REPAIR/MAINTENANCE OF CEILING FANS, WALL FAN, EXHAUST FANS AND GEYSER AT VSN, NAGPUR

Amount

M & L for disconnecting electric supply, taking down fan, dismantling blades carefully after unscrewing nuts and bolts of ceiling fan, wall fan, exhaust fan of any make from existing position and bringing to AGE E/M store yard for repairs, overhauling, oiling, greasing and cleaning all dusts and rehanging in position and connecting up electrically including minor items like split pins complete all as specified and as directed by EIC. Note: Complaint slip regarding the fan should be obtained from concerned JE (E/M) of AGE E/M office every day and completion on the complaint must be intimated to concerned JE (E/M) after rectification every day. Rewinding work and replacement of spares shall be measured and paid separately under appropriate items. No supporting materials, tools and plants shall be issued by MES to contractor complete all as specified and as directed.

Carrying out the following repairs to ceiling fan, Wall Mounted Fan of any make and testing complete of sizes given below: -

Rewinding to ceiling/wall fan motor assembly complete with super enameled copper winding wire of suitable gauge for 48 " (1200 mm ) sweep fan including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete all as specified and as directed.

S & replace ball bearing 6201/ 6202/ 6203 for 48 " (1200 mm ) sweep fan including taking down old unserviceable ball bearing complete all as specified and as directed. Make : TATA, SKF, NBC

M&L for painting to ceiling fans, of any make and of any sizes with two coats of synthetic enamel spray paint including blades, down rod complete including removing old paint by sand papers, dusting, cleaning including filling cavities with filler before applying paint and marking MES No in black paint. complete all as specified and as directed. Note: - Fan shall be painted by machine spray painting and not manually.

S & F capacitor 2.5 MFD, 240 Volts, including taking down old unserviceable complete all as specified and as directed. Make: - EPCOS, Havells, Philips,

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, complete all as specified and as directed. Make: - Legrand Cat No. 675531

S & F 0-4 step, two module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, complete all as specified and as directed. Make: - Legrand Cat No. 675532

Taking down unserviceable regulator and S& F 0-4 step-1, electronic fan regulatore flush type on the existing phenolic laminated sheety etc complete all as specified and as directed. Make: - Leader/Anchor/Crabtee

Carrying out following repairs to exhaust/wall fan PVC Body of any make and size given below and testing complete all as specified and as directed

Rewinding to exhaust fan motor assembly complete with super enamelled copper winding wire of suitable gauge including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete for following sizes: -

upto 12" (300 mm) sweep

S & replace Fan Blade PVC upto size suitable for 300 mm Ex fan as per sample.

S & replace exhaust fan motor metal body suitable for upto size 300 mm Ex fan PVC body.

Carrying out following repairs to exhaust fan Metal Body of any make and size given below and testing complete all as specified and as directed

Rewinding to exhaust fan motor assembly complete with super enameled copper winding wire of suitable gauge including varnishing, drying up, providing fresh clean lubricant oil/grease, reassembling and tesing etc complete for following sizes: -

upto 12" (305 mm) sweep

above 12" and upto 18" (457 mm) sweep

S & F Fan Blade Metal body including frame and legs suitable for upto size 300 mm Ex fan

S & F Fan Blade Metal body including frame and legs suitable for upto size 450 mm Ex fan

S & F exhaust fan motor metal body suitable for upto size 12" (305 mm Ex fan

S & F exhaust fan motor metal body suitable for upto size 18" (450 mm) Ex fan

Taking down exhaust fan for cleaning of heavy oil fumes deposited in exhaust fan both metal body or PVC body of size 150 mm to 450 mm with suitable chemical and refixing it back with suitable required nut, bolt etc. complete all as specified and as directed. Note: - Rates are deemed to be included of nut, bolt, chemical, disconnection and reconnection. Cleaning of exhaust fan will be done at AGE E/M store yard in front of detailed MES representive.

S & F 'D' clamp after cutting the ceiling of roof and binding with reinforcement and making good with cement reinforcement and finishing with matching with existing surfaces, including anchor bolt having four nuts and washers for hanging of ceiling fans complete all as specified and as directed.

S & F GI pipe 15 mm dia light grade including cutting, threading and making holes for the purpose of down rods to ceiling fans with making good by white/colour painting complete all as specified and as directed. Note: -Length of pipe as required in ground.

S & F 3 core, 1.5 Sq mm PVC round sheathed insulated flexible copper cable grade 1100 volts including taking down old unserviceable cable complete all as specified and as directed. Make of cable: - Polycab, Anchor, Finolex, HPL (white colour)

S & F 3 core, 2.5 Sq mm PVC round sheathed insulated flexible copper cable grade 1100 volts including taking down old unserviceable cable complete all as specified and as directed. Make of cable: - Polycab, Anchor, Finolex, HPL (white colour)

Taking down unserviceable water heater (Geyser) of size 25/35/50 Ltrs for checking of defects and repairs including disconnecting water connction by unscrewing/cutting the existing GI pipe, threading as necessary for new connection (including GI tubing in short lengths/fittings) and refixing after carrying out repairs and replacement of spares including connecting to wate supply, electric connection using suitable size multistranded copper cables and testing complete all as specified and as directed. Note: - Spares shall be measured and paid separately under relevent Sch 'A' items.

S & replace heating elements fo geysers of any type and any size including taking down the old unserviceable heating element for the following capacities complete all as specified and as directed.

1.5 KW of Make (Toshiba/ Comet/hot max/Ralison) with ISI mark ( As per sample)

2.0 KW of make (Toshiba/ Comet) with ISI mark (As per sample)

Note: - The element shall be round / triangular or any type as per existing or as directed by Engr-in-charge

S & replace following type of indicating lamp (Red/ Green) for Geysers including taking down old unserviceable indicating lamp complete all as specified and as directed.

Round type

Rectangular type

S & F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed including taking down the old unserviceable gate valve complete all as specified and as directed.

S & F thermostat suitable for geyser of any capacity, any make(as per sample) including taking down old unserviceable thermostat complete all as specified and as directed.

S & F 15mm dia PVC connection of following with PTMT nuts of length 450 mm as inlet for cold water including taking down the old unserviceable PVC connection pipe complete all as specified and as directed.

S & F 15mm dia with PTMT nuts flexible connection pipe with steel wire braided hose 46 cm (18 inch) long as outlet for hot water and to withstand pressure upto 1.2 MPa for the following size including taking down the old unserviceable PVC pipe complete all as specified and as directed.

S & F plug top 15 A suitable for geyser upto 2.5 KW complete all as specified and as directed.

M & L for making holes in surface wall for exhaust fan upto 450 mm size all including plastering and making good the disturbed surface complete all as specified and as directed.

S & F wiremesh completely bounded with screws in wooden frame of size 300mm x 300mm to 480mm x 480mm and fitted at the exit of hole with necessary nut, bolt etc. to cover exhaust fan hole from outside complete all as specified and as directed.

S & F Mild steel work in framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for srew, including bending and welding angles as necessary, gusset platess, riveting etc. including nut & bolts complete all as specified and as directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet .5 mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Shri Sai Enterprises

M/s Vinod Yadav

Vaidehi E Link