Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.0 LAccepted-AOC FLAT NO 2 AMEYA APARTMENT SHIV COLONY NEAR PANDAV NAGARI INDIRA NAGAR NASHIK 422009 | NASHIK | NASHIK | MAHARASHTRA | 422009 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹22.2 L+₹1.6 L (7.54%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹22.3 L+₹1.6 L (7.65%)Rejected-Finance | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹27.8 L+₹7.1 L (34.2%)Rejected-Finance 154 HANUMAN MANDIR DIKSHI TAL NIPHAD DIST NASHIK 422 302 | NASHIK | MAHARASHTRA | 422302 | L4 | Rejected-Finance BEING NOT L1 | |
| 5 | Rejected-Technical PI NO 13 S NO 81 82 BEHIND 132 33 KVA MSEB SUBSTATION MIDC AREA AMBAD NASHIK 422 010 | NASHIK | NASHIK | MAHARASHTRA | 422010 | - | Rejected-Technical CATEGORY NOT ENLISTED AS PER NIT |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
24 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF OJHAR
GE AF OJHAR
COMPREHENSIVE MAINT OF CERTAIN WATER SUPPLY INSTALLATION ALONGWITH CONNECTED ITEMS AT 11BRD AF STATION OJHAR
2023_MES_634651_1
8137/E8
Open Tender
Electrical and Maintenance Works
Item Rate
335 days
OJHAR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE AF OJHAR
₹60,000
Yes
15 Mar 2024
28 Dec 2023
26 Jan 2024
29 Dec 2023
24 Jan 2024
11 Jan 2024
Amount
Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr deep and getting out in soft loose soil all as specified and directed
Returning, filling in including spreading, levelling watering and well ramming in layer not exce 25 cm, all as specified and directed
Removing excavated soil to a distance not exce 50 mtr and deposited where directed at a level not exceding 1.5 mtr abvoe the starting point all as specified and directed.
Cutting existing cast iron pipe in position for insertion of new pipe/tees, branches etc. of size 300 mm dia
All as per Item No.4 above but 250 mm dia
All as per Item No.4 above but 200 mm dia
All as per Item No.4 above but 150 mm dia
All as per Item No.4 above but 100 mm dia
Taking up cast iron water mains including flanged rubber joints with spigot and socket ends and lead joint burning out and recovering lead of size :- 300 mm dia
All as per Item No.9 above but 250 mm dia
All as per Item No.9 above but 200 mm dia
All as per Item No.9 above but 150 mm dia
All as per Item No.9 above but 100 mm dia
All as per Item No.9 above but 80 mm dia
Supply and laying cast iron pipes with spigot and socket ends centrifugally cast, Class LA, in any length laid in trenches of size 300 mm dia
All as per Item No.15 above but 250 mm dia
All as per Item No.15 above but 200 mm dia
All as per Item No.15 above but 150 mm dia
All as per Item No.15 above but 100 mm dia
All as per Item No.15 above but 80 mm dia
M&L for run lead joints complete for water mains with spigot & socket pipes and fittings, all as specified and directed. Bore of pipe :- 300 mm dia Note : Rate for excavation and earth work incl T&P as reqd at site for each joint are deemed to be included in quoted rates.
All as per Item No.21 above but 250 mm dia
All as per Item No.21 above but 200 mm dia
All as per Item No.21 above but 150 mm dia
All as per Item No.21 above but 100 mm dia
All as per Item No.21 above but 80 mm dia
Supply & fix rubber tyton joint of size 300 mm dia
All as per Item No.27 above but 250 mm dia
All as per Item No.27 above but 200 mm dia
All as per Item No.27 above but 150 mm dia
All as per Item No.27 above but 100 mm dia
All as per Item No.27 above but 80 mm dia
Supply & fix mechanical joint ISI marked for spigot end pipe of size : 300 mm Note : Rate for excavation and earth work incl T&P as reqd at site for each joint are deemed to be included in quoted rates.
All as per Item No.33 above but 250 mm
All as per Item No.33 above but 200 mm
All as per Item No.33 above but 150 mm
All as per Item No.33 above but 100 mm
All as per Item No.33 above but 80 mm
Dismantling/taking out unserviceable air release valve of size 80 mm by opening/cutting rusted nuts, bolts etc all as specified and directed.
Supply and fix cast iron double ball air release valves of size 80mm as per IS 14845, PN rating H-7 ISI marked.
