate finished smooth and reforming benching complete all as specified and directed

S&F Vitreous china Urinal bowl flat back , size of 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete as directed complete all as specified and directed

S & F Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe) including P or S trap set in and including concrete complete all as specified and directed

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in complete all as specified and directed

Supply and fix wash hand basin Vitreous china white flat back size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed

S & F 35 mm thick IInd class hard wood factory made glazed and skelton shutters sizes of members as specified in SSR(Part-I) clause 8.20(a), open rebated and prepared to receive glass or gauge (without sash bars ) edges of framing plain, chamfered or rounded, fitted with cut and miterd beads for securing glass or gauge etc. complete all as specified as directed by Engr-in- charge.

S & F 30 mm thick 2nd class hard wood factory made glazed and skeleton shutter of divided into square, with plain chamfered or rounded metred and rebital sash bar any number and framing moulded windows, ventila-tors, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.20 (b) fitted to chowkats complete all as directed.

Taking down carefully existing copper/Aluminum point wiring of any description light, fan,sockets,bells etc., complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the dis turbed surfaces, walls, floors etc., to match with existing surface, complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLSH) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for surface type on stone/brick masonary walls, ceilings of roof etc., including in conceled new /old CI/MS sunk box 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, complete all as specified and directed

All as per item No: 112 hereinbefore but One 3 pin 5/6 Amps switch socket outlet on same board.

All as per item No. 112 hereinbefore but wiring with 2.5 Sq mm and 2.5 sqmm for earth continuity for 3 pin 15/16 Amps switch socket combination

M&L switch piano flush type single pole one way 5 Amps complete all as spcified and directed.

M&L switch socket combination flush type 5 Amps Multipurpose 2 in 1, 3 pin/2 pin with porcelain base all as specified complete all as spcified and directed.

M&L Switch socket combination 2 in 1 flush type universal 3 pin 5 Amps and 15 Amps complete all as spcified and directed.

M&L lamp holder, PVC/Polycaronate type insulated body with back plate suitable for battern fittings

S&F Ceiling rose surface 3 phase / PVC / polycarbonate,isolated body bakelite 65 x 50 mm 2/3 terminais all as specified

S&F Electronic ceiling fan regulator Stepped socket type type AC 240 V all as specifide and directed

S&F Sheet metal enclosure MCB distribution board including 200 Amps bus-bar single pole and neutral 240V, 8 Ways, including taking down of existing sheet metal enclosure complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps 240 Volts all as specified

S&F MCB single pole 240 Volts 6 to 32 Amps all as specified

S & F LED tube light fittings 1 x 22 W, 230V, complete with all accessories internally prewired and including LED Tube rod connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as specified and directed.

M&L Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 4.0 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including with all fittings suitable for surface type drawn in and including PVC conduit medium grade, complete all as specified and directed. Note : Two runs of copper conductor and one run of copper earth wire including PVC conduct will be measured and paid as one unit.

S & F Bulk head fitting 10W luminaires with all accessories including lamp holders etc complete with one No 10 watts LED bulb and connecting up with twin core twisted flexible PVC copper conductor cable of size 23/0.0076 from ceiling rose all as specified.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed , 2 Core 4 sq. mm nominal cross section in service connections , complete all as specified and directed.

S&F ceiling fan, five star rated, 1200mm sweep, AC 230 Volts 50 Hz including new down rod and fan hook fabricated including two coating of enamal paint , including necessary fittings and including ooks by disconnecting the fan from ceiling rose complete, complete all as specified and directed. Note: Old unserviceable ceiling fan is the property of MH Golconda and it should be deposite at MH store yard.

S & F Exhaust fan of sweep 300 mm, 1400 RPM, 230 volts, 50 Hz, four star rated, iron body with louvers, frame complete fixing to the wall, according to the hole provided and all as specified and directed.

M&L fabricated of iron bands,straps,supports or stays for rain water ,ventilating pipes including bolts if required hooks(stay) heavy for large gates ,hook and pintle hinges,large hasps and staples ,chains,hand made slidings bolts clamps hold fasts,wall ties hook for hanging fans,plain angles cleats for securing purlins to wood trusses or rafters ,knee piece inserts two way and three way straps plate washers and similar small articles conforming to Fe 290 Gde E-165, including clamps nuts,bold,fixing and old one complete all as specified and directed

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead all as specified and directed

S&F Steel water tubing, medium grade, galvanised, 25 mm bore with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc., complete all as specified and directed.

S&F gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 25 mm bore including taking down existing gate valve, complete all as specified and directed.

M&L Cutting and threading to existing GI pipe line upto 40 mm dia (in position)including 'Tee' for taking of branch connection/insertion of valve/insertion of flanges etc., including necessary jointing materia,l complete all as specified and as directed.

M & L for laying, jointing, connecting and testing XLPE/PVC insulated and sheathed UG heavy duty wire / strip armoured 1100 v grade solid/multistranded aluminium conductor cable of 3 core 16 sq mm.and all as specifeied and directed.

M & L for brick protection cover of old size bricks common burnt clay building bricks sub class ’B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent bricks not exceeding 10 mm complete all as specified.

M&L Dry river sand laid in trenches for cables cushioning on top and bottom of cables, complete all as specified and directed.

S & F Steel water tubes, light grade, galvanised, 40 mm bore, with all fitting as cable protection in trenches/on wall/on pole/ OHT all as specified and directed.

Supply & fixing in gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 40 mm bore including taking down complete all as directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for consealed type in brick masonary walls,roof etc including in new sunk box of required size and all as directed by Engineer-in-Charge & 2 mm thick plastic laminated sheet for housing switches sockets, regulators etc, including making good the disturbed surfaces to match with the existing specification ,complete all as specified and directed.

All as per item No:140 hereinbefore but One 3 pin 5/6 Amps switch socket outlet on same board with other switch complete all as spcified and directed.

All as per item No:140 hereinbefore but One 3 pin 5/6 Amps switch socket outlet on independent board complete all as spcified and directed.

S & F sheet meteal enclosure MCB distribution board double door type including 200 Amps bus-bar single pole and neutral 240V 4 way complete all as specified and directed.

S&F MCB single pole and neutral 40 Amps 240 Volts all as specified

S&F LED Building security lights New generation energy saving & enviromental friendly long life versitile pressure die cast aluminum roadway luminarie with high power LEDS 20 watts as light source and electronic driver bracket made into required shape for fittings complete with MS clamp, nuts and bolts and washsers as required at site of minimum 1.5 mtr long Med grade GI pipe 40 mm dia including painting with one coat of primer and two coat of aluminium paint complete all as specified and directed.

Dismantling posts and struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in concrete, brickwork masonary etc complete all as specified and directed

STANDARD AGENCIES