Provn Of 02 KM CGI Sheet Fence

Angle Iron picket 3300mm (50 x 50 x 5mm) weight approx 12.54 Kg as per IS-808 : Re-affirmed 1999 (Amdt –I) Including welding, cutting, drilling hole, 150 mm long angle iron same sizes should be welded at bottom of the picket as a fastening . Each pickets to be placed at a distance of 2.80 M centre to centre. Picket shall be required 2 Nos of 12 mm dia hole below 1.00 mtr top of the picket for fixing of support picket. Pickets shall be painted a coat of red oxide primer complete all as per drawing & specified as per IS – 2721 – 2003. Make -TATA/ SAIL/ JINDAL. FOR : UDHAMPUR

Angle Iron picket 2400 MM long (50x 50 x 5mm) weight approx 9.12 Kg with cutting 05 Nos notches for fixing of barbed wire as per IS-808 : Re-affirmed 1999 (Amdt –I) including welding and cutting of notches etc complete. Long angle iron pickets to be placed at a distance of 3.0 M centre to centre. Pickets shall be painted a coat of red oxide primer complete all as per drawing & specified as per IS – 2721 – 2003. Make -TATA/ SAIL/ JINDAL. FOR : UDHAMPUR

Aangle Iron picket 1400 MM long (50x 50 x 5mm) weight approx 5.32 Kg with cutting 03 Nos notches for fixing of Punch tape as per IS-808 : Re-affirmed 1999 (Amdt –I) including welding and cutting of notches etc complete. Long angle iron pickets to be placed at a distance of 3.0 M centre to centre. Pickets shall be painted a coat of red oxide primer complete all as specified as per per drawing & specified as per IS – 2721 – 2003. Make -TATA/ SAIL/ JINDAL. FOR : UDHAMPUR

Angle Iron picket 2950mm long (50 x 50 x 5mm) weight approx 11.21 Kg as per IS-808 : Re-affirmed 1999 (Amdt –I) Including welding, cutting drilling hole,150mm long angle iron same sizes should be welded at bottom of the picket as a fastening. Angle iron pickets to be placed at a distance of every Third picket of the fencing for support and in a top portion of picket 75 mm long bend to be required with 2 Nos 12 mm dia hole for fixing support and main picket. Pickets shall be painted a coat of red oxide primer complete all as specified as per IS – 2721 – 2003. Make -TATA/ SAIL/ JINDAL. FOR : UDHAMPUR

Galvanized corrugated mild steel sheet of size 3.05 x 1.0 M, 0.63 mm thick with grade of zinc coating 275 gm/sqm. Make : SAIL/ TATA/ JINDAL FOR : UDHAMPUR

Punched tape concertina coil (including spike and handle) with 50 turns and dia 1050 mm, having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electro galvanised to provide protection against out door exposure. The punched tape is mechanjically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil, steel clips connect the individual width of barbed a 9 mm and spacing of clips 23.5mm to 24.5mm C/C. The weight of each coil will be 15.2 (+_5%) Kg without packing material and coil length 15 Mtr when opened up. Each coil wound with bituminised Hessian cloth for provideing protecdtive coasting as per specification NO IND/ENG/PROV/1245 is for raw material and drawing IMGA -0112/B (sheet 1 of2), IMBA-0112/C(sheet 2 of 2), IMPD-1817/B, IMPD-1820, IMPD-1821/B and IMPD-1822/B. FOR : UDHAMPUR

Barbed wire 2.24mm dia, length of minimum 450m long in 50Kgs per roll,Galvanized Barbed wire shall be of 2 strands conforming to IS 278-1978. It shall consist of 2 line wires of 2.24mm dia with dia of barbs 2mm at 75mm centre to centre. The barbs shall have a length not less than 13 mm and not more than 18 mm with sharp pointed edges. The line and point wires shall be circular in section, free from scales and other defects and shall be uniformly galvanized. The line wire shall not contain any welds and should be continuous. FOR : UDHAMPUR

Punched tape low carbon GI strip having sharp barbs on both sides at regular specified intervals. Fixing three rows for support concertina coil for 1st layer obstacle.The punched tape is mechanically crimped. The weight of each coil will be 2.6 (+_5%) Kg without packing material and punched tape length 50 Mtr when opened up. Each GI punched tape is supplied in plastic spools with packing of 50 mtrs length. FOR : UDHAMPUR

Self tapping screw 50 mm long with rubber washer. FOR : UDHAMPUR

GI Binding wire 0.9 mm dia FOR : UDHAMPUR

Nut and bolt 10mm dia 50 mm long with two steel washer. FOR : UDHAMPUR

Synthetic enamel paint, of BLACK colour Ist quality conforming to IS 2932-2003. Make - ASIAN PAINTS (APCOLITE BRAND)/ BERGER(LUXOL HI GLOSS) / GOODLASS NEROLAC (FULL GLOSS)/ SHALIMAR (SUPERLAC). FOR : UDHAMPUR

Thinner. Make: J&N / Asian / Berger/ Nerolac. FOR : UDHAMPUR

Paint brush 4". Make: Super Horse / Horse Gold / Horse 7 / Kirpal. FOR : UDHAMPUR

Paint brush 2". Make: Super Horse / Horse Gold / Horse 7 / Kirpal. FOR : UDHAMPUR

HDPE Sand bag Khaki (unroofed) item No W8/WA-8015-000196 and specification No Ind/TC 2028. FOR : UDHAMPUR

K C MECTEC

RIDHI SIDHI ENGINEERS

SANGEETA ENTERPRISES