Dismantling/taking out unserviceable non return valve of siz 150 mm to 200 mm by opening /cutting rusted nuts, bolts etc all as specified and directed.
Supply and fix CI double end flanged and drilled non return valve of following sizes ISI marked. 300 mm dia Make Zoloto /BIR or Equivalent
All as per Item No.above but 150 mm dia Make Zoloto /BIR or Equivalent
Supply & fix Fully Automatic Star Delta Motor starter 20 HP in sheet-steel enclosure type MK-1S (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 9-14
Supply & fix DOL Motor starter 7.5 HP in sheet-steel enclosure type MK-1 (Motor Rating AC-3 Duty, 415V, 50Hz, 3-Ph) and Relay Range 9-14
Disconnecting electrically and disengaging the AC Squirrel cage induction motor 3 phase 415 Volts, 50 Cycles, and taking out to local workshop induction motor 60 HP/50 HP/40 HP for repair purpose including complete cleaning,varnishing ,reinsulation and replacement of DE /NDE bearings and greasing and including shifitng back to location as directed, installing, testing and commissioning after repair complete all as specified and directed. (note- Rewinding will be measure & paid seperately under relavant item of sch.)
All as per Sr item No 46 above but of capacity 25 HP/20 HP/15 HP
All as per Sr item No 46 above but of capacity 10 HP/ 7.5 HP
Material & labour for Rewinding the motor with super enamelled copper winding wire with appropriate same gauge of existing coil with similar class of existing insulation as recommended by manufacturer with high quality normex insulating paper applying best quality insulating varnish on stator/rotor windings drying them completely, testing the insulations as directed by engr -in - charge
Material & Labour for Repairs to centrifugal pump set of Make :Kirloskar, Model No DSM 4M ,32 LPS discharge and 50 HP capacity installed at sakora pump house (For technical area),,dismantling the pump set carefully from its connected electric motor including disconnecting and taking out the electric motor,transporting the pumpset to workshop for complete overhauling the pump set with the following replacement/repairs of pump set respectively all as specified and directed by Engineer-in-Charge. opening it through its casing For Dismantling pump and motor and carrying out repairs/overhauling including cleaning of casing and impeller, clogged, discharge line and oil chamber, Greasing and oiling of all moving parts & Refixing and recommissioning of pump with motor in proper alignments and recommissioning ,testing of pump set to the complete satisfaction of Engineer in charge. (Note:- Spares as required shall be measure & paid seperately against the relevant items).
supply & fix Casing Wear Ring
supply & fix Shaft sleeve
supply & fix Inter Stage Ring
supply & fix Ball bearing SKF - 7310
supply & fix Ball bearing SKF - 6310
supply & fix Bearing cartridge DE
supply & fix Bearing cartridge NDE
supply & fix shaft sleeve Nuts
supply & fix Split Gland
Supply and fix oil seal set
Supply and fix in Repair to bush cast alloy
Supply and fix in Repair to the main spindle shaft
Supply and fix in Repair to the key and impeller
Supply and fix in Repair/Replacement to the Existing coupling with tyre coupling including drilling required side of hole on either side.
Supply and fix in Replacement of terminal plate for electric motor.
Supply and fix in Repairing of Sleeve of the casing of the bearing & Repair of any major or minor defects
All as per Sl. Item No.50 here in before but of Make :Kirloskar, Model No DSM 80/35 ,66 cu.m/hr discharge and 40HP capacity installed at sakora pump house (For Raksha Nagar area) to the complete satisfaction of Engineer-in-Charge.
supply & fix Casing Wear Ring
supply & fix shaft sleeve
supply & fix Inter Stage Ring
supply & fix Ball bearing SKF - 7310
supply & fix Ball bearing SKF - 6310
supply & fix Bearing cartridge DE
supply & fix Bearing cartridge NDE
supply & fix shaft sleeve Nuts
supply & fix Split Gland
Supply and fix Oil seal set
Supply and fix in Repair to bush cast alloy
Supply and fix in Repair to the main spindle shaft
Supply and fix in Repair to the key and impeller
Supply and fix in Repair/Replacement to the Existing coupling with tyre coupling including drilling required side of hole on either side.
Supply and fix in Replacement of terminal plate for electric motor.
