REPAIRS TO DIFFERENT TYPE OF FURNITURE AT VRDE AHMEDNAGAR 06

Amount

M&L for preparation of old painted iron & steel surfaces (externally & internally complete) of following furniture items (FD/TP) by scraping & rubbing down with grinder machine, removing dents and scratches if any, filling the same with paste filler and applying two coats of synthetic enamel paint by spray equipment Ist Grade quality complete(colour/shade shall be approved by Engr-in charge) all as specified and as directed by Engr-in-charge. (i) Book Case Steel (FD-1028, FD-90)

(ii) Book Shelf open Small steel (FD-69/TP)

(iii) Book Shelf open Large steel (FD-69/TP)

(iv) Almirah Large (FD-67,243).

(v) Almirah Med (FD-1031, 1034).

Repairs to Almirah steel large/Almirah steel 1/2H 1/2shelf & Almirah medium/small by replacing the following unserviceable parts with approved ones.all as per the drawings and as directed by Engr-in -charge.(DRG NO. FD-228) (i) S&F in repairs MS lock 6 lever with duplicate key.

(ii) S&F in repairs Stainless steel handle 150mm long.

(iii) S&F in repairs Complete internal locking device duly painted with one coat of red oxide primer.

(iv) S&F in repairs Leg made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

(v) S&F in repairs Shelf made out of 1mm thick MS sheet duly painted with one coat of red oxide primer.

(vi) S&F in repairs Cover for locking device made out of 1mm thick MS sheet duly painted with one coat of red oxide primer. Note:- Pattern and shape of lock and handle will be determined as per actual requirement at site.

M&L for preparation of old steel surface of chair varandah and welding loose joints, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint white colour (1st Grade Quality) and recaning with 4-5 mm half round 0.8mm thick plastic cane made out of virgin plastic in existing pattern complete.all as specified and directed by Engr-in-charge. (Drg No. FD-359/259/256/19)

(i) S&F in repairs hard rubber shoe suitable for chair varandah of approved quality.

Repair to Teapoy verandah by replacing the top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish all as per the drawings and as directed. (DRG NO. FD-246, FD-21)

Repair to table steel with /without drawer (900mmx600mmx760mm) by replacing the following parts with approved ones.as mentioned below and as per the drawings and as directed. (Drg No. FD-1007, 1008)

(i) S&F in repairsTop made out of 18/19mm thick pre-laminated MDF board (exterior gde) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish all as per the drawings and as directed.

(ii) S&F in repairs hard rubber toe of suitable size.

Removing old u/s top from table 900mmx900mm steel and S&F new top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish all as per the drawings and as directed. (Drg No. FD-1009)

(i) S&F in repairs Hard rubber toe for table 900mmx900mm of approved quality and suitable size.

Repairs to table office clerks steel by replacing the following parts with approved all as per the drawings and as directed. (DRG NO. FD-33,FD-249,FD-275,DB-3975).

(i) S&F in repairs MS lock of suitable size with duplicate key.

(ii) S&F in repairs Top made out of 18/19mm thick pre-laminated MDF board exterior gde (Designation PLMDF 11) one side with approved shade and balancing white lamination on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish all as per the drawings and as directed.

(ii) S&F in repairs hard rubber toe of suitable size.

Repairs to table office officer steel by replacing the following parts with approved all as per drawings and as directed by engr-in-charge. (DRG NO. FD231,FD-239,FD-224,FD-88).

(i) S&F in repairs MS lock of suitable size with duplicate key.

(ii) S&F in repairs PVC handle of approved quality suitable for drawer.

(iii) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF 11) one side with approved shade and balancing white on other side duly teakwood beading 4x18/19mm thick all around of suitable size fixed by panel pins and adhesive with diamond cut pattern finishing at corners and polished with high gloss finish of french polish all as per the drawings and as directed.

(iv) S&F in repairs hard rubber toe of suitable size.

Repairs to chair CB steel with arms by replacing the following parts with first class teak wood duly polished with high gloss finish of french polish all as per the drawings and as directed.

(i) S&F in repairs Seat/back (duly canned with approved quality of cane and as per Godrej pattern)

(ii) S&F in repairs new MS cleats of size 20mm x 3mmx40mm long duly welded to frame to support seat.

(iii) S&F in repairs Handle made out of first class teak wood.

(iv) S&F in repairs hard rubber shoe of approved quality and suitable size.

Repairs to Table bed side MAP by replacing the following parts with prelaminated MDF board(exterior gde)/plywood MR gde. Rest all as per drawings and as directed by Engr-in-charge. (Drg No.FD-28(M), FD-248, FD-276)

(i)S&F in repairs Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with teakwood beading of suitable size.

