Repair and Maintenance of 4 Nos of Type B Residential Quaters at Saryu Nahar Colony Gorakhpur

Amount

Laying R.C.C. 1:1.5:3 with 10 mm to 20 mm size Dalla grit and Kanahar sand not less than 2.2 F.M. including cost of all material labour and T&P etc. required for proper completion of work.

Cutting, bending, binding and placing in position of steel reinforcement including cost of all material labour and T&P etc. required for proper completion of work.

First class brick work in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

Dismantling cement concrete or brick or granolithic floor including base concrete and including stacking of dismantled materials as directed by the Engineer-in- charge within a distance of 60M.

Dismantling of old existing damaged plaster including disposal of malba within 60 memer as per direction of Engineer-in-charge complete in all respect.

10mm cement plaster in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

15mm cement plaster in 1:4 cement and chopan sand mortar including cost of all material labour and T&P etc. required for proper completion of work.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering two coat of oil bound distemper of approved make of Berger, Johnson & nicholsen, Shalimar, Asian, Nerolac over one primimg coat on cement primer on new surface after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even with plaster of paris and sand papered smooth including cost of all material, labour , T&P etc. required for proper completion of work.

P/Laying 6 mm thick china glazed wall tiles with 1:3 cement mortar with polishing as per direction of Engineer-in-charge complete in all respect.

Supplying and fixing masquito proof jali having 5 mess in each cm of 24 gauge.

P/F fly proof galvanized M.S. wire gauge to doors with avg width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete

Supplying and fixing 40 mm thick commercial quality flush door complete in all respect.

Painting two coat of synthetic enamel paint on old steel surface with superior quality approved make including cost of all material, labour , T&P etc. required for proper completion of work.

Painting one coat of wooden primer on new wooden surface including thoroughly cleaning of dirty and other foreign matter and sand papering and making smooth surface including cost of all material, labour , T&P etc. required for proper completion of work.

Painting two coat of superior quality of synthetic enamel paint on new wooden surface approved make on new wooden surface (excluding cost of primer) including cost of all material, labour , T&P etc. required for proper completion of work.

Painting two coat of superior quality of synthetic enamel paint on old wooden surface approved make on new wooden surface (excluding cost of primer) including cost of all material, labour , T&P etc. required for proper completion of work.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. squareTube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge.

Providing and fixing door shutters in existing door frames with 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).

P/F 40 mm dia concealed galvanised mild steel tubes (medium grade) I.S. 1239 (Part-1) complete with fitting and clamps, including cutting and making good the surface or wall etc. complete in all respect. (internal works).

P/F 32 mm dia concealed galvanised mild steel tubes (medium grade) I.S. 1239 (Part-1) complete with fitting and clamps, including cutting and making good the surface or wall etc. complete in all respect. (internal works).

P/F 20 mm dia concealed galvanised mild steel tubes (medium grade) I.S. 1239 (Part-1) complete with fitting and clamps, including cutting and making good the surface or wall etc. complete in all respect. (internal works).

P/F sand cast iron socket & spigot soil, waste, drainage and ventilating pipes (lead chaulked joints to be measure & paid seprately) complete in all respect. (a) 100 mm dia.

Providing to lead chaulked joints to cast iron soil, waste, drainage and ventilating pipes and fittings including testing of joints complete in all respect. (a) 100 mm dia.

P/F cromium plated fittings with all materials as per direction of engineer-in-charge complete in all respect. (a) 15 mm dia concealed stop cock.

(b) 15 mm dia bib cock.

(c) 15 mm dia angle valve.

(d) 15 mm dia pillar cock.

(e) 600 x 20 mm wall rail with bracket.

(f) Soap dish with bracket.

(g) 100 mm dia jali for nahani trap.

(h) 32 mm dia brass waste for basin.

(i) 100 mm dia shower rose.

P/F 450 mm x 15 mm nominal PVC connection pipe as per direction of engineer-in-charge complete in all respect.

P/F PVC waste pipe for basin as per direction of engineer-in-charge complete in all respect.

P/F Indian type white glazed earthenware 1st quality ISI marked Orrisa pan of size 580 mm Indian of approved quality including cost of all material complete in all respect.

P/F 10 litters low level PVC cistern of approved make complete with all assecessories and fittings.

P/F 550 mm x 400 mm wash basin with holes for pillar tap with C.I. or M.S. bracket including cutting hole and making good the same but excluding fitting fittings.

P/F 600 x 400 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing and fixing sal wood door frames complete in all respecr as per direction of Engineer-in-charge.

Dismantling of old damaged existing wearing coat on roof including disposal of dismantled material within 60 meter as per direction of Engineer-in-charge complete in all respect.

Laying 25 mm thick wearing coat of R.C.C. 1:1.5:3 with 10 mm to 20 mm size Dalla grit and Kanahar sand not less than 2.2 F.M. and also with nominal reinforcement of 50mm x 50mm 10 MS gauge wire mess including cost of all material labour and T&P etc. required for proper completion of work.

Wiring point for light with 1.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire and piano type switch etc. complete in all respect.

Wiring point for fan (lightduty fan) with 1.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire and piano type switch etc. complete in all respect.

Wiring point for plug with 1.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire with piano type switch etc. complete in all respect.

Wiring point for power plug/H-P.M.V/sodium vapour lamp with 2.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire with 15A piano type switch etc. complete in all respect.

Wiring point for exhaust fan with 2.5 sq.mm PVC insulated single core cable in heavy gauge PVC conduit pipe concealed in the wall complete with 8 SWB G.I. earth continuity wire with 15A piano type switch etc. complete in all respect.

Providing and fixing door closer godrej or equivalent with necessary accessories and screws etc. complete.

DINSH SINGH