Supply and fix in Repairing of Sleeve of the casing of the bearing & Repair of any major or minor defects
All as per Sl. Item No.50 here in before but of Make :Kirloskar, Model No DSM /4MB , 128 cu.m/Hr capacity and 60 HP capacity installed at sakora pump house (For technical area) , to the complete satisfaction of Engineer-in-Charge.
supply & fix Casing Wear Ring
supply & fix shaft sleeve
supply & fix Inter Stage Ring
supply & fix Ball bearing 7310
supply & fix Ball bearing 6310
supply & fix Bearing cartridge DE
supply & fix Bearing cartridge NDE
supply & fix shaft sleeve Nuts
supply & fix Split Gland
Supply and fix oil seal set
Supply and fix in Repair to bush cast alloy
Supply and fix in Repair to the main spindle shaft
Supply and fix in Repair to the key and impeller
Supply and fix in Repair/Replacement to the Existing coupling with tyre coupling including drilling required side of hole on either side.
Supply and fix in Replacement of terminal plate for electric motor.
Supply and fix in Repairing of Sleeve of the casing of the bearing & Repair of any major or minor defects
All as per Sl. Item No.50 here in before but of Make :Kirloskar, Model No UP/00/35 , 108 cu.m/Hr capacity and 20 HP capacity installed at sakora pump house (Raksha Nagar) to the complete satisfaction of Engineer-in-Charge.
supply & fix Casing Wear Ring
supply & fix shaft sleeve
supply & fix Inter Stage Ring
supply & fix Ball bearing SKF 7310
supply & fix Ball bearing SKF 6310
supply & fix Bearing cartridge DE
supply & fix Bearing cartridge NDE
supply & fix shaft sleeve Nuts
supply & fix Split Gland
Supply and fix oil seal set
Supply and fix in Repair to bush cast alloy
Supply and fix in Repair to the main spindle shaft
Supply and fix in Repair to the key and impeller
Supply and fix in Repair/Replacement to the Existing coupling with tyre coupling including drilling required side of hole on either side.
Supply and fix in Replacement of terminal plate for electric motor.
Supply and fix in Repairing of Sleeve of the casing of the bearing & Repair of any major or minor defects
Repairs to vacuum pump of 50 LPM capacity Kirloskar Model No DV40 coupled with electric motor 3 PH 440V , 50Hz, 5.0 Hp capacity 1450 RPM after disconnecting the electric connections,transporting the pumpset to workshop and transporting the pumpset to workshop ,dismantling the pump set carefully from its connected electric motor including disconnecting and taking out the electric motor,transporting the pumpset to workshop for complete overhauling the pump set with the following replacement/repairs of pump set respectively all as specified and directed by Engineer-in-Charge. opening it through its casing For Dismantling pump and motor and carrying out repairs/overhauling including cleaning of casing and impeller, clogged, discharge line and oil chamber Greasing and oiling of all moving parts Refixing and recommissioning of pump with motor in proper alignments and recommissioning ,testing of pump set to the complete satisfaction of Engineer in charge. (Note:- Spares as required shall be measure & paid seperately against the relevant items).
supply and Fix in replacement Impeller
supply and Fix in replacement Gland Bush
supply and Fix in replacement Wearing Plate
supply and Fix in replacement Ball Bearing set
supply and Fix in replacement Stuffing box cover
supply and Fix in replacement Shaft Sleeve DE & NDE
supply and Fix in replacement Shaft
Supply Only Semiconductor fuse 300 A, Make- L&T. (For soft starter pannel)
Material & Labour for Pumping out water and sediments from overhead resorvoir of capacity 1.50 lakh gallon situated at Technical area and Domestic area and carrying out cleaning complete after scraping out fallen paint funai, voids etc. by using mechanical scrappers brushes and cleaning with fresh water and applying lime / stable bleaching powder solution diluted in water drying for two hours washing out with clean water, cleaning the external area of the OH resorvoir including the walk way arround, by removing all the debries & clearing the bushes,vegetation/weeds/salvage/scrap around 50 metre radius of reservoir , Prepration of surfaces, Applying two coats of white wash inside the overhead resorvoir, and painting of inlet outlet pipe CI/DI/MS pipe at tank/sump at base,dome,pumpset & associated pipeline (suction & delivery) with synthetic enamel paint as directed by Engineer-In-Charge . etc and marking a portion of size not exceeding more than 1 Sq M with black syntetic enamel paint over a coat of primer and writing in white synthetic enamel paint the sump capacity,date of cleaning , due for cleaning etc.& painting all the valve chambers with apex paint & valves & valve covers with synthetic enamel paint and marking flow direction & area and area of supply etc complete all as specified and directed by Engineer-In- Charge.( Note :-The water inside shall be pumped out with the installed machinery in the pump house to the level it picks up air . Balance quantity shall be vacated by the contractor by providing pump of suitable capacity at his own arrangement the entire scope of item shall be carried out in period of 24 hours so that water supply of area shall not be affected for more than 24 hours)
