SPL REPAIR TO BLDG. NO P-208 (COOK HOUSE) AND PROVN OF DRAIN TO PREVENT LOGGING DURING RAIN OF FIELD WKSP AT NAMS

Amount

Taking down of Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frames) n. exc 1.5 Sqm each and removing from site.

S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & two coat of synthetic enamel paint over a coat of red oxide on wooden surface and cutting holes in frames of any type/wall and , complete all as specified and directed.

S & F 125 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hinge pin type C 21 complete all as specified and directed

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts stove enameled black, with bright bolt 12mm dia complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L for framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete (Fe 410-W (Gde-E-250) quality A) all as specified and directed.

M&L for two coats of synthetic enamel painting over a coat of pink primer to new wood or wooden based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel painting over a coat of red oxide to new steel or steel based surfaces of any description, over 10 cm width or girth, including preparation of surfaces complete all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface incl preparation of old steel surface width or girth exc 10cm all as specified and directed.

M&L for one coats of synthetic enamel paint on wooden surfaces of any description over 10cm width or girth including preparation of old surfaces complete all as specified and directed.

S&F Stainless steel wire cloth 0.18mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire with 8% nickle staples as directed by Engineer-in- Charge.

S&F for rotational moulded polythene 1000 litres water storage tanks cylindrical vertical with closed top hoisted and fixed in position inclusive 20 mm dia float valve with aluminium fitting all as specified and directed including old disconnecting and taking down complete all as specified and directed.

Demoltion of Brickwork or stone/boulder masonry including plaster, laid dry of any decripiton and in any position complete all as specified and directed.

M&L brickwork in CM 1:6 with sub class 'B' bricks, straight or curved on plan exc 6m mean radius complete all as specified and directed.

Description all as per item ser No 16.00 above here in but except bricks.

M&L for half brick work in cement mortar (1:4) straight or curved on plan ti any radius with locally available Sub Class 'B' old size best quality brficks all specified and directed.

Taking down cement plaster on stone/Brick wall etc including racking out of joints hacking for keys scrubbing down with water all as directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair face of brick or concrete surface finished even and fair all as specified and directed.(WPC shall be measuared seperatly 200ML for 50kg cement bags or as per manufacturer's instructions).

Supply only liquid WPC complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified and directed.

M&L, rendering 10mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement , complete all as specified and directed.

M&L preparation of new plastered surface applying one coat of primer and two coat of cement base paint complete all as specified and directed

M&L preparation of new plastered surface applying one coat of primer and two coat of oil bound distemper complete all as specified and directed

M&L Prepration of new plastered surface applying 3 coat of white wash on ceiling complete all as specified and directed

M&L for applying one coat of white wash on walls, pillars cornices surfaces etc incl preparation of old plastered surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds etc, & filling necessary putty where required as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M&L for applying one coats of oil bound distemper incl preparation of old surface by electrical operated grinder etc, incl necessary minor repair of wall by putty complete all as specified and directed.

M&L for applying one coats of cement base paints on walls etc,incl preparation of old surface complete all as specified and directed.

M&L for Virified Ceramic tiles light/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm , in floors, on vertical surfaces of wall etc. set and jointed in neat cement slurry over 15 mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes and pointed in white or coloured cement to match and incl dismantling / demolition and rubbish off the primises etc complete all as speciefied and directed.

M&L for non skid ceramic any coloured/printed tiles 7 to 8 mm thick (square/rectangular ) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor of shade & designed as approved by GE,set and jointed in neat cement slurry and pointed with white cement with colour pigment to match the colour of tiles,over15 mm thick rendering as screed bed in cement mortar (1:4) in floors, incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.

S&F Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0. 11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:4.

M&L for glazed ceramic coloured/printed / dark tiles of size exc 0.06Sqm but n.exc 0.16 Sqm on vertical surface in skirting /dado etc, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, 10 mm thick rendering on fair faces of concrete surface of verticle in CM (1:3) finished even and smooth without using extra cement complete, shade & design as approved by EIC/GE, incl dismantling and rubbish off the primises etc all as specified and directed.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl rounding of edgeing complete all as specified and directed.

