Erection of BFL pole No 8 at BOP Kaithakona and also Maintenance of main panel of BOP

Amount

Erection of steel tubular or rail pole strut in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 35 sq. mm (32mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Providing and fixing 63 A, capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing 125 A, capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

Providing and fixing of incoming Change Over Switch -F1, 250 A, capacity inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. (HSN code - 8537, Cat No. ISSBOU0708, Havells/L&T/CS or other ISI mark).

Painting of 11-13 mtr. height GI Pole (exposed portion) i/c fittings, brackets, CG box, loop box, etc. in erected position with 1 or more coat of synthetic weather proof Aluminium paints and gloss enamel black paints of approved brand i/c red oxide primering to give an even shade after cleaning, scraping the rust/dust etc. complete as required and i/c the numbering of poles.

Numbering of MS plate size 200mmX150mm with Apcolite premium gloss enamel black paints(Gr-M4) and Synthetic Enamel on both sides parallel to border road including abbreviated name of the BOPs as existing etc. complete as required.

Rewiring of BFL pole No. 8 (2.5 sqmm copper wire).

Dismantling of lumminaries of BFL pole from existing BFL pole.

Rewiring of Looping box to Control gear box (4sqmm copper wire)

Providing and fixing of digital Voltmeter (0-500V) for suitable in the existing cubical panel (Make AE or other ISI mark).

Providing and fixing of digital Ampere Meter (0-500V) for suitable in the existing cubical panel (Make AE or other ISI mark).

Providing and fixing of Indicating lamp for suitable in the existing cubical panel.

Providing and Replacement of 14/15 watt LED lamp in the existing holder in Generator Rooms i/c etc. as reqd (Siska/Bajaj/CG/Havells Make).

Providing and fixing of MCCB, 160 Amp. rating, 4 pole, MCCB with adjustable thermal magnetic release unit, Adjustable overload 80-100%, Adjustable short circuit 5-10 In, Breaking Capacity Icu at 415V, AC, 36KA and terminal spreaders in existing cubical panel board including drilling holes in cubical panel, making connection etc. as required. conforms to IS/IEC 60947-2. (HSN Code - 8539, Model - CSCN250TM-4P) (C&S/L&T/Havells make).