All as per Sl. Item No.127 here in before but of Overhead reservoir of capacity 50000 gallons located at Raksha Nagar Area, complete all as specified and directed by Engineer-In- Charge
All as per Sl. Item No. 127 here in before but of Overhead reservoir located at Technical Area of capacity 2.5 Lakhs gallons capacity, complete all as specified and directed by Engineer-In- Charge
All as per Sl. Item No. 127 here in before but of Overhead reservoir located at Borgad adm Area of capacity 1.2 Lakhs litre capacity, complete all as specified and directed by Engineer-In- Charge
Material & Labour for Pumping out water and sediments from the semi underground sump of capacity 50000 gallon situated at technical area , Domestic area & raksha nagar respectively and carrying out cleaning complete after scraping out fallen paint funai, voids etc. by using mechanical scrappers brushes and cleaning with fresh water and applying lime / stable bleaching powder solution diluted in water drying for two hours washing out with clean water, cleaning the external area of the sump including the walk way arround by removing debries & clearing bushes ,vegetation/weeds around 50 metre radius of sump,Prepration of surfaces, Applying two coats of white wash inside the sump, and painting of inlet outlet pipe CI/DI/MS pipe at tank/sump at base,dome ,pumpset & associated pipeline with synthetic enamel paint as directed by Engineer-In-Charge .etc ,and marking a portion of size not exceeding more than 1 Sq M with black syntetic enamel paint over a coat of primer and writing in white synthetic enamel paint the sump capacity,date of cleaning , due for cleaning & painting all the valve chambers & valves and valve cover with synthetic enamel paint and marking flow direction area and area of supply etc. complete all as specified and directed by Engineer-In- Charge.( The water inside shall be pumped out with the installed machinery in the pump house to the level it picks up air . Balance quantity shall be vacated by the contractor by providing pump of suitable capacity at his own arrangement the entire scope of item shall be carried out in period of 24 hours so that water supply of area shall not be affected for more than 24 hours)
All as per Sl. Item No.131 here in before but of semi UG sump located at Borgad adm Area of capacity 2.5 Lakhs litre capacity, complete all as specified and directed by Engineer-In- Charge
All as per Sl. Item No. 131 here in before but of semi UG sump located at Borgad adm Area of capacity 4.9 Lakhs litre capacity, complete all as specified and directed by Engineer-In- Charge
Repairs to submersible electric motor 3 phase 440V , 50Hz, 3.0 Hp capacity after taking out (connecting pipes/cable and submersible pumpset) from existing dugwell located at domestic area/raksha nagar (240 feet deep) with help of crane ,transporting the pumpset to workshop opening electric motor ,removing the burnt winding of motor from stator cleaning the enamelled slots carefully rewinding the stator with best quality super enamelled copper winding wire insulated as per existing size and number of turns, varnishing the winding with best quality varnish heating the winding for dyness, and finding out the defects segregating the serviceable spare parts for reuse and including machine work, reassembling the pump set after successful repair and refixing to the existing position and testing complete all as specified and directed.Make Kirloskar. (Note:- Spares as required shall be measure & paid seperately against the relevant items).
supply & fix Spacer Sleeve
supply & fix Top Sleeve
supply & fix Lock Washer
supply & fix Thrust Washer
supply & fix Bearing Sleeve for Bowl
supply & fix Bearing Bush G.M. for Bowl
supply & fix Neck Ring (Wear Ring)
supply & fix Bearing Bush GM for I.P.
Supply and Fix bearings (Make SKF) of suitable size.
Replacement of main spindle shaft of suitable size
Replacement of bush cast alloy of suitable size.
Replacement of oil seal set complete
Replacement of main spindle shaft sleeve of suitable size.
Replacement of keys and multistage impellers of suitable size.
Replacement of MS coupling with chain coupling including drilling required side of hole on either side.
