PROVN OF ALL WEATHER COVERED TRG AREA WITH 2 FIT RAISED PLATFORM AND KOTA STONE FLOORING AT DTF OF RVC CENTRE AND COLLEGE AND PROVN OF INTERNAL AND EXTERNAL ELECTRIFICATION OF STATION AUDITORIUM AT BABUGARH UNDER AGE B/R-II AND AGE E/M-I OF GE (NORTH

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying of Cable or Pipe etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ losse soil and leveling of bottom surface to required level complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out in soft /loose soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed.

Removing excavated material n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed

M & L for plain cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed

M & L for 75mm thick plain cement concrete 1:3:6 type C-2 (40mm graded aggregate) in plinth protection complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggragate) as in bed bricks, coping ,surface channel, post fillings and drains etc including weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed

M&L for Broken bricks,hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 100mm thick PCC 1:3:6 type C-2 using (40mm graded stone aggragate) as in sub base of floor including necessary form work complete all as specified and directed

M&L for 40mm thick PCC 1:2:4 type B-O using (12.5mm graded stone aggragate) as in floor complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with hot dip galvanised self drilling and self tapping screws, neoprene and EPDM washers complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with hot dip galvanised self drilling and self tapping screws, neoprene and EPDM washers complete all as specified and directed.

M&L for roof trusses (framed), trussed, purlins, crane gantries, rails or steel work in tubular trusses(grade St-240) and fastenings and heavy bracket framing (Beam, tee, angle, channel tubla or flat sections) including distance pieces, cleats etc conforming FE-410 Gde E-250 quality -A and washers complete all as specified and directed.

M&L for 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry laid over and including 20mm thick cement and sand mortar 1:6 screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor, FR cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all base conduit accessories / fittings and PVC base box suitable for fixing switches with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 1.5 Sqmm copper conductor, connected to all fittings, and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:-

One light/exhaust/ fan point controlled by one, one way switches 5/6 Amps.

One 3 pin 5/6 Amps socket outet point on independent board, controlled by one, one way 5/6 Amps switch.

One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch.

All as described in item No 17 here-in-before but with 2.5 sqmm size completed all as specified and directed

S & F Switch piano flush button single pole one way 5 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 5 Amps, flush type complete all as specified and directed.

S & F Switch piano flush button single pole one way 15 amp complete all as specified and directed.

S & F Socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed.

S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed.

S & F LED light fitting 1x22/25 watt,220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F ceiling fan complete with Regulator blades, down rods,and accessories ,230V, 1200 mm sweep. Min air delivery 210 CMM with service value 6.00 BEE.Five Star rated with Brushless direct current motor (BLDC) complete all as specified and directed

M&L for Building security light fitting 1 x 35 LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

S & F sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed

S & F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed

S & F MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified and as directed.

M/L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 Mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point all as specifiied or indicated including testing on completion complete all as specified and directed

M&L for concealed point wiring with 4 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH, conforming to IS: 694-1990 PVC insulated, unsheathed copper conductor cable FR-LSH ,ISI marked including PVC conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, alongwith frame inner plate suitable for fixing moduler switches, sockets, regulator etc or with 3mm thick plastic laminated sheet top cover concealed in wall any height with and including continuous green earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly including cutting holes in or through the walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match for one 20 Amps socket outlet on independent board complete all as specified and directed. Note:- The point wiring shall include the wiring of light/ outlets of any length from the distribution board via switch to the point.

S & F sheet metal enclosure with single pole and neutral with two pin and earth plug and socket along with 20 to 30Amps rated SP MCB, 230 volt, 50 HZ complete all as specified and as directed.

M & L for submain wiring with two single core 10 sq mm nominal area with 1100 volt grade confirming to IS 694 (2010) PVC insulated unsheathed with one run of 10 sq mm multi stranded copper conductor cable (FRLSH) ISI marked for continuous green earth wire drawn in and including concealed rigid non-metallic PVC conduit (ISI mark) of size 25 mm dia medium grade with all fitting marked including cutting, chasing for conduit and making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match complete all as directed. Note:- Two runs of 10 Sqmm Cable and one run of 10 Sqmm cable together in & including PVC conduit shall be measured as one RM.

S&F Metallic Enclosure, SPN double door DB, IP43, door earthing,isolated neutralbar ,240V, AC, 4 way, with 200 Amps rated busbar ISI Marked complete all as specified and directed.

Supply , laying or fixing and testing XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area 10 sqmm 2 core complete all as specified and directed

Supplying laying or fixing, and testing XLPE insulated ,armoured heavy duty , electric cable with aluminum 1100 volt grade, cross sectioned area 70 Sqm 3.5 core complete all as specified and directed

M & L for GI light grade tubing 40 mm dia laid in trenches, road crossing, pasing through pipe or laid on wall/pole complete all as specified and directed

M&L for GI light grade tubing, 50mm dia laid in trenches, road crossing passing through pipe or laid on wall/pole complete all as specified and as directed

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and as directed. Note: Only punned thickness shall be measured for payment purpose.

Supply and laying fly ash brick length of brick shall be laid across the length of cable for protection of cable complete all as specified and directed.

High Tech Metal India (BID ID -3272816)

B.R. ENGINEERING & CONSTRUCTION CO. (BID ID -3274294)