SPECIAL REPAIRS GULAB HEENA KUMUD AND KAMAL BUILDINGS ROBERT COMPLEX AT NOFRA UNDER GE NW NOFRA COLABA MUMBAI

Amount

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed.

Material and labour for coloured glazed rectified ceramic tiles, 300 X 450 X 7 to 8mm thick , (joint free) as in vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement match to existing surface ,over and including 10mm thick backing coat in CM (1:4), complete all as specified and directed.

Material and labour for Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.set laid in flooring with 15mm screed bed in cm 1:4 including levelling the floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Material and labour for coloured light shade vitrified tiles of size 600 x 600 mm, 9 to 10mm thick, laid in flooring, with & including 5mm thick adhesive of Ferrouscrete (FERRO-1122) / Fevimate XL- Pidilite / Gold star of Bal Endura or equivalant including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed.

Material and labour for coloured light shade vitrified tiles 9 to 10mm thick, superior quality, skirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, including dismentaling of existing floring complete all as specified and as directed Note : Skirting shall be flush with the walls.

Supply and fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, rivetting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel') complete all as specified and directed.

Supply and fix Table Top ceramic wash hand basin vitreous china oval shape It has a smooth finish and (Colour approved by GE) of size 610x460x150mm, make is Hindware fonte with including brass chromium plated waste coupling 32mm with long screwed and fly nuts ,incl 60 cm long,32mm dia PVC(flaxible) type waste pipe fixed as in repairs complete all as specified and directed. Cat part No 91043

Supply and fix white vitreous china ware wash down water closet pan (pedestal pattern) with matching plastic seat cover fixed in repairs complete all as specified and directed.

Supply and fix PVC low level flushing cistern with dual flushing system including brackets 5/10 litre capacity, with 32mm bore polythene flush pipe of sufficient lenght including internal fitting (valve less syphonic) etc. complete fixed as in repairs complete all as specified and directed. Make : Hindware, Cera, Jaquar

Supply and fix toilet paper holder Stain less steel of approved sample fixed in repairs complete all as specified and directed.

Supply and fix soap dish Stain less steel of approved sample fixed in repairs complete all as specified and directed.

Supply and fix PVC cabinet with openable shutter and mirror with size of 450mm x 350mm x 120mm with thickness of mirror not less than 2mm, fixed to wall in repairs complete all as specified and directed.

Supply and fix Stain less steel tubular towel rail 20mm dia 60cm long between flanges complete all as specified and directed.

Supply and fix Stainless steel towel ring dia 125mm approved make and pattern, fixed to walls with screws complete all as specified and directed.

Supply and fixdecorative corner glass shelf round 6mm thick ,200mm size with raling 25mm high in bath room ,fixed with "D' type bracket on wall of approved and petten complete all as specified and directed.

Supply and fix Jet Spray CP copper cast alloy fancy type having PVC tube 750mm long SS nut bolts at either ends complete all as specified and directed.

Demolition of cement concrete filling of any description in sunken portion and removing debris out side MD land complete all as specified and directed.

Demolition of cement concrete (PCC/RCC) in ground floors n exc 15 cm thickness (below or above ground floor) and removing debris out side MD land complete all as specified and directed.

Treatment of sunken floor slab compraises of the following specifications and all as specified :- (i) Material and labour for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 4omm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately) (ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately) (iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty. (iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.

(v) Material and labour for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be peasured and paid separately) (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)

Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is inclued in the rates quoted above. (vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint

Cutting holes in bricks or RCC walls exce half brick built in cement mortar including making good after inserting and setting spouts complete all as specified and directed.

Supply and fix GI pipe 50mm dia medium grade laid on sunken floor complete all as specified and directed.

Material and labour for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion complete all as specified and directed.

