Extension of the LT (415V) overhead line up to the newly constructed GMO unit and PO unit at Chamatu under Magadh OCP, M-S area

Amount

Erection of metallic pole of length above 10mtr and upto 12 mtr in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required

Erection of angle Iron/channel iron cross arm on 3 wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as oer drawing) and painting with primer and finished paint as required.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Providing of 70 sq nim 4 coreisi marked, upto 1.1 kv grade Alluminium armouredcable for service 6 wire

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of size not exceeding 35 sqmm direct in ground including 9 excavation, sand cushioning, protective covering and refilling the trench etc. As required

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.400 A, 35 КА, ТРMCCB

Erection of cradle guard as required.

Supply of 6 SWG G.I wire

Erection of G.I wire no-6/8 SWG including binding etc.as required for cage cradle and crosslacing.

Total impact of GST for the purpose of CTC

M/S MAHI ELECTRICALS

SANJU ENTERPRISES