Installation of 500KVA, 3.3kV/440V Transformer with its primary control switchgear at Stock No. 10 and 630 KVA, 6.6kV/440V Transformer at Stock No. 21 for providing power to M/s Madhucon for CHP construction work under KDH OCP, NK Area

Amount

Providing and fixing of Push Button Switch

Providing and fixing of Indicating Lamp

Providing and fixing of Shunt trip Coil Assembly 110V DC

Providing and fixing Multi function Meter 96 x 96 mm

Providing and fixing of Closing Coil

Providing and fixing of Auxiliary Contactor

Providing and fixing of Rectifier Capacitor Unit

Providing and fixing of 24 Pin Plug & Socket Assembly

Providing and fixing of Potential Transformer Fuse 3.3kV, 3 Amp

Fixing / adjustment of Vacuum Bottle with providing all requirements.

Mechanical overhauling with changing of accessories like bush, connector, plug contact assembly (Latch) assembly.

Wiring with materials including PVC wires, lugs, ferrules etc.

Complete denting of switchgear with fabrication cable entry box, Front & Back side cover gate visible plastic glass fitting etc.

Providing and fixing of Copper terminal connector of size 60x8x250mm of assorter size and holes for connection to bushing stud and cable for incoming and outgoing connections.

Providing and fixing of control cable 1.1kV grade, 8 core x 2.5 sqmm

Providing and fixing of Earth Leakage Relay microprocesor based 110V-250V, AC-DC, 300 mA-30A Leakage current.

Providing and fixing of CBCT rectangular type of assorted size

Providing and fixing of Epoxy base CBCT fixing plates.

Painting of VCB Switch inside and outside with fixing of radium fluorescent tape depicting the name and Serial No., CT ratio at front and back of the switchgear and control panel.

Supply and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11KV grade as required. 120 Sqmm

Providing and fixing of GOAB Switch, 11kV, 800A

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11 KV overhead line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm MS flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts and nuts etc and painting with primer and finish paint as required.

Providing and fixing of copper Lugs, 120 sqmm

Providing and fixing of GI Nut, Bolts and washers 16mm x 25 mm

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtrs long etc etc. with charcoal and salt as required.

Providing and fixing of 16 Sqmm ISI marked, FRLS PVC insulated single core copper conductor cable

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 3.3 KV overhead lines with rated voltage 3 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanized clamping arrangement, G.I. bolts, nuts, washers etc as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required. Above 4.5 Metre and upto 6.00 Metre.

Total impact of GST for the purpose of CTC

KAMALA ENTERPRISES