Material and labour Injection grouting in RCC slab shall be cast/laid to the slope as indicated in drawing. After RCC slab is laid, cured and fully set, water shall be ponded in the sunken slab portion as per specified ponding test. The location of seepage/leakage, if any, shall be identified and marked. The portion of the slab where leakage/seepage is observed shall be repaired with grouting at contractor's expose. The area of dripping/leakage shall be cleaned to expose the surface. Mark the spots for injection grouting. If leakage is through a crack, mark grouting points along the crack in a staggered manner. If the leakage is across the area mark grouting spots in a grid pattern. Drill grouting holes so as to neatly fit the injection packers. Drilling to be done at an angle of 45 to the plane of grouting surface. Fix PVC/MS nozzles in the low viscosity, polyurethane resin/epoxy grout using a grouting pump. Repeat the process after 1 or 2 days if the leakage continues at some point. allow to cure for 24 hours and seal the grouting holes appropriately using epoxy putty complete all as specified and directed.

Material and labour PCC 1:7:12 with brick agg as in lean concrete/filling concrete complete all as specified and as directed.

Material and labour CI floor trap with grating dia of outlet 100mm including jointing to waste pipe in cement concrete type B1(1:2:4) as in repairs complete all as specified and directed..

Material and labour CI floor trap with grating dia of outlet 75mm including jointing to waste pipe in cement concrete type B1(1:2:4) as in repairs complete all as specified and as directed.

Supply and fix low density polythy lene (LDPE) pipes 28mm dia of pressure rating 6 Kg /CM2 laid in walls/floors from WHB out let upto Nahani trap including required nos. of elbows/ fittings, and cutting chasing in, etc complete all as specified and as directed.

Supply and fix Kitchen sinks with drainage board made of stainless steel 1 mm thick (SS grade 304 AISI 18/8) IS embosed (IS : 13983) gloosy finish ktichen sink with plugs, washeres and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, as in repairs complete all as specified and directed.

Supply and fix 38mm dia PVC (flexible) waste pipe, 800mm long for Kitchen sink complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar an removal of debris out side MD land complete all as specified and directed.

Material and labour for brick work built in cement mortar 1:6 with sub class B bricks straight or curved on plan exc 6m mean radius complete all as specified and directed.

Material and labour brick work sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 complete all as specified and directed.

Material and labour Vitreous water closet (Squatting pan, Orissa pattern, size 580 x 440 white, with integral foot rests and 'P' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete fixed in repairs complete all as specified and directed..

Taking down chowkats exc 1.5sqm and n.exc 4 sqm each with shutters (without taking off shutters from the chowkats or frames) complete all as specified and directed.

All as per item No. 36 above but n.exc 1.5 sqm complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and not exc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed..

Supply and fix 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and fix 40mm thick factory made plain framed, panelled shutters (two panel), 2nd class HW rail and style, with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour 35mm thick 2nd Class Hard Wood as glazed and skelton shutters open rebated and prepared to receive glass, gauze etc, edges of forming plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters with sash bars all as specified in SSR Pt-I

Material and labour for factory made solid PVC moulded door shutter 28 to 30 mm thick with wood free EPS(Stiles) with 2,4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specication complete all as specified and directed.

Supply and fix Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing in existing opening including necessary hold fast and concerte all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material and labour for 18 to 20 mm thick granite work as in platformwork/vertical surfaces window cill & Jamb in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite complete all as specified and directed.

Supply and fix powder coated (50Micron minimum thickness) aluminum frame for door ,windows,ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats,glazing clips,rubber packing,anodised aluminum snap beading,screws, sliding rollers, Rubber gasket complete all as specified and directed. Note:a)Glazing shall be measured seperately. b) Item shall be paid as per weight of alluminium section.c)the rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc., as required which shall not be measured for arriving the weight.d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

Supply and fix aluminium powder coated Grill (DECO grill, DG 103 of7.5 mm thick of M/s ELESAR, M/S Royal Grill, M/S National Grill Associated Profiles & Aluminium Ltd.) fixed with suitable 'F' section(No. 8584)15.30 x 23.40 x 1.40mm(minimum), fabricated and riveted to aluminium windows/ventilator complete all as specified and directed.