M&L 20 to -25 mm thick kota stone slab machine cut in floor over screed bed in 15mm thick in cement morter 1:6 and jointed with grey cement slurry including rubbing and mirror polishing including bulnoshing in steps all as directed by Engr-in-Charge.

M&L Polishing cutting, gridding and cleaning to existing Kota stone floor and removing of all impurities and making cleain all entire satisfaction of Engineer in Charge.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws and incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.

S&F mild steelwork in tubular trusses including special shaped washer etc. compleated using ERW induction butt welded tubes confriming to IS 1161-1779 grade St-240 including dismanteling of old truss etc compleate all as specified and directed.

M&L in repair for PVC hollow wall panelling 7 to 8mm thick any colour/design approved by engr-in-charge, inclusive of fixing on to wall incl moulding end caps fixed with PVC sleeves,screws as required at site & dismantling complete all as specified and directed

M&L for anodised aluminium framed work for door, window / vent (powder coated) aluminium section weighting 0.55kg/RM with one or more rebated incl jointed cleat for fixing etc complete all as specied and directed

M&L for anodised aluminium powder coated door, window and ventilator shutters, aluminium section weighting 0.55kg/RM fixed type without sash bar, incl necessary 4.8mm th sheet glass ordinary quality & glazing / black or PVC sheet joining with cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, lock , 2 Nos aluminium handles 150mm, 3 x hinges, 2 x Aluminium tower bolts 150mm with each shutter any type complete all as specified all as specified.

M&L for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (i) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (ii) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (iii) MS Tower bolt 150mm long - 2 No per leaf (iv) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (v) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (vi) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf . (vii) 10 mm square guard bar, 10 cm centre to centre. (viii) 25x4 mm flat iron all around for joint of both frame. (ix) stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples & 3mm thick, sheet glass ordinary quality and glazing with oil putty .(x) Two coat of synthetic enamel paint to MS window and guard bar. Note : Incl taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 incl hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.

S & F for steel sink with drain board size( 915x460mm & bowl size 410x 330x160 mm) with plug washer and waste coupling, waste pipe incl fixing cantilever brackets and connecting union to pipe over all complete all as specified and directed.

M&L for green marble 15-17 mm thick over cement screed bed laid on 10 mm thick CM 1:3 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps, riser incl rubbing and polishing incl moulding rounding to edge of marble & dismantling complete all as specified and directed.

M & L for chequered tiles of size 300 x 300 x 25 mm thick (colour and glazed approved by EIC) with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantling complete all as specified and directed.

M&L 25mm thick Cement concrete type B-1, 1:2:4 (12.5mm graded aggregate) including prepration of old surface, scraping ,washing, boorming, chipping etc complete all as specified and direct by Engineer-in -charge.

M & L for applying two coat of undiluted thick coat of acrlic reinforcement liquid applied elastorneric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Every each coat gap between 6 hrs) complete all as specified and directed by Engr -in-charge, Make : Asian paint, Sika, Fosroc etc..

M&L cement concrete type D2 1:4:8 using 40 mm graded stone aggregate, sub-base etc complete all as specified and directed by Engineer-in -charge.

S&F in repair 3mm thick figured glass pin headed type and glazing with oil putty in Sqm n.exc 0.50 each pan complete all as specified and directed.

S&F for 2nd class hard wood glazed and skelton door shutters 35mm thick, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR part-I clause 8.24(a) and fitted to chowkahts fixed with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with wire staples or wooden beads and two coat of synthetic enamel paint over a coat of red oxide on wooden surface & cutting holes in frames of any type/wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors and wall complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius diminishing pieces or trapers (larger bore measured) complete all as specified and directed.

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75/100mm complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal 110mm dia with access door

S&F harrison rails Aluminum Curtain Rails coller powder coated 25mm size with brackets including screws fixing of walls complete all specified and directed.

S&F for 15 mm bor GI tube medium grade freed to wall or under floor incl taking up or down old tube complete including cutting closes and make good in CM 1:3 complete all as specified and directed.

S& F in repair 20 mm bore G.I tubing in new or old location (wall/Roof) with all fittings incl taking up or down old tube complete all as specified and directed.

