PROVN OF 10 X TOILET AND 10 X BATHROOM FOR 22 RAPID (S) SIG REGT (AREN) AND PROVN OF FENCING WITH VIEW CUTTER AT NEW KLP 522 ASC BN UNDER AGE B/R-IV AND AGE E/M-II OF GE (SOUTH) MEERUT CANTT

Amount

Surface dressing and site clearance n exc 15 cm deep incl site clearance in soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as specified and directed.

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface Complete all as specified and directed.

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

Material & labour for approved soil filling under the floors, spreading and leviling in layers n.exc 25 cm thick, well ramming including watering as required complete all as specified and directed.

Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete complete all as specified and directed.

M&L Form work to sides and soffits of beams lintels etc finished fair complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete complete all as specified and directed.

M&Lfor form work to the edge of concrete flat n. exc 200 mm thick complete all as specified and directed.

Supply & fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Supply & fix mild steel TMT bars 5 mm dia and over upto and including 10mm dia as in stirrups complete all as specified and directed.

M&L RCC M 25 design mix using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L RCC M 25 design mix using 20 mm graded stone aggregate as in Columns, pillars etc Complete all as specified and directed.

M&L RCC M 25 design mix using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed.

M&L for RCC M 25 design mix using 20 mm graded stone aggregate for roof slabs supported on walls, beams and the like complete all as specified and directed.

Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

Material & labour for brick work with fly ash bricks in CM 1;6 brick straight or curved on plain to any Radius in Half brick thick wall complete all as specified and directed.

Material & labour for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces,in CM(1:4) surface finished even and smooth without using extra cement complete all as specified and directed.

Material & labour for 5 mm thick plaster in CM 1:3 on ceiling surfaces, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L Non Skid ceramic (coloured) tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400 x 400 x 10mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match, laid over & including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

M & L for preparation of new plastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified & directed.

M& L for PCC padding 1:2:4 type B1(using 20 mm graded stone aggregate) average thickness 25mm,finished fair and even without using extra cement on roof surfaces complete all as specified and directed.

M&L for 20mm thick screed bed in cement mortar 1:4 as on roof surface complete all as specified and directed.

Material & labour for cleaning of plastered /concrete surfaces and applying priming coat using bituminous primer @ 0.30 Kg/Sqm. followed by evenly a tack coat @ 1.20 Kg/Sqm. using with 85/25 grade bitumen, over laid with 3mm thick APP modified polymeric water proofing membrane with non woven polyester reinforced of weight not less than 3.6 Kg/Sqm. unrolled and bonded to substance with side and end laps 75mm and 100mm as per manufacturer’s instructions and finished top of APP water proofing polymeric membrane with a coat of hot blown industrial bitumen 85/25 grade @ 1.20 Kg/Sqm and finally finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm complete all as specified and directed.

M&L For framed work as in door or gates of angle or other section with gusset plate, rails, braces confirming to Fe 410 W ( Gde E-250 quality- A ) Complete drill for fixing of steel sheeting or other covering. Doors etc to be prepare for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, rinning rails and guides) and hanging also fastening and fixing complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F SRW pipes 110mm bore single socketed in any length with rubber ring joint laid in floor complete all as specified and directed.

S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed.

Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed.

Supply & fix steel windows or ventilators fixed type including hold fast, complete all as specified & directed.

Supply & fix mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc complete all as specified and directed.

Supply & fix 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

S&F Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 20 mm pipe complete all as specified and directed.

S&F Gun -metal,globe or gate valves,with iron wheel head ,screwed both ends for iron pipe and fixed for 15 mm pipe complete all as specified and directed.

S & F soap dish MS approximate size 160mm x 160mm x 90mm fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed.

Supply & fix rotational moulded polyethylene water storage tanks 500 liters capacity, three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified & directed.

Supply & fix in PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix butt hinges, 100 mm long of stainless steel complete all as specified & directed.

Supply & fix in PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply & fix PVC ball valves, high pressure with polyethylene float and fly nut complete screwed for iron pipe 20mm bore complete all as specified & directed.

S&F vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including ‘P’ or ‘S’ trap lime concrete bedding and making complete all as specified and directed.

