Construction of 66KV Double Bus-Bar at 220 KV SS Maur

Amount

Earth work in excavation in foundations, trenches etc in all kinds of soil where pick jumper work is not involved & not exceeding2.00 mtr depth i/c dressing of bottom & sides stacking the excavated soil clear from the edge.

Earth filling under floors with surplus soil containing gravel or kankar up to 40 % excavatd from foundations & taken only from out side the building plinth in 15 Cm layer i/c ramming , watring & consolodating up to lead of 30 Mtrs

Dismantling brick work tile, masonry or tile lining in mud

Dismantling concrete-Cement concrete plain1:2:4 mix

Dismantling Reinforced cement concrete

Dismantling cement conglomerate floors 25mm to 50mm thick inuding concrete base.

Scraping-Bricks dismantled from brick work in lime or cement.

Scrapping of Bricks dismantled from brick work in mud

Dismantling of Brickwork in cement sand mortar

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge

Shuttering for faces of concrete foundations and foundation beam & plinth beam

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels

Centring & shuttering for flat surfaces such as suspended floors, roofs landings etc.

Cement concrete 1:8:16 With stone aggregate 40mm gauge

Cement Concrete 1:6:12 with 40mm gauge stone aggregate.

Cement concrete 1:5:10 with 40mm stone ballast

Cement concrete 1:4:8 with stone ballast 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-20 machanically batch mixed using batch type mixer as per IS1791 and vibrated by needle vibrator but excluding steel reinforcement, centring and shuttering in foundation and plinth.

Reinforced cement concrete M-20 mechnically batch mixed using batch type concrete mixture as per IS 1791 and vibrated by needle vibrator but execulding steel reinforcement centring and shuttering in super structure.

Damp proof course 4cm thick of cement concrete 1:2:4 with water proofing compound as per manufactures guidelines.

Damp proof course 7.5cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Supply and laying of dry of Brick bats

First class burnt brick work laid in cement sandmortar 1:6 in foundation and plinth

First class burnt brick work laid in mud mortar in foundation and plinth

115mm thick brick wall in cement sand mortar 1:4 without reinforcement in foundations and plinth

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

Ist class burnt brick work laid in cement sand mortar 1:4 in 1st storey up to 4.00 mtr above plinth level.

Extra for brick work done above 4.00 mtrs for every adition al ht of 2.00 mtrs. (Parapet )

Extra labour for First class burnt brick masonry in well steining of circular well.

Terracing consisting of tiles 22.86x11.43x3.83 cm laid over 25mm mud plaster 7.5cm mud filling on another level of 25 mm mud plaster i/c 2-coats of bitumen laid hot @ 1.65 kg/sqmtr on top of RCC slab i/c grouting with cement sand mortar 1:4 & top surface to be left clean after wire brushiing.

Bottom Khura on ground 1.2m x 0.6m consisting of brick on edge in cement mortar 1:3 over 75 mm CC of 1:8:16 i/c 12.5 mm thk Cement plaster 1:3.

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

CC gola 1:2:4 10 cm x 10 cm concave quardant along junction of roof with parapet finished smooth

P&F110 mm dia SWR UPVC bend for rain water pipe as per IS:14735.

Providing and fixing 110 mm dia . U.P.V.C Rainwater pipe of 2.5 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge. (If fixed on wall face clamp to be paid separatly as per respective item).

Base course of floor consisting of 100 mm thick CC 1:8:16 & 100 mm sand filling.

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 40 mm thick cement concrete topping 1:2:4.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body )..-Size 600x600 mm

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibro-hydraulic compaction machine and of approved size and design / shape laid in Ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge for Non traffic Areas and streets having width less than 3.05 mt.( Also not to used over footoaths).

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

12.5 mm thick cement plaster 1:6

20mm thick cement plaster 1:4 in two coat work

20mm thick cement plaster 1:5 in two coats work

Plastering on underside of ceiling 10mm thick cement plaster 1:4

Applying priming coat with metal primer on new steel or iron work including preparation of surface and Painting two or more coats with aluminum paint to give an even shade excluding priming coat

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Finishing walls with acrylic smooth exterior paint of required shade with 2-coats applied @ 1.67 ltr/10 sqmtr over & incluiding base coat of water proofing cement paint applied @ 2.20 Kg / 10 sqm.

Wall painting with Plastic emulsion paint of approved brand in two coats

Preparation of plastred surface or concrete surface for painting PE (incluiding sand papering the surface ) using ready mixed cement based wall putty by applying 2-coats to get required finish.

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)

For shutter area upto 0.50 sqm

For shutter area above 0.50 sqm

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete-I.S.I Designation No. III (size of door 851mm to 1000mm)

Providing and fixing aluminium work for doors,windows, ventilators & built up standard tubular sections & other sections 733 & IS 1285 of Jindal / equivalent make approved ny engg incharge fixed with rawl plugs & screws with fixing clips or with expansion hold fastners i/c necesasry fitting up to gap at junctions, top, bottom a7 sides reqiored PVC plugs Aluminiumsections shall be smooth rusat free straight & jointed mechanically complete as per architectural drawings & the directions of engineer incharge.