(ii)S&F in repairs Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL(Designation PLMDF-11) one side with approved shade and balancing white on other side complete.

(iii) S&F in repairs Back made out of plywood 6mm thick MR Gde.

(iv) S&F in repairs Bottom made out of plywood 6mm thick MR Gde.

(v) S&F in repairs Upper & Lower Drawer complete.

(vi) S&F in repairs CP handle of approved qulity and suitable size.

(vii)S&F in repairs Telescopic channel of suitable size and approved quality.

Repairs to bed hard MAP by replacing the following unserviceable parts with approved ones all as per drawing and as directed. Drg No. FD/E6/MAP/08

(i)S&F in repairs Plywood top 12mm(9 ply) thick MR Gde.

(ii) S&F in repairs Nut and bolt with washer complete.

(iii)S&F in repairs Pre-laminated MDFboard(exterior gde) of Head rest complete.

(iv) S&F in repairs Pre-laminated MDFboard(exterior gde) of foot rest complete.

(v) S&F in repairs PVC cap of suitable size.

Repairs to Chair executive revolving high back by replacing unserviceable parts as per drawings/ TP and as directed by Engr-in- charge. Drg No. TP

(i)Supply & provide tapestry cloth to seat and back complete.

(ii) Supply and provide rexine cloth to seat and back complete.

(iii)S&F in repairs Hydraulic arrengment of suitable size.

(iv) S&F in repairs Base complete with Wheel of suitable size & pattern.

(v) Arms as requred by size and design(spl). Note:- Sample and shade of materials will be determined as per actual requirement at site. Cost of tapestry cloth shall not be less than 150/-per meter.and Cost of rexine cloth shall not be less than 350/- per meter .

Repairs to Chair revolving med/ low back by replacing unserviceable parts as per drawings/TP all as directed by Engr-in-charge. Drg No. TP

(i)Supply and provide tapestry cloth to seat and back complete.

(ii) S&F in repairs Hydraulic arrengment of suitable size.

(iii) S&F in repairs Base complete with Wheel of suitable size & pattern.

(iv) Arms as requred by size and design. Note:- Sample and shade of materials will be determined as per actual requirement at site. Cost of tapestry cloth shall not be less than 150/-per meter and Cost of rexine cloth shall not be less than 350/- per meter.

Repairs to Chair writing Map by replacing unserviceable parts as per drawing all as directed by Engr-in-charge.(Drg No.FD-20,FD-250,FD-218,FD-280).

(i)Supply & provide tapestry cloth to seat and back complete.

(ii) Supply & provide Foam to seat/ back complete.

(iii) S&F in repairs Plywood to seat /back.

(iv) Arms as requred by size and design. Note:- Sample and shade of materials will be determined as per actual requirement at site. Cost of tapestry cloth shall not be less than 150/-per meter.

M&L for Spot welding on various items of steel furniture. FD/TP

Removing unserviceable plywood from Charpoy plytop and providing 12mm thick(9 ply) plywood MR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade all as per drawing & as directed by Engr-in-chage.(DRG NO.FD-246,FD-21)

Removing unserviceable plywood from Charpoy folding and providing 8/9mm thick plywood MR Gde with suitable size of nut and bolt including welding of loose joints,if any and painting by brush with one coat of 1st quality synthetic enamel paint of approved shade all as per drawing & as directed by Engr-in-chage.

Removing unserviceable plywood from Charpoy GI Pipe and S&F 12 mm thick (9 ply) plywood of MR Gde duly teakwood beading 12mm thick half round dia all around of suitable size fixed by pannel pins and adhesive with diamond cut pattern finishing at corner and fixing with suitable size of nut,bolt and washer to frame after titening of complete frame including welding of loose joints,if any and painting of flat/angle iron by brush with one coat of 1st quality synthetic enamel paint of approved shade all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-28 ) Note:- Shape,pattern and size of nut, bolt and washer shall be approved by EIC.

Repairs to charpoy GI pipe nylone newar by replacing the following unserviceable parts with approved ones.Rest all as per drawings and as directed by Engr-in charge. (DRG NO. FD-246)

(i) S&F in repairs nylon newar 50/55 mm width ( white colour),made out of virgin plastic of approved quality woven in V shape and sample as available in BSO office. Note:- (i) The weight of nylone newar shall not be less than 1.5 kg per charpoy. (ii) The entire frame includuing legs of charpoy shall be titened before weaving.

(ii) S&F 3 way medium gde GI elbow ISI marked suitable for 32mm bore GI pipe.