S & F Flush pipe of polyethylene or low or high density of PVC, 32 mm dia, for low level cistern Complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls including cowl complete all as specified and directed.

PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore Complete all as specified and directed.

S & F Bib tap Cast copper alloy fancy type with crutch of butterfly handles screwed down for iron pipe or for brass ferrule and fixed in 15 mm bore dia of pipe complete all as specified and directed.

Supply & fix vitreous china wash hand basin, white, flat back of size 550x400mm (excluding taps, waste chain and plug and porcelain stopper) but including brackets suitable for 15mm dia pipe complete all as specified & directed.

Supply and fixing PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fix pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S&F waste coupling of PTMT (half or full threaded) suitable for urinals (Minimum weight 32mm-45gms) complete all as specified and directed.

S&F urinal spreader complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills, Shelves and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2 complete all as specified and directed.

M&L Slat-glazed stoneware drain pipes 150 mm dia laid in trenches and jointed complete all as specified and directed.

M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 Complete all as specified and directed.

M&L PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed.

Construction of Septic tank including excavation, ordinary soil, foundation in PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vvent shaft and sludge chambers etc complete for 50 users complete all as specified drawing TD-309 sheet No 1/4 to 4/4 and as directed by Engineer-in-Charge.

Soakage well including excavation in ordinary soil, foundation in PCC1:3:6, wells of Hony combed and solid in M-25 concrete, including intercepting chamber, screen chamber brick work in CM, RCC cover slab in M-25 RR masonry/ filling with brick bats, complete of size 3.0m dia x 3.00m deep complete all as specifed in drawing No TD-217 Sheet No 1/7 to 7/7 and as directed by Engineer-in-Charge

M& L Cement concrete as in cover slabs (for manholes etc PCC 1:2:4 type B-1 (20 mm graded aggregate) set in cement mortar 1:6.including as per requirement of form work complete all as specified and directed

M&L in repair for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over and including 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed.

M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n exc 25 mm thick complete all as specified and directed.

S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, cills, coping, bed plates/blocks for hold fasts etc including necessary use & waste of form work complete all as specified and directed.

Excavating in post holes in soft and loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and all as specified and directed

S&F mild steel work as in posts and strut in fencing including cutting tops to shape as directed drilling holes notching for wire etc complete all as specified & direcgted.

Supply only mild steel in flat , screw bolts, round or square bars in available length confirming to Fe-410-W(Gde-E-250) complete all as specified & directed,

S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

Material and labour for precast reinforced cement concrete 1:2:4, type B1(using 20mm graded stone aggregate)as in fencing posts, straining or terminal posts, struts etc of any cross sectional area, with or without chamfered angles and flat, splayed, rounded or mitred tops all as specified and directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including new PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for One bell point/light point controlled by one, one way switch 05 / 06 Amps.

One exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed

One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed

Supply and fix switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fix socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps to 40 Amps 10kA and making connections complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed

Supply and fix LED lamp 10 watt complete all as specified and directed

Supply and fixing LED security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 10 sqmm 2 core armoured, PVC sheated with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply / laying and fixing 40 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading leveling andhar punning complete all as specified and directed.

M&L for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply and fixing exhaust fan 300mm, single phase 230V, 50 HZ RPM 1200mm with double ball bearing heavy duty copper winding including all fixing material complete all as specified and directed.

Supply & fixing of ceiling rose, 3 phase /PVC/polycarbonate isolated body complete all as specified & directed .

Supply and fix LED batten 20 watt aluminium housing integrated type complete with all accessories and fixing material all as specified and directed.

Supply and fixing LED tube light fitting 9/10 watt surface mounted, with extruded polycarbonate, integrated lamp & driver, with opal diffuser and decorative end plates, complete with acessories all as specified and directed.

Supply and fixing LED bulk head light fitting wall mounted with back lit LED 10 watt, IP-66, complete with all acessories all as specified and directed.

Jay Ambay Enterprises (BID ID -3083264)

AR Enterprises (BID ID -3083173)

Tayal Builders (BID ID -3081068)

Rajneesh Jain (BID ID -3082344)

NK CONSTRUCTION (BID ID -3076795)

M/S AGARWAL CONSTRUCTION CO. (BID ID -3082873)