Supply and fix hold fasts and similar small articles conforming to Fe 410-0or 310-3 complete all as specified and as directed.

Supply and fix 5.50 mm thick plain glass n exc 0.5 sqm in each pane fixed to aluminium windows and iron frame complete all as specified and directed.

Supply and fix 5.50 mm thick plain glass exc 0.5 sqm in each pane fixed to aluminium windows and iron frame complete all as specified and directed.

Supply and fix 4mm thick glass sheet ordinary quality frosted on one side, n exc 0.5Sqm in each pane,fixed to Aluminium windows complete all as specified and directed.

Supply and fix 100mm long butt hinges medium weight stainless steel with ISI mark complete all as specified and directed.

Supply and fix in repair 100mm long butt hinges medium weight stainless steel with ISI mark complete all as specified and directed.

Supply and fix 50mm long butt hinges medium weight stainless steel with ISI mark complete all as specified and directed.

Supply and fix Godrej night latch seven levers suitable for 35mm to 45mm thick doors in repairs complete all as specified and directed.

Supply and fix Aluminum alloy anodized Aldrop bolt 300mm long with hasp and staple and fixing bolts complete all as specified and directed.

Supply and fix Aluminum alloy anodized Aldrop bolt 300mm long with hasp and staple and fixing bolts in repairs complete all as specified and directed.

Supply and fix Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed.

Supply and fix in repairs Aluminum anodized barrel bolt bolt of extruded section 200mm longcomplete all as specified and directed.

All as per item No 59 above but 150mm long complete all as specified and directed.

All as per item No 59 above but fixed in repairs 150mm long complete all as specified and directed.

Supply and fix extruded aluminium alloy handle fabricated type anodized 125mm long complete all as specified and directed.

All as per item No 62 above but fixing in repair only complete all as specified and directed.

Supply and fix peep hole , Magic eye brass to entrance door shutter in repairscomplete all as specified and directed.

Supply and fix Door stopper metalic 90mm long PVC coating / covering with megnetic latch type arrrangement of make and pattern, approved by GE, fixed with screws on skirting and plate with spring arrangement fixed on door in repairs complete all as specified and directed.

Supply and fix 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and directed.

Supply and fix aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and directed.

Supply and fix alumunium powder coated brackets suitable for hanging 20mm dia rods in Wardrobs and Curtain in Shower Area fixed on stone/ walls with screws complete all as specified and directed.

Supply and fix aluminium anodized XPM jalli 24 gauge with 1.4mm average width of aperature, conforming to IS-665, fixed as in aluminium window shutters complete all as specified and directed.

Supply and fix aluminium anodized XPM jalli 24 gauge with 1.4mm average width of aperature, conforming to IS-665, fixed as in wooden window/door shutters as in repairs, complete all as specified and directed.

Dismantling boarding any description fixed in any position with screws complete all as specified and directed.

Supply and fix 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed with screws complete all as specified and directed.

Material and labour for 12mm thick prelaminated plywood ,exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination,fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing,fixed in repairs complete all as specified and directed.

Supply and fix 18mm thick pre laminated decorative plywood exterior grade-1 ( with BWR resin) with decorative face laminated on both face as in shutters of cupboard fixed with screws to timber frame work complete all as specified and directed. Note:- Teak wood lipping shall be measured and paid separetaly.

Supply and fix Megnetic latch of approved pattern and shape fixed with screws on wooden surfaces complete all as specified and directed.

Material and labour PCC 1:2:4 B1 (20mm graded aggregate) as in bed blocks, copings, benchings, railing, bends etc incl necessary form work complete all as specified and directed.

Taking down existing cement or cement lime plaster and preparation of surfaces of walls of any description incl racking out joints backing for scrubbing down with water and any height including necessary scaffolding and removing debris out side MD land complete all as specified and directed.

