Repair Work of All Doors and Windows (Re-Plastering) in the Premises of Jganabharathi-1, HIC-1585 in Bangalore South Taluk Under BCM Department Building/ 2225-00-103-0-40 Grant- Reserved for SC Category

Repair Work of All Doors and Windows (Re-Plastering) in the Premises of Jganabharathi-1, HIC-1585 in Bangalore South Taluk Under BCM Department Building/ 2225-00-103-0-40 Grant- Reserved for SC Category

Repairing door and window frames with available wood to the required size. ---- with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equipments including all incidental ...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

Providing & fixing glass panes with putty and glazing clips in steel

doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, usage charges...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost o...

Ceramic Glazed tiles minimum thickness 5mm in all colours shades and designs except burgundy, bottle green, black ---- with all lead, lift, loading, unloading, labour, fuel, hire charges of machinerie...

Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on...

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement:3 fine sand) including rounding off corners wherever require...

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including ne...

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with...

Providing and fixing bright finished brass handles with screws etc. complete: Brass handles 125 mm with plate 175x32 mm ---- with all lead, lift, loading, unloading, labour, fuel, hire charges of mach...

Providing and fixing Stainless Steel 304 grade soft closing spring

hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including maki...

Providing and fixing garwar 2.5mm thickness including loading & unloading lift, transportation, from partition, labour etc, Complete Providing and fixing of 1.5 mm thickness 30mm gap, material 2 years...