CAD of LIS Kanchir in GP Kanair Tehsil Kandaghat District Solan HP Sub Head Construction of out lets and laying of HDPE pipe for distribution system

Amount

Excavation in foundation trenches etc. upto all depths in all classification of earth work such as pick work, jumper work, saturated soil including bailing of pumping out water, blasting soft/ hard rock or chiseling soft/ hard where blasting is prohibited. In all lifts including trimming and dressing of sides, levelling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking the useable and un-useable material/ soil separately and then returning the stacked soil in 15cm (fifteen centimeters) layers where required into plinths, sides of foundations etc. including consolidating of each deposited layer by ramming and watering and then desposing of all surplus excavated soil un- useable materials complete in all respect with in all leads & lifts as per direction of the Engineer-in-charge.

Excavation in drains and channel etc in earth work in all kinds of soil such as kankar, moorum shingles conglomerate saturated soil and decomposed soft and hard rock hard rock including dressing of sides and beds, disposing of excavated earth with all leads, lifts disposed earth to be levelled and neatly dressed and then returning the stacked soil into foundation and trenches etc. including ramming and consolidating the same whereever required with all leads, lifts and including jungle clearance and as per the direction of Engineer-in-charge.

Provding and laying cement concrete 1:4:8 (1 cement:4:sand :8graded stone agg. 40 mm nominal size) and curing complete exclunding the cost of form work in foundation and plinths including all leads & lifts complete in all respect as per direction of the Engineer-in-charge.

Providing and laying cement concrete 1:1.5:3 (1cement:1.5approved sand:3approved graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- including all leads & lifts complete in all respect as per direction of the Engineer-in-charge.

Foundation and plinth including entire carriage of material upto all leads and lifts.

Wall (any thickness but not less than 0.1m thickness) attached pillasters, buttresses plinth and string courses etc. from top to foundation level upto floor two level and as per the direction of Engineer-in-charge.including entire carriage of material upto all leads and lifts.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish. Including centring, shuttering strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling not exceeding 4mtrs and removal of the same for insitu reinforced concrete and plain concrete work in vertical surface such as wall of (any thickness) partition and the like including attached pillaster buttresses plinth and string courses and like. including all leads & lifts complete in all respect as per direction of the Engineer-in-charge.

Providing tor steel reinforcement for RCC work including bending, winding and placing in position complete upto floor two level. including all leads & lifts complete in all respect as per direction of the Engineer-in-charge.

Providing and fixing water opening gate including all leads & lifts complete in all respect as per direction of the Engineer-in-charge.

Laying & jointing HDPE (High Density Polyethyiene pipes) (PN-2.5) of various dia in trenches, refilling (Earth work in trenches to be measured and paid for separately) Material grade PE-80 including all leads & lifts complete in all respect as per direction of the Engineer-in-charge.

90mm dia PN-2.5 Grade PE-63

110mm dia PN-2.5 Grade PE-63

125mm dia PN-2.5 Grade PE-63

140mm dia PN-2.5 Grade PE-63

OM hardware

Des Raj

R.K.Manhotra