Material and labour Plastering in cement & sand mortar 1:4, 15mm thick on fair faces of brick work or concrete surfaces of walls finished fair and even any height including necessary scaffolding complete all as specified and directed.

Material and labour for rendering 5 mm thick cement plaster in brick or concrete surfaces in CM 1:3 as on ceiling finished even and smooth any height including necessary scaffolding complete all as specified and directed.

Material and labour for Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed.

Material and labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profliling etc complete all as specified and directed.

M&L rendering 20mm thick on other than fair face of brick work or concrete in two layer first is 15mm thick CM 1:4 and seconed 5mm thick cement mortar 1:4 mixed with water proofing powder 2% of weight cement or as per manufacturers instructions for any height including necessary scaffolding,taking down of existing plaster & removing outside of MD land complete all as specified and directed

Supply only integral water proofing compound (ISI marked).

Material and labour preparation of old plastered surfaces by complete removal of existing treatmentand applying two coat oil bound distemper on ceiling over a coat of alkaline resistent primer over and including a coat of putty to plumb the existing surface,any height including necessary scaffolding complete all as specified and directed.

Material and labour preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkaline resistent primer on ceiling any height including necessary scaffolding complete all as specified and directed.

Material and labour preparation of old plastered surfaces by complete removal of existing treatment and applying two coats oil bound distemper on wall over a coat of alkaline resistent primer over and including a coat of putty to plumb the existing surface complete all as specified and directed.

Material and labour preparation of new plastered surfaces and applying two coats oil bound distemper over a coat of alkaline resistent primer over and including one coat of putty/POP to plumb the existing surfacecomplete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed..

Material and labour for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Material and labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof complete all as specified and directed

Material and labour for preparing of old decorated surfaces of walls/ceiling washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers, applying two coats of acrylic latex base exterior grade (100%Acrylic)cutting, chasing the cracks at least mm deep by means of grinder/machine complete all as specified and directed.

Material and labour for preparing of old/new surfaces of walls/ceiling (of projected Cup boards) washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers and applying two coats of Rain coat manufactured by Dr Fixit of Piddilte Industries Ltd. (shade to match the existing paint) complete all as specified and directed.

Taking down Cast iron/AC pipe of any dia and size fixed on wall or floor including all fittings complete all as specified and directed.

Supply and fix 100 mm dia sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste. etc complete all as specified and directed.

Supply and fix 100 mm dia sand cast CI bend of any radius, jointed with neat cement paste complete all as specified and directed.

Supply and fix 100 mm dia sand cast CI branch piece single branch of any radius, and jointed with rubber ring joint complete all as specified and directed.

Supply and fix 100 mm dia sand cast CI branch piece double, of any radius and jointed with with rubber ring joint complete all as specified and directed.

Supply and fix 100mm dia cast iron cowls on roof complete all as specified and directed.

Supply and fix 150mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fix 150mm dia PVC (SWR) bends/ shoes any radius with rubber ring joint complete all as specified and directed.

Material and labour for cutting holes into or through cement concrete slab, chajjas etc superfical area exc 100 sqm cm but n exc 250 sq cm and making good the exisiting surface complete all as specified and directed.

Supply and fix Mild steel, plain, black sheet 0.80mm thick in wall cladding, to cover the surface cables etc., including, bending or turning up mitred angles etc to size and shape of a tray (exc 50cm but n exc 80cm width of tray) fixed with screws on wallscomplete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Material and labour for 20 mm thick granite work as in cooking platform & table top WHB in cement mortar (1:4) including bull nosing/ moulding on all exposed edges/sides and pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of granite complete all as specified and directed.

Supply and fix 75 mm dia sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste. etc complete all as specified and directed.

Supply and fix 75 mm dia sand cast CI bend of any radius, jointed with neat cement paste complete all as specified and directed.

Supply and fix 75 mm dia branch piece single branch of any radius, and jointed with neat cement pastecomplete all as specified and directed.