S & F for plain gypsum board panel 12.5mm thick on ceiling with and incl necessary GI frame used with 'T' or any section accessories etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqm incl dismantling of walls and ceiling board any type and two coat of OBD over a coat of putty complete all as specified and .directed.

S&F in repair Bib tap CP fancy type/long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed.

S&F Angle cock CP fancy type 15 mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed.

S&F swan neck pillar cock for 15mm bore pipe chromium plated fancy type screw with iron pipe incl all fittings complete all as specified and directed .

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair vitreous china ware over counter ovel wash hand basin, any colour, size 570 x 450 mm size with leg including cutting for and pinning ends of brackets or erecting stand including fixing waste pipe , CP waste coupling & bottle trap all as specified and approved by Enger-in-Charge.

S&F in repair 18/19 mm prelaminated particle board, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/steel frame work (inl 2 Nos 100 mm aluminium handles, 1 no 100 mm hasp & staples for each shutter) complete all as specified and directed.

M & L for repair to RCC Chajjas, roof projection edges, hanging part of chajjas, edges of chajjas, RCC papafeets, under the roof / floor slabs with PCC 1:2:4 (using 12.5mm crushed graded agg) incl neccasary renforcement 8mm to 12mm TMT bars, form work, MS wire mesh for bounding the concrete on ground required and plaster work in CM 1:3 & periodical services to match with the existing surfaces finishing at any height of buildings etc completed all as specified and directed by Engr-in-Charge.

S&F, floor doouble door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete as specified and directed by Engineer-in -charge.

M&L for Cement concrete in surface channels and drains type C-2 1:3:6 using 40 mm crushed stone aggregate complete as specified and directed by Engineer-in -charge.

M&L for Brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete as specified and directed by Engineer-in -charge.

M & L cement concrete as in coping type B1 1:2:4(using 20 mm crushed stone aggregate) rounded or chamfered on edges as directed.

M & L for Plastering 15 mm thick on fair face of brick work in cement mortar 1:4 finished even and smooth using extra cement complete as specified and directed by Engineer-in -charge.

M & L for Providing Reinforced Cement Concrete (1:1.5:3) type A1 using 20 mm graded aggregate as in Slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Pre-Cast reinforced cement concrete 1:2:4 type B-1 with using 20 mm graded stone aggregates as in cover slabs (for manholes etc)chullah hoods, chajas, water troughs, mangers, shelves and similar articles with plan faces set in cement mortar (1:4) including necessary use and waste form work etc complete all as specified and directed by Engineer-in -charge. Note - Reinforcement shall be measured and paid separetly

M&L mild steel TMT bars 10mm dia and over cut to length bent to shape required & cranking, binding, spirally for hopping for hooking ends & binding with MS steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, la ndings and similar work; not exceeding 200 mm thick (Horizontal or slopping) for rough finished flat surfaces of concrete all as specified and directed

M&L for stone sett flooring with stone settsof size 200 to 250mm long 150 to 200mm wide and 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 5% weight of cement and stuck flush including dismantling old stone complete all as specified and directed by Engineer-in -charge.

Fixing only stone sett flooring with stone settsof size 200 to 250mm long 150 to 200mm wide and 150mm deep and side dressed bedded in cement motar 1:3 joint 20mm thick grouted in cement motar 1:2 with an admixture of matalic floor hardner 5% weight of cement and stuck flush including dismantling old stone complete all as specified and directed by Engineer-in -charge.

M&L for reinforced concrete pipe class NP- 2, 300mm dia with coller laid and jointed with CM 1:3 complete all as specified and directed by Engineer-in -charge.

M&L for Concrete bed to drain pipes 300mm dia including packing under, and haunching with cement concrete 1:3:6 type C-2 against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 complete all as specified and directed by Engineer-in -charge.

Taking down carefully the existing aluminium/Copper point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed/ fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

One light point/Bell/Fan point controlled by one switch.

One 3 pin 5 amps switch socket on independent board.

One 3 pin 5 amps switch socket on same board.

All as per item No 81.00 herein before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wirte PVC insulated 2.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 81.00 & 82.00 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads.