(iii) S&F GI check nut medium Gde of suitable for 32mm bore GI pipe.

Repairs to bed plywood top by replacing the following unserviceable parts with first class teakwood as per drawings and as directed. (DRG NO. FD-228)

(i) S&F in repairs 3.5/4mm thick teak face plywood, including half round teakwood beading if broken on both side of head rest complete.

(ii) S&F in repairs 3.5/4mm thick teak face plywood, including half round teakwood beading if broken on both side of foot rest complete.

(iii) S&F in repairs Plywood 12mm thick(9 ply) MR Gde of suitable size.

Repairs to Chair dining cushioned MAP by replacing the following unserviceable parts with first class HW teakwood all as as per drawings and as directed. (Drg No FD-228,279(A))

(i) Supply & provideTapestry/ Rexine cloth with foam 75mm 32 density and plywood 12mm thick suitable size of seat complete. Note:- Sample and shade of materials will be determined as per actual requirement at site. Cost of rexine & tapestry cloth shall not be less than 250/-per meter .

Repairs to Peg table by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde). Rest all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-236, FD-277)

(i) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size all as per the drawings and as directed.

Removing existing old/unserviceable canes from different types of chairs and recaning the same with 2mm half round dia made out of virgin plastic in godrej pattern as shown on relevent drawings complete all as specified and directed by Engr-in-charge.

Repairs to Teapoy by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior Gde) all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-228)

(i) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior Gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size all as per the drawings and as directed.

Repairs to Table centre by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) all as per drawing & as directed by Engr-in-charge. Drg No. FD-235 & 274

(i) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size all as per the drawings and as directed.

Repairs to Table 900mm x600mm without drawer/ With drawer by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior Gde) all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-33,FD-249,FD-275,DB-975)

(i) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size all as per the drawings and as directed.

Repairs to Table dinning (1200mm x900mm) by replacing the following unserviceable parts with first class teakwood /prelaminated MDF Board (exterior Gde) all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-273,FD-239,DB-1008)

(i) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior Gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size all as per the drawings and as directed.

Repairs to Table dinning 6/8 person by replacing the following unserviceable parts with teakwood /prelaminated MDF Board (exterior gde) all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-273,FD-239,DB-1008)

(i) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior gde MDF board duly teakwood beading 4x18/19mm thick all around of suitable size all as per the drawings and as directed.

Repairs to Table dressing ladies with mirror by replacing the following unserviceable parts as per drawing & as directed by Engr-in-charge. (DRG NO. FD-27)

(i) S&F in repairs Top made out of 18/19mm thick pre-laminated exterior Gde MDF board OSL (Designation PLMDF-11) of approved shade duly provided teakwood beading infront of suitable size.

(ii) All as per item no 29.01 but bottom complete.

(iii) All as per item no 29.01 but side complete.

(iv)S&F in repairs Back ply of base made out of plywood 12mm thick (9ply) MR Gde complete.

(v) S&F Mirror 5mm thick of suitable size.

(vi)S&F Plain glass 5 mm thick for sliding.

(vii) S&F in repairs Aluminium channel complete of suitable size for sliding of glass.

(viii)S&F in repairs Drawer complete.

(viii) S&F in repairs Leg with frame made out of first class teakwood.

Repairs to Table writing by replacing the following unserviceable parts all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-33,FD-249,FD-275,DB-3975)

(i)S&F in repairs Top made out of 18/19mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) of approved shade duly providing teakwood beading all around complete.

Repairs to Sofa set 5/4 seater by replacing the following unserviceable parts with first class teakwood.Rest all as per drawing and as directed by engr-in-charge. (DRG NO. FD-281,FD373,FD-258)

(i) S&F in repairs Leg.

(ii) S&F in repairs Arm.

(iii) S&F in repairs Side rail.

(iv) S&F in repairs Batton seat/back.

(v) S&F in repairs Front rail of single seater.

(vi) S&F in repairs Front rail of three seater.

(vii) S&F in repairs Back rest rail top/side of single.

(viii) S&F in repairs Back rest rail side of three seater.

(ix) S&F in repairs Back rest rail top of three seater.

(x) Removing old foam cushion with tapestry cloth and S&F new P.U. Foam cushion of size 530mmx560mmx100mm (40 density) duly covered with approved quality of tapestry cloth. Make of foam cushion:- Sleepwell / Kurlon. Note:- Cost of tapestry cloth shall not be less than 250/- per meter. Colour of tapestry cloth shall be as directed by EIC.

(xi) Removing worn out tapertry cloth from old cushion and replacing the same with new tapestry cloth of approved quality. Note:- Cost of tapestry cloth shall not be less than 250/- per meter. Colour of tapestry cloth shall be as directed by EIC.