Supply and fix 75mm dia cast iron cowls on roof complete all as specified and directed.

Material and labour for 18 to 20 mm thick mirror polished kota stone work as in Partitions/ shelves as in Wardrobs, fixed in cement mortar (1:4) including cutting chasing in walls,bull nosing/ moulding on all exposed edges/sides and pointing in white cement (1:2) using marble dust with admixture of pigment to match with the shade of Kota stone complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

Material and labour for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution)@ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position thickness not exc 15cm and removal of debris outside MD land complete all as specified and directed.

Roughening/cleaning surfaces of roof/ top surface with wire brushing, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Material and labour for cement concrete 1:2:4 type B- 0 (12.5 mm graded stone aggegate) in roof padding concrete, kerbs or mud stops, rounded or chamfered on edges all around at the junction of parapet and the roof slab complete all as specified and directed.

Material and labour 10mm thick rendering in cement and sand mortar 1:4 on roof padding concrete surface for levelling course rounded or chamfered on edges, slopping mixed with water WPC @ 2% by weight of cement, finished even & smooth surface without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately.

Material and labour protecting the roof with water proofing coating(Dr. Fixit) complete as specified below complete all as specified and directed.: (a) Wire brush the surface to remove loose particles & laitance wash with clean water. (b) Complete crack filling & reinstate damaged portion shall be filled with polymer modified mortar as recommended. (c) Allow the repair surface to cure for 24 hours afterwards wet the surface to a SSD condition (d) Apply one coat of primer by brush and allow to dry for 4 hours (e) Apply one coat of water proofing coating over the primed surface by brush (f) on the wet primed surface overlay a open- woven fiber glass mesh min 40 GSM of size 2mm x 2mm and allow it to soak completely (g) Immediately there after apply the second coat with a roller to ensure complete coverage of the fibre mesh (h) Apply the 3rd coat after 6 to 8 hours, once the 2nd coat is dry Make : Crack filler : Dr. Fixit crack-X Paste, Dr. Fixit crack -X shrinkfree, Shaliseal CPM of M/S STP Ltd Prime Coating : Dr. Fixit Primeseal Water Proofing Coating : Dr. Fixit Newcoat, Waterseal concentrate of M/s Krishna Conchem Products, Shalicry 215 of M/s STP Ltd.

Demolition of reinforcement cement concrete as in roofs, floor (other than ground floor), beams, stair case, landing, chajja and other similar suspended work etc complete all as specified and as directed by Engr-in-Charge. Note: - (i) Contractor should take all safety precaution and ensure no damage to inside building structure with using required scaffolding. (ii) Removal of debris will be measured and paid seperately. (a) From First Floor up to and including Fourth Floor

Material and labour for Mild steel TMT bars 10mm dia & over, cut to length ,bent to shape required including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia.including necessary scaffolding complete all as specified and directed.

Material and labour for Mild steel TMT bars 6-8 mm dia & over, cut to length ,bent to shape required including cranking, bending , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia. including necessary scaffolding complete all as specified and directed.

Material and labour for Fusion bonded Epoxy coating to reinforcement TMT Bars of any dia complete all as specified and directed.

Material and labour for Building up the profile of structural members by using latex additives(MONOBOND) modified air cured mortar system (Polymer modified mortar) (1:5:15 = 1 monobond-5Cement-15 sand) -in damaged areas in 30mm thickness including leveling profiling complete all as specified and directed.

Material and labour for Clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material dirt etc, complete, applying two coats of alkaline rust converting primer FEOVERT confirming to ASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats and applying protective coating IPNET-RB complete all as specified and directed.

Material and labour for Providing and applying structural grade EPIBOND-21-LP prior to application of any type of mortar plaster confirming to ASTM-C-882-91 (Arizona Slant Shear Test) to ensure bond between old concrete and new concrete complete all as specified and directed.