Replacement of terminal plate for electric motor.
scrapping down existin paint & painting two coats of synthetic enamel paint over one coat of red oxide
Material & Labour for Pumping out water and sediments from swimming pool of capacity 11.00 lakh litre situated near Technical area and carrying out cleaning complete after scraping out fallen paint funai, voids etc. by using mechanical scrappers brushes and cleaning with fresh water and applying lime / stable bleaching powder solution diluted in water drying for two hours washing out with clean water, cleaning the external area of the swimming pool& painting all the valve chambers with apex paint & valves & valve cover with synthetic enamel paint and marking flow direction area and area of supply etc and painting of inlet outlet pipe CI/DI/MS pipe at tank/sump at base,dome,pumpset & associated pipeline with synthetic enamel paint as directed ,complete all as specified and directed by Engineer-in-Charge.. ( Note :-The water inside shall be vacated by the contractor by providing pump of suitable capacity at his own arrangement the entire scope of item shall be carried out in period of 24 hours so that swimming pool can be bring back into operation within 24 hours)
All as per Sl. Item No.152 here in before but of Semi -UG sump of capacity 80000 litres located at swimming pool Area, complete all as specified and directed by Engineer-In- Charge
Pumping out continously raw sewage water & cleaning of underground raw sewage water well of size 4.87 mtr dia x 6.75 mtr deep by removing sludge and silt completely with the help of electric operated lift machine from the bottom of raw sewage water well scrapping out complete sludge from the side walls of sewage well with the help of wire brush. Stacking out complete sludge and silt at distance not exceeding 50 mtr from the pump house. Applying two coats of lime wash on side walls of sewage walls on interior & weather proof apex over primer on exterior surfaces of sewage wall and painting of inlet outlet pipe CI/DI/MS pipe at tank/sump at base,dome,pumpset & associated pipeline with synthetic enamel paint as directed by Engineer-In-Charge
Pumping out raw sewage water & Cleaning of Aeration tanks of size 9.15 mtr x 9.15 mtr x 4.50 mtr by removing sludge and silt completely with the help of electric operated lift machine from the bottom of aeration tank scrapping out complete sludge from side wall of Aeration tanks with help of wire brush stacking out complete sludge and slit at distance not exeeding 50 mtr from tank,and taking out sludge for further dispolal outsidde domestic area .Applying two coats of lime wash on side wall at interiour surfaces & weather proof apex over primer on exterior surfaces ,cleaning and clearing,bushes and vegetaion arround the tanks, painting of inlet outlet pipe CI/DI/MS pipe at tank/sump at base,dome,pumpset & associated pipeline with synthetic enamel paint all as specified and directed by Engineer-in-Charge .
Pumping out raw sewage water and Cleaning of final settling tank of size 11 mtr (dia) x 5 mtr deep by removing sludge and silt completely with the help of electric operated lift machine from the bottom of final settling tank . Scrapping out complete sludge from the side wall of final settling tank with the help of wire brush, stacking out complete sludge and silt at distance not exceeding 50 mtr from the sewage treatment plant. Applying two coats of lime wash on side walls interior surfaces & weather proof apex over primer on exterior surfaces of final settling tank, cleaning and clearing the bushes and vegetation around the area all as specified and directed by Engineer-in-Charge.
Pumping out raw sewage water & Cleaning of semi underground sludge sump by removing sludge and silt completely with suitable pump ,scrapping out complete sludge from the side wall of sump with the help of wire brush etc and cleaning with clear water. Removing and depositing the sludge and silt at distance not exceeding 100 mtr from sewage treatment plant.Applying two coats of lime wash on interier side of sump & weather proof apex over primer on exterior surfaces and painting of inlet outlet pipe CI/DI/MS pipe at tank/sump at base,dome,pumpset & associated pipeline(suction & Delivery) with synthetic enamel paint as directed by Engineer-In-Charge,cleaning the vegetation and bushes around the sump all as directed by Engineer-in-Charge.
Material & labour for taking down valve from existing location,transporting it to workshop ,opening it through its head ,making necessary servicing /repair to its gate ,machining /fabricating as per valve /replacement of gland , replacement steel spindle with brass spindle & brass check nuts for sluice valve of 300 mm size,painting with synthetic enamel paint,installing and testing valve at original location using new rubber gsket and new nut bolts & washers of SS-304 for leakage free & smooth operation ,complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.158 here in before but 250 mm size, complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.158 here in before but 150 mm size, complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.158 here in before but 100 mm size, complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.158 here in before but 80 mm size, complete all as specified and as directed by Engineer-In-Charge.