Repairs to fully uphostry sofa set 5 seater cladded with tapestry cloth by replacing tapesty cloth of approved quality including replacement of unserviceable material like cotton,coir,foam,GI spring, wooden members etc. and polishing the exposed surface of the same with high gloss finish of french polish all as per drawing / TP and as directed by Engr in charge. Note:- Sample and shade of material will be determined as per actual requirement at site.cost of tapestry cloth shall not be less than 350/- per meter. Colour of tapestry cloth shall be as directed by EIC.

All as per item No.32.00 above but tapestry cloth only without damaging the other parts of sofa set all as per drawing/ TP and as directed by Engr in charge. Note:- Sample and shade of materials will be determined as per actual requirement at site. Cost of tapestry cloth should not be less than 350/- per meter. Colour of tapestry cloth shall be as directed by EIC.

Repairs to Table computer by replcing the following unseviceable parts all as per the drawings and as directed by Engr-in-charge.

(i) S&F in repairs Top made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side duly provided with PVC beading as required complete.

(ii)S&F in repairs Side made out of 18/19 mm thick pre-laminated exterior gde MDF board OSL (Designation PLMDF-11) one side with approved shade and balancing white on other side.

(iii) All as per item no 34.01 but Key board drawer complete.

(iv) All as per item no 34.01but mouse drawer complete.

(v) All as per item no 34.01 but middle shelf complete.

(vi) All as per item no 34.01 but bottom shelf complete.

(vii) S&F in repairs Telescopic channel of suitable size and approved quality. Note:- Sample and shade of materials will be determined as per actual requirement at site.

Dry cleaning of chair computer,chair revolving med/high back and chair visitor, chair writing MAP by soda,sampoo,castic,urea, chemical etc to clear the dust.

Dry cleaning of full upholstery sofa set 5 seater by soda,sampoo,castic,urea, chemical etc to clear the dust.

M & L for preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfaces including the new fixed wooden parts with sand paper, removing pluck marks with wooden scraper, cleaning of dirt and stopping holes by filling putty by adding colour of required quantity to obtain the desired colour, wiping old superfluous filler and allow to dry, rubbing off surfaces with sand paper until smooth surfaces is achived, wiping off the polish from other than wooden surfaces with polish thinner and applying French polish till glossy finish is achieved complete all as specified and as directed by Engr-in-charge.

(i) Bed hard

(ii) Chair dinning cushioned

(iii) Chair dinning

(iv) Chair writing

(v) Chair easy

(vi) Table peg

(vii) Teapoy

(viii) Table centre

(ix) Table 900mmx600mm without drawer

(x) Table dinning 1200mmx900mm

(xi) Table dinning 6/8 pers

(xii) Table dressing ladies w/ mirror

(xiii) Table writing

(xiv) Sofa set 5 seater FD-281/373/258

Repair to various type of wooden chairs and tightening the whole frame of chair FD/TP

Repair to various type of wooden Table and tightening the whole frame of Table FD/TP

S&F in repairs brass type drawer handles , projection dropped (50 mm to 65 mm) on screwed plate all as specified and as directed by Engr-in-charge.

Removing unserviceable plywood from Charpoy & provide 10 mm thick plywood of MR Gde duly teakwood beading 10mm thick half round dia all around of suitable size fixed by pannel pins and adhesive with diamond cut pattern finishing at corner and fixing with suitable size of nut,bolt and washer to frame after titening of complete frame all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-28 ) Note:- Shape, pattern and size of nut, bolt and washer shall be as approved by EIC.

Removing unserviceable plywood from Charpoy & provide 12 mm thick plywood of MR Gde duly teakwood beading 12mm thick half round dia all around of suitable size fixed by pannel pins and adhesive with diamond cut pattern finishing at corner and fixing with suitable size of nut,bolt and washer to frame after titening of complete frame all as per drawing & as directed by Engr-in-charge. (DRG NO. FD-28 ) Note:- Shape, pattern and size of nut, bolt and washer shall be approved by EIC.

Removing unserviceable plywood from Charpoy & provide 18 mm thick plywood of MR Gde duly teakwood beading 18mm thick half round dia all around of suitable size fixed by pannel pins and adhesive with diamond cut pattern finishing at corner and fixing with suitable size of nut,bolt and washer to frame after titening of complete frame. Rest all as per drawing & as directed by engr-in-charge. (DRG NO. FD-28 ) Note:- Shape, pattern and size of nut, bolt and washer shall be approved by EIC.

KAMINS CARE

ASHUTOSH BUILDERS

M/s National Traders