Material and labour for reinforced cement conrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5 m span complete all as specified and directed.

Material and labour for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete all as specified and directed.

Supply and fix stainless steel kitchen baskets for storage of plates, cups, bottles etc., made out of stainless steel of grade SS 304 not less than 6 to 8 Kg each using square hollow tubes of size 12mm x 12mm x 1.25mm thick for framework as required and solid round bars / 26 guage thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws, fixed in repairs complete all as specified and directed. Note : Telescopy Channels shall be measured and paid under respective item

Supply and fix Telescopy Channels, powder coated with ball bearings, suitable for Sliding SS plate racks 60 cm long standard width; fixed over 2nd class HW rectangulr fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillet fixed on cuddapah stone with screws complete all as specified and directed.

Supply and fix Stainless steel handle fabricated type anodized 100mm long of approved design, shape and make fixed in repairs with nut screws & washers complete all as specified and directed.

Taking up or down GI tubing including accessories and connections of following size complete all as specified and directed.

(a) 50 mm bore

(b) 25 mm bore

(c) 20 mm bore

(d) 15 mm bore

Supply and fix Steel water tubing galvanised medium grade (ISI marked) of following size, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and directed.

(a) 50 mm bore

(b) 25 mm bore

(c) 20 mm bore

(d) 15 mm bore

Material and labour for taking down old unserviceable bib cock/stop cock/ shower rose/ mixer/angular stop cock, gate valves any type, any size complete all as specified and directed.

Material and labour for cutting chases for concealed water tubing and making good in cement mortar 1:3, girth of cutting n.exc 10cm, in brick walls complete all as specified and directed.

Material and labour for cutting holes into or through brick walls built in cement mortar and making good in cement concrete 1:2:4 type B1, superficial area of the cutting n.exc 150 sqcm complete all as specified and directed.

Supply and fix in clamps, straps, supports or stays for GI pipes, indluding bolts, if required, hooks (stay), heavy for large gates; hook and pintel hinges; large hasps and staples; chains; hand ade sliding bolts; clamps; hold fasts, will ties, hooks for hanging fans plain angle cleats for securing purlins to wood trusses or rafters, knee piece two way and three way straps, plates washers and similar small articles conforming to Fe 410-0 or Fe 310-0 including painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Supply and fix fancy type chromium plated brass Bib tap with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified and directed. Make: Jaquar Cat Part No : CON-047KN

Supply and fix in fancy concealed type stop valve with long shark and adjustable wall flange including union suitable for 15mm bore GI pipe complete all as specified and directed. Make: Jaquar Cat Part No : CON-083KN

Supply and fix over head shower rose with Rubit cleaning system with shower arm and flange suitable for 15mm bore GI tubing complete all as specified and directed. Make: Jaquar Cat Part No : OHS-1709

Supply and fix fancy type chromium plated brass mixer unit 3 in 1 with wall flange suitable for 15mm bore GI tubing with necessary fittings complete all as specified and directed. Make: Jaquar Cat Part No : FUS-29273UPR

Supply and fix fancy type chromium plated brass angular stop cock suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed. Make: Jaquar Cat Part No : CON-059KN

Supply and fix chromium plated brass(ABS body) jet spray with 1.5 mtr long flex tube in chrome finish including holder complete all as specified and directed.Make: Jaquar Cat Part No. ALD-565

Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and jet spray complete all as specified and directed. Make: Jaquar Cat Part No : FLR-5041N

Supply and fix fancy type chromium plated brass Bib tap with nozzle for washing mechine suitable for 15mm bore GI tubing with necessary fittings complete all as specified and directed. Make: Jaquar Cat Part No : CON-049NKN

Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified and directed.

(a) 50 mm bore

(b) 25 mm bore

(c) 20 mm bore

(d) 15 mm bore

Supply and fix in repair white rectangular PVC water storage tanks (Loft tank) of capacity 270 ltrs with complete fitting including fixing 03 Nos tank nipples of GI with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.(Make : Sintex)

Supply and fix in repair PVC profile suitable for PVC Loft tank of capacity 270 ltrs including fixing aluminium channel around the profile complete all as specified and directed.