Fixed portion for chowkats

Shutters of doors / windows/ cup Boards

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Prelaminated particle board with decorative lamination on Both side.

P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge -Float glass panes of 5 mm thickness

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete-250mm x 16mm

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position-Flats

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position.

Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects.-Above 20mm dia bars

Welding by gas or by electric plant, including carriage to and from workshop etc.

Steel reinforcement for RCC work where not included in the complete rate of RCCincluding bending, binding and placing in position complete:- Up to 20mm dia bars.

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.

Providing and laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86cm high half brick deep including excavation, refilling and disposal of surplus earth up to 50mtr complete as per Punjab PWD specifications

Boring for hand-pump in clay fitting strainer and pipe-Above 75mm dia bore but not exceeding 100mm-From 0 to 15 m.

Boring for hand-pump in clay fitting strainer and pipe-Above 75mm dia bore but not exceeding 100mm-Exceeding 15 m but upto 30 m..

Providing and fixing RCC manhole covers only

Providing and fixing in position Centrifugally cast iron soil waste vent or antisyphonage pipes single socket to I.S.I. specification of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of lead jointing.

Providing and fixing in position H.C.I special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.

Electrical installations

PVC conduit pipe wiring system with modular switches. Wiring in PVC insulated copper conductor single core FR cableoverall 1.5sqmm to be laid in heavy gauage PVC conduit pipe 20/25mm dia recessed in wall etc complete with powder coated/anodizes metal boxes

wiring fan point with fan box

wiring light point

wiring 6 amp plug control

wiring 16/20amp power plug control point

Supply and erection of PVC insulated FR single core copper conductor cable suitable up to 1100 volts grade

Overall size 1.5sq.mm (Un-sheathed)

overall size 2.5 sqmm

overall size 4 sqmm

Supply and erection of heavy gauge PVC conduit pipe 25mm dia on surface for wiring purposes including bend ,junction boxes, etc

Supply and erection of MCB single pole 0.5-4amp (10KA,curve-C)for circuit protection against overload and short circuit control fault suitable for 240/415 volts

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Single Pole 40amp. (10kA, Curve-C)

Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting

NON-SCHEDULE ITEMS

Supplying & Fixing of General purpose tube fitting of Crompton make on wall of 1X36 W T-5 (CFL).

Providing & fixing ceilling fans standard make 1400mm sweep of cool breeze range with regulator Crompton Make.

Supplying & Fixing exhaust fan 18'' sweep of Crompton make including louver (Model T5JB1328EB) 1x28 W T-5.

Providing and fixing GI barbed wire in 4 rows complete as per specification

Providing and fixing neting mesh complete in as aspect as per specification

P&F various angle iron posts complete as per drawing

P/F MS angle iron nosing of size 50x50x3 mm complete in all respects forcable trenches as per drawing no. CW/DS- 2887 R-1

Providing & Fixing MS Chequred plates of 5 mm thickness complete as per directions of Engineer-in-Charge

Providing and fixing of M.S. Cable racks made out of M.S. flat 75x6 mm or M.S. angle 40x40x6 mm complete in all respects as per drawing no. CW/DS- 2887 R-1

Supplying ,Hoisting & placing of Ferro-cement trench cover, frame of size given bleow made of MS flat 50x3mm with 6mm dia bars at 4-1/2” and 9” c/c welded to flat with lifting hook as per DRG.No. CW/ DS-2537-R-5 and CS/DS -2420 –R-3 complete.-T-3-type trench of siz 30.65x0.65 as per technical specificiation no.13

T-4 type 2'6''x1'9''

Fixing of templates along with foundation bolts as per Drg.

P/F GI sheet of TATA make Durashine complete as pr specifecations

P & F 3BHP Non Clog Pump

P/F steel nosing made of angle 30x30x3 mm with MS flat 15x4mm and 6mm dia bar

Supplying and spreading of 20 mm size crushed stone in 75 mm thick layer over existing PCC flooring in the yard area

Disposal of surplus earth/malba upto 5 KM lead including loading/unloading

Recovery of bricks dismantled

Recovery of brick bats

Recovery of steel

Recovery of Ceiling Fan

Recovery of Tubelight

Recovery of Aluminium Sections

Recovery of Steel Scrap

Adjusted/Landing Rates (i/c the effect of extra carriage and difference of quarry rates wherever applicable)

Fine Sand

Cement

Steel

Coarse Sand

Crushed Bajri 12mm/13.2mm

Crushed Bajri 10mm/11.2mm

Stone ballast 40mm

Bricks

Tiles

Bidder Name

Amount in Words

SURINDER KUMAR CONTRACTOR (BID ID -641094)

BHARPUR SINGH (BID ID -640966)

P K TRADERS (BID ID -640951)

SURINDER KUMAR CONTRACTOR (BID ID -641094)

BHARPUR SINGH (BID ID -640966)