Dismantling and taking out old unserviceable CI sluice valve from existing position and Supply & Fix CI sluice valve ISI marked PN-1 confirming to IS14846 both ends flanged with stainless steel stem with high tensile gun metal parts, iron wheel head check nuts etc including jointing with rubber gaskets, nuts, bolts and washer of sizes 80 mm dia Make:Zoloto or Equivalent in BIR/SIR complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.163 here in before but of sizes 100 mm dia of Make:Zoloto or Equivalent in BIR/SIR ,complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.163 here in before but of sizes 150 mm dia of Make:Zoloto or Equivalent in BIR/SIR ,complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.163 here in before but of sizes 300 mm dia Art No 1079A of Make:Zoloto or Equivalent in BIR/SIR ,complete all as specified and as directed by Engineer-In-Charge.
Dismantling old unserviceable valve chamber & Material & Labour for construction of valve chamber of size 0.90x0.90x0.90 mtrs internal dimension complete of brick masonary of 23 cm thick in cement mortar 1:6 on PCC 1:4:8 foundation 75 mm thick using 40 mm graded stone aggregates & coping in PCC having wall thickness of 0.26 mtrs 1 :3:6 10 mm thick at the top of brick wall using 20 mm graded stone aggregates and 10 mm thick plastering in cement mortar 1:4 on exposed brick or concrete surfaces & MS cover of 3.15 mm thickness including 40 mm×40mm× 6 mm angle iron frame fixed with the same size of angle iron hold fast,handle with locking arrangement & two coats of synthetic enamel paint over one coat of red oxide primer on steel surface and two coats of white wash on plastered concrete surface ,complete all as specified and as directed by Engineer-In-Charge.
All as per Sl. Item No.167 here in before but of of size 1.20x1.20x1.20 mtrs internal dimension
Repairs to verticle type sewage handling pump set of Make :Kirloskar, Model No Dry/s type ,114 cu.m/hr discharge, and 25 HP capacity installed at sewage booster pump house ,dismantling the pump set carefully from its connected electric motor including disconnecting and taking out the electric motor,transporting the pumpset to workshop for complete overhauling the pump set with the following replacement/repairs of pump set respectively and Refixing and recommissioning of pump with motor in proper alignments and recommissioning ,testing of pump set to the complete satisfaction of Engineer in charge.
Supply and fix in repairs Gland Bush Split type
Supply and fix in repairs Impeller Nut
Supply & fix Ball bearing SKF of suitable size
supply & fix shaft sleeve gun metal
supply & fix Repair to bush cast alloy
Supply & fix Repair of Damaged oil seal
supply & fix Repair to the main spindle shaft
supply & fixRepair to the key and impeller
Repair/Replacement to the Existing coupling with tyre coupling including drilling required side of hole on either side
supply & fix in Replacement of terminal plate for electric motor
All as item No. 169 above but capacity 15 HP & discharge 106.00 Cu.M/Hr pump set.
Supply and fix in repairs Gland Bush Split type
Supply and fix in repairs Impeller Nut
Supply & fix Ball bearing SKF of suitable size
supply & fix shaft sleeve gun metal
supply & fix Repair to bush cast alloy
Supply & fix Repair of Damaged oil seal
supply & fix Repair to the main spindle shaft
supply & fix Repair to the key and impeller
Repair/Replacement to the Existing coupling with tyre coupling including drilling required side of hole on either side
supply & fix in Replacement of terminal plate for electric motor
Supply and Fix Swimming Pool plastic Water Overflow Grating Size 500 mm in width complete all as specified color and design as directed by Enginner-in-Charge
All as per Sl. Item No.191 here in before but of Size 375mm in width.
All as per Sl. Item No.191 here in before but of Size 300mm in width.
Supply and fix ioniser electrode made up of copper -silver alloy of size 10 mm dia and 150 mm long suitable for ionising chamber of size 350 mm dia & 300 mm height Make - Satya Sai Aqua Pura or Equivalent complete all as specified and as directed by Engineer-In-Charge.
Supply & Fix in repair pool pipe 2 inch dia PVC pipe for suction sweeper non toxic including necessary adaptor & fittings complete all as specified and as directed by Engineer in charge.
Material & Labour for repairing,servicing of existing diaphragm valve & replacing existing diaphram with new diaphram for 150 mm dia ,complete all as specified and as directed by Engineer-In-Charge
Material & Labour for laying MS pipe in repair of 150 mm dia Heavy grade (C Class) in trench/surface including necessary cutting,welding/fabrication work & including suitable size SS304 Nut bolts to connect MS flanges, complete all as specified and as directed by Engineer In Charge.