Supply and fix framed brakets of angles, joist, channel, angle or tee sections fixed independently without connecting plates etc, cut to shape (cut to ordinary length i.e with in 20mm of the length indicated), drilled and countersunk for screws, including bending and welding as necessary, confirming to Fe 410-0 or Fe 310-0 for ladder complete all as specified and directed.

M&L Preparation of new surfaces of steel of any description, over 10 cm in width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zink crome primer complete all as specified and directed.

Making good, painted or distempered finish to match existing complete all as specified and directed.

Cutting holes into or through brick walls built in cement mortar and making good in cement concrete 1:3 or 1:2: 4 type B 1 as required, superficial area of the cutting n.exc 150 sqm complete all as specified and directed.

Supplying and fixing in repairs brass float valve of size 15 mm high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified and directed.

Supply and fix in repairs PVC tank in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings suitable up to 80mm bore GI pipe all as per existing requirements complete all as specified and directed.

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials for taking credit (credit of items should be made as per conditions separately) and making good disturbed surfaces of walls, floors complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC conduits, ISI marked with accessories concealed in wall/ceiling/truss etc with metallic ISI marked terminal boxes concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :- Make of wire- Finolex, Polycab, Havells Make of casing & capping- Preesfit, Precision

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch

(c) One exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

(f) One bell point controlled by one bell push 5 Amps.

(g) one light point controlled by two 2- way switches

Material and labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through & including PVC conduits of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with metallic ISI marked terminal boxes concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of wire- Finolex, Polycab, Havells Make of casing & capping- Preesfit, Precision

Supply and fix Modular Switch , 6Amp, One way, 1 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular Switch , 16Amp, One way, 1 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular Switch , 6Amp, 2 way, 1 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular type bell push , 6Amp, 1 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Bell electric AC 230Volt single pole musical type with ISI mark.

Supply and fix Modular type, electronic fan regulator ( 5 step ), 450 Watts, 230 volts, 2 module Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

Supply and fix Modular Socket oulet, 6 Amps, 2/3 pin combined 2 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular Socket oulet, 6/ 16 Amps, 2/3 pin combined 2 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular blank plate. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular white cover plate with Frame 1 Module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular white cover plate with Frame 2 Module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular white cover plate with Frame 3 Module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular white cover plate with Frame 4 Module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular white cover plate with Frame 6 Module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular white cover plate with Frame 8 Module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular white cover plate with Frame 12 Module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular metal flush box 1 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular metal flush box 2 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular metal flush box 3 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular metal flush box 4 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular metal flush box 6 module. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular metal flush box 8 module . Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix Modular metal flush box 12 module.Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma)

Supply and fix in repair baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 1x20 WH with accessories internally prewired and incl connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.. Make- Philips/ Jaquar/ Havells

Supply and fix baton intergrated LED channel 1x10 WH accessories internall prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete complete all as specified and directed. Make- Philips/ Jaquar/ Havells

Material and labour for Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and directed.

Supply and fix LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hz, Lumen 1450 AC supply. Make- Philips/ Jaquar/ Havells

Taking down MCB DB of any type, single phase including disconnection of all circuits complete with MCBs etc.

Supply and fix 12 way Double door type having protrection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make- Havells/ Philips/ Legrand

Supply and fix MCB SPN 63 Amps, 240 Volts, C Series . Make Legrand Model No 408620.

Supply and fix MCB SP 6-32 Amps, 240 Volts, C Series . Make Legrand Model No 408595

Supply and fix in repairs single phase sheet metal powder coated distribution board 4 way comprising with following:- Make- Havells/ Philips/ Legrand

Supply and fix MCB SPN 40 Amps, 240 Volts, C Series . Make Legrand Model No 408618.

