Operation of Boiler lifts OTIS Make and Operation Preventive Breakdown maintenance of Service Building TG Hall Lifts KONE Make and Chimney Lift of BTPS Anpara and A Rerubberisation Recasting of Cutless rubber lined bearing of CW Pumps BTPS An

Amount

PART-A : Operation and General up keep of Boiler Lift of Unit # 4,Unit #5 and & Chimney lift

Round the clock Operation and Routine maintenance of Boiler lift of Unit-4 (8:00 Hour shift basis Job) .As per scope of work.

Round the clock Operation of Boiler lift of Unit-5 ( 8:00 Hour shift basis Job) .As per scope of work.

Operation of goods lifts of Unit-4 / Unit- 5 on shift wise basis (during overhauling /break down of Unit /as and when require (8:00 Hour shift basis Job). As per scope of work. Note: Operation of Chimney lift as and when required by diverting Boiler lift operator without any extra job.

Operation, Routine Maintenance & General upkeep of Service Building & T.G Hall Lift (KONE Make)

Round the clock Operation and Routine maintenance of Kone make lift of T.G Hall of Unit #4 & # 5 ( 8:00 hour shift basis Job) as per scope of work.

Operation and Routine maintenance of Kone make lift of service building (north side & south side) from 08:00 hrs to 20:00 hrs. As per scope of work.

Operation and Routine maintenance of Kone make lift of service building, during VIP visit/Overhauling /breakdown of Units. 8:00 hours shift .as per scope of work.

PART-C (Painting & Polishing of Lifts)

Painting & Polishing of KONE / Otis make Lifts of Boiler / turbine / service building as per scope of work

PART-D Re-rubberisation and Re-casting of old cutless rubber lined bearing of CW Pump

Re-rubberisation of old and worn out cutless rubber lined bearing in bronze shell of Intermediate shaft of C.W. Pumps Material: Synthetic Nitrile Length of Bronze shell : 320 mm I.D. of Bronze shell : 184 mm ID of bearing after rubberisation: 160mm

Re-casting of old & damaged bronze shell and rubberisation of rubber lined bearing of Intermediate shaft of CW pump Material: - Bronze and synthetic Nitrile Length of Bronze shell : 320 mm O. D. of Bronze shell: 200 mm. I.D. of Bronze shell : 184 mm O.D. of flange of Bronze shell : 264 mm Thickness of flange of Bronze shell:14mm ( As per drawing)

PART-E Re-rubberisation of Hanger Roller of KONE Lift

Re-rubberisation of old and worn out Hanger Roller of KONE Lift Material: -Synthetic Rubber/Teflon O.D. of Hanger Roller with rubber: -85 mm Width of Hanger Roller: -19 mm

M/S R L ENGINEERING