Supply and fix flange 150 mm dia 12 mm thick including welding work to joint with MS pipe 150 mm dia,Complete all as specified and as directed by Engineer in charge.
Supply only calcium hypochlorite 65% to 70% chlorine content in granular (calcium based granular disfenction for water treatment for swimming pool & drinking purpose packed in non returnable plastic drum of 45 kg complete, brand having pan india availability,acceptability & being manufactured in open market termed as traditional product.The brand/makes meeting technical requirement as per PS must have certified by all india institute of hygenic & public health.Test reports must indicate the sample has been drawn by all india institute of hygenic & public health.Contractor shall render purchase voucher & test reports against each lot of delivery Make:Chlor Sree Rayalseema /Declibac/Potter & watts,Complete all as specified & as directed by Engineer-In-charge.
Supply only Poly Aluminium Chloride-(PAC) coagulant containing approx 29% Al2O3 with basicity of approx 64 packed in 25 kg plastic bags, brand having pan india availability,acceptability & being manufactured in open market termed as traditional product.The brand/makes meeting technical requirement as per PS must have certified by all india institute of hygenic & public health.Test reports must indicate the sample has been drawn by all india institute of hygenic & public health.Contractor shall render purchase voucher & test reports against each lot of delivery Make: DECPAC-P of Declibac/Sree Rayalseema/ Potter & watts ,Complete all as specified & as directed by Engineer-In-charge.
Supply only copper sulphate in granular form for removing algae from pool water, complete all as specified and directed by Engineer-In -charge
Supply only SEETUL N-68 compressor lubricant oil confirming to IS:4578-1989 ,enclosed in sealed container(non returnable), (Volume of oil in container 210 litre at 29.5°C) manufactured by Hindustan Petroleum Corporation Ltd duly tested ,Complete all as specified & as directed by Engineer-In-Chage.
Supply only VG 320 gear oil of Make : Servo Veedol /suitable for worm type gear box complete all as specified & directed
Supply of Chlorine tablets contained in plastic cylindrical sealed disposable sanitiser refill for disinfection of drinking water with arrangement for controlled release of disinfectant in water, suitable for operation through recommended dosing system. Replacement indication: visual & weight variation Water contact orifice design: Sealed when dry, exposed upon immersion Operation type: Non contact, non inhalatory Cylinder dia: 2.5 inches ± 0.5 inches Cylinder height: Minimum 10.0 inches ± 0.5 inches Item Name: STEQUA 411 AE REFILL Make: Declibac or equivalent
Supply only poly ammonia chloride enclosed inside suitable container,Complete all as specified & as directed by Engineer-In-charge.
Supply only ferrous sulphate(FeSO4) enclosed inside suitable container,Complete all as specified & as directed by Engineer-In-charge.
Supply only caustic soda (NaOH) enclosed inside suitable container,Complete all as specified & as directed by Engineer-In-charge.
Supply only hydrochloric acid (HCL) enclosed inside suitable container,Complete all as specified & as directed by Engineer-In-charge.
Supply only PH paper,Complete all as specified & as directed by Engineer-In-charge.
Material & labour for maintenace of 6 KLD ETP loacatd at EPS section,11 BRD,greasing of rotating parts,pumps & motor,replacement of pump glands,fitting replacement MS nut/bolts with SS 316 nut,bolts & washer including making necessary repairs to the PCC platform/base ,painting of plant including all metalic structure, complete all as specified and as directed by Engneer-in-Charge.
Material & Labour for overhauling to non clogging pumpset Make :Grundfos Model SE1.75.100.150.2.52S.C.N.51D. Resulting head of the pump: 20.3 m, Type of impeller: S-TUBE ,Maximum particle size: 80 mm, Primary shaft seal: SIC-SIC, Secondary shaft seal: SIC-CARBON, Pump housing: Cast iron EN-GJL250,Impeller: Cast iron EN-GJL250, Motor: Cast iron EN-GJL250, Material: Whole pump in cast iron, Pump inlet: DN100, Pump outlet: DN100,Auto-coupling: 96090994,Inst vertical: 96308237,Base stand: 96102255, Maximum,current consumption: 29 A, Power input - P1: 17 kW, Rated power - P2: 15 kW, Mains frequency: 50 Hz,Start. method: star/delta installed at STP dry installation ,dismantling the pump set carefully with the help of crane from its connected electric motor including disconnecting and transporting the pumpset to workshop with following replacement/repairs of pump set respectively (a) opening it through its casing For Dismantling pump and motor and carrying out repairs/overhauling including cleaning of casing and impeller, clogged, discharge line and oil chamber (b) Taking out the electric motor overhauling ,warnishing of the same (c) Repairing of Sleeve of the bearing & Repair of any major or minor defects (c) Refixing and recommissioning of pump with motor in proper alignments and recommissioning and test run from authorised rep of company of company,testing the pump set to the complete satisfaction & all as specified & as directed by Engineer in charge.