Supply and fix in repairs sheet metal enclosure 2 way without bus bar with MCB , (a) Isolator DP 63 Amps Breaking capacity 10 KA. (C series) Make- Havells/ Philips/ Legrand

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces.

Supply and fix 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including including PVC conduits of suitable size not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4.0 sqmm (green colour) for earthing. Note : 2 runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4.0 Sqmm cable shall be measured as 1 Run. Make of wire- Finolex, Polycab, Havells Make of casing & capping- Preesfit, Precision

Supply and fix 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 6 Sqmm in and including including PVC conduits of suitable size not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 6.0 sqmm (green colour) for earthing. Note : 2 runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 6.0 Sqmm cable shall be measured as 1 Run. Make of wire- Finolex, Polycab, Havells Make of casing & capping- Preesfit, Precision

Supply and fix 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC conduits of suitable size not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note : 2 runs of 10 Sqmm cable, 1 run of PVC casing caping and 1 run of 10 Sqmm cable shall be measured as 1 Run. Make of wire- Finolex, Polycab, Havells Make of casing & capping- Preesfit, Precision

Taking down old UNSV water heater of any type / capacity from site.

Supply and fix , testing and commissioning of storage type water heater (geyser) vertical type of 06 Ltrs capacity , single phase, vertical type, Rust Resistant, ABS made with thermal cut off with power consumption 1500 watts, ISI marked, BEE 5 star rating including fixing on wall with chroumium plated screws & nut bolts connected to existing water and electric connection complete all as specified and directed. Make- Racold Pronto Neo / Bajaj/ Havells/ Venus/ Jaquar Note:- Taking down U/S geyser (one geyser per Qtr) of any capacity will be deposited in MES store yard

Supply and fix RCCB with MCB of 2 Pole, 10 Amps rating with sensitivity of 30 mA suitable for 240 Volts complete all as specified and directed. Make- Havells/ Philips/ Legrand

Supply and fix 15 Amps plug top, AC 230 volts, ISI marked.

Taking down ceiling/exhaust fan, sealing cable end, dismantling blades and removing fan and blades to MES E/M Store complete all as specified and directed.

Supply and fix Ceiling Fan of size 1200mm Sweep, ISI marked, BEE 5 Star rating and alongwith down rod fixed to ceiling and connecting up including provision of flexible 3 core copper cable & testing, smooth functioning at site complete all as specified and directed. Make-Orient/Syska/Crompton/Havells Note:- (a) 180 x Taking down U/S ceiling fan (5x C/fan per Qtr) of any capacity will be deposited in MES store yard.

Supply and fix Exhaust fan 230mm sweep, 1400 RPM metallic body with louvers AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces complete all as specified and directed. Make-Orient/Syska/Crompton/Havells/Usha Note:- (a) Taking down U/S E/Fan ( One E/ Fan per Qtr) of any capacity will be deposited in MES store yard

Supply and fix Rigid non-metallic PVC casing caping/conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of medium grade, ISI mark, 25mm width double lock, for cable TV, internet, telephone cable complete all as specified and directed. Make of casing & capping- Preesfit, Precision

Supply and fix modular single pole & neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amps complete with modular box & modular plate complete all as specified and directed. Make- Havells / Philips/ Legrand

Supply and fix telephone jack with pressed steel sunken box with 3 mm thick PVC top cover complete all as specified and directed. Make : Legrand(Arteor), Havells(Coral) , Anchor(Roma) Note for all items :- The work in certain bldgs is to be carried out in high storeyed buildings. The rates quoted shall be inclusive of necessary scaffolding and safety measures of labours engaged in the work as per latest labour laws & regulations

AGRAWAL ASSOCIATES

Sai construction & services

Ms Hari Deva Builders

Nexus Infratech

MUKESH CONSTRUCTION CO

Joy builders

Mahendra Realtors and Infrastructure Pvt Ltd