Supply and fix switch piano one way 5 A, SP, 230 Volts complete all as specified and directed

Supply and fix of Switch 16 Amps Flush type complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 5 pin suitable for 5 Amperes flush type, 230 volts AC complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 6 pin suitable for 15 Amperes flush type, 230 volts AC complete all as specified and directed.

Supply and fix stepped type electronic fan regulator flush type all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x32mm complete all as specified

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant/batten fittings including LED bulb 9 Watt, 230 Volt complete all as specified and directed

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified.

Supply and fix wall/ceiling mounting LED 18 Watt PC Diffuser tube light fitting complet with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete all as specified and directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including 1 run of 6 sq mm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring . Note : 2 Run of 6 sqmm, 1 Run of 6 sq mm and 1 run of PVC conduit will be mesuared as 1 unit.

S & F in repair MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

Supply and fix in replacement of square/round shaped recess mounted LED Flat panel down lighter, 15 watt, suitable for existing POP celing complete with all fixing accessories and including connecting up to ceiling rose with 0.5 sq.mm three core copper flexible conductor cable including dismantling / taking down unserviceable fitting any type complete all as specified and as directed.

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F in repair MCB single pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

Earthing complete with GI earth plate electrode of size 60 x 60 x 0.6 cms burried directly in ground vertically at a depth of not less than 2.25 Mtrs below normal ground level with top edge of the earth plate at a depth not less than 1.5 Mtr below normal ground level surrounded from all sides by 15 cms thick and packed layer of charcoal dust and common salt filling in alter nate layers etc and connected to and including GI earth striq size 25X4mm upto 7.5 mtr by means of bolts, nuts, checknuts and washers made out of galvanised iron and protected by light grade 15 mm dia 5 mtr long and connected to main control panel and GI pipe 20 mm medium grade as watering pipe including funnel, wire mesh, PCC Pit made up of PCC 1:2:4 type C2 and RCC cover 40 mm thick with 8 mm bar 15 c/c including excavation and earth work all as specified in SSR Part 1 2009.

M&L for road cutting including excavation and getting out, returing filling in spreading levelling and well ramming in layers, soling with broker builders or quarried stone, inter stices filled, 7.5 cm thick (compacted thickness ) WBM(water bound macadam) with coarse aggregate retreived from road cutting consolidated to required gradient and camber, including Applying evenly a priming /tack coat with bituminous primer and making surface even and getting our surplus soil complete all as specified and directed.

Supply and fixing /laying galvanised pipe 50 mm bore medium grade fixed to pole with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed.

Supply and fix in replacement of security light fitting LED 36 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed.

S& F GI bracket light grade GI Pipe 1.2 mtr Length shape in any for fixing of street light fitting 36/40 Watt including clamps, nuts, bolts and was hess etc and painting with aluminium paint all as specified and directed.

S&F MCCB Incomer distribution board double door vertical type made out of CRCA MS sheet surface with insulated material like polyester or with epoxy powder coating surface mounting TPN 4 way, 415 volts with copper bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB and IP 43 - IK 09 protection with and incl 160 amp 36 kA 4 pole MCCB with thermal - magnetic setting and Icu = Ics = 100%

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 sqmm 4core with cable gland including taking down old unserviceble cable complete all as specified and directed by Engineer-in-Charge.Make Havells, Glostar & polycab.

Excavation in trenches in any type of soil n.exc. 1.5 mtr wide and n.exc 1.5 mtr in depth all as specified & directed.

Returning, filling in, any type of soil and spreading in layers n. exc 25cm thick each layer including watering & well ramming complete all as specified& directed.

Removal of surplus soil to a distance n.exc 50 mtr & depositing where directed at a level n. exc. 1.5mtr above the starting point complete all as specified & directed.

Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polyethylene (HDPE) with all accessories i.e. all type of joints,sockets,elbows,bends and end cap etc. of size 75 mm outer dia and 61 mm inner dia complete all as specified and directed. Make :- Telerex/Tirupati or E-in- C approved make

Santokh Singh and Associates

M/s MAHAJAN CONSTRUCTION CO.

tarlok singh contractor

Roop Sons and Co

Jaspal Construction Co.