Material & Labour for overhauling to non clogging Pumpset Make :Grundfos, Model SEV.80.100.22.4.50D Type of impeller: Super Vortex, Maximum particle size: 80 mm Primary shaft seal: SIC/SIC, Secondary shaft seal: CARBON/CERAMICS, Max. hydraulic efficiency: 50 %, Approvals on nameplate: EN12050-1,Curve tolerance: ISO 9906:2012 Grade 3B Materials: Pump housing: EN 1561 EN-GJL-200 Impeller: Cast Iron, Flange standard: DIN, Pump outlet: DN 100, Pressure stage: PN 10 Maximum installation depth: 20 m, Power input - P1: 2.9 kW, Rated power - P2: 2.2 kW, Main frequency: 50 Hz, Start. method: direct-on-line, Max starts per. hour: 20, Rated current: 6,0-6,0 A, Rated speed: 1445 rpm installed at STP dry installation ,dismantling the pump set carefully with the help of crane from its connected electric motor including disconnecting and transporting the pumpset to workshop with following replacement/repairs of pump set respectively (a) opening it through its casing For Dismantling pump and motor and carrying out repairs/overhauling including cleaning of casing and impeller, clogged, discharge line and oil chamber (b) Taking out the electric motor overhauling ,warnishing of the same (c) Repairing of Sleeve of the bearing & Repair of any major or minor defects (c) Refixing and recommissioning of pump with motor in proper alignments and recommissioning and test run from authorised rep of company of company,testing the pump set to the complete satisfaction & all as specified & as directed by Engineer in charge.
Material & Labour for disengaging motor from gear box,flexible coupling & turbine and blades from aeration tank ,complete Maintenance and Overhualing of surface aerator at STP complete greasing of movable parts,bearing, gear box,& associated SS-316 nut bolts and washers , Refixing and recommissioning of surface aerator with motor in proper alignments and recommissioning and test run from authorised rep of company of company and testing the pump set to the complete satisfaction & all as specified & as directed by Engineer in charge.
Material & labour for taking down existing flexible coupling from site and replacing it with new flexible coupling along with n SS-316 nut bolts and washers,complete all as specified and as directed by Engineer-In-Charge.
Material & labour for replacement of oil seal of type 90 x 70 x 12 ,complete all as specified and as directed by Engineer-In-Charge.
Material & labour for replacement of oil seal of type 75 x 55 x 12 ,complete all as specified and as directed by Engineer-In-Charge.
Supply & fix nylon brush of size 2" long for suction sweeper head,complete all as specified and as directed by Engineer-In-Charge.
Supply & Fix in repair Butterfly valve wafer type made up of SG iron,without Lugs,Lever operated,SG iron Disc,Nitrile /Rubber linning/Neoprene lining,Test pressure PN-10/PN-16 150 mm Art No 1078 of Make: Zoloto or Equivalent in kirloskar, complete all as specified and directede by Engineer-In-Charge.(Rates quoted are deemed to be included with cutting existing 150 mm MS/HDPE pipe to accomodate butterfly valve,inserting suitable flanges,rubber gaskets,nuts bolts,making necessary welding work & testing the pipeline for trouble free operation)
Supply and fix in repair cast iron foot valve 150 mm dia with flange end with replacement of existing foot valve.of make: L&T/Zoloto/BIR ,complete all as specified & as directed by Engineer-In-Charge
Material & Labour for new HDPE pipe of 150 mm dia suitable for 4 kg pressure mounted on suitable support and fixed inside existing back wash tank duly making hole of suitable size,& plastering after fixing inside tank ,white washing or colour washing to the disturbed surface of wall complete matching with the existing touch up Engineer-In-Charge.
M/s.NIKI ENTERPRISES
M/S MK Nair
MAHIMA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .