Dang Kalan village providing FHTC

Amount

Supply & Erection of Horizontal spindle split casing type pumping sets of minimum four (4) star rating duties directly coupled to AC squirrel cage induction type motor with 1440 RPM, 3 phase, 50 Hz and accessories as described in Schedule No. II complete in all respects with priming arrangement with complete base frame (A) Raw water pump set 1000 LPM 35 Mtr. Head

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricates from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900mm having following item (a) For Raw water Pumpets for 1000 LPM x 35 M Head = 2 Nos (a) Main Switch 63 Amp. 2 Nos (L&T Siemens, ABB), (b) Volt meter 100x100mm range 0 to 500 Volt 1 No. (AE/KAPPA/L&T) (c) Amp. Meter 100x100mm range 0 to 100 Amp. 2 Nos (AE/KAPPA//L&T) (d) CT 100/3 = Nos (AE/KAPPA/L&T) (e) VSS = 1 No. & ASS = 2 Nos. of approved make (f) SPP 2 No. of approved make (g) Motor starter, star delta 2 Nos for 1000 LPM x 35 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity= 2 Nos (i) Indicating Lamp = One Set (j) Change over switch 63 AMp. 1 No.

Supply, erection, testing of ISI marked copper wire for 2 Nos motors with under ground system in PVC and flexible pipes copper wire size 6 sq. mm complete in all respects with accessories like thimble etc. complete in all respects

Supply, erection, testing of ISI marked copper wire for 1 Nos pannel board from main switch to panel and wiring of panel with size 10 sq.mm (copper wire) ISI marked complete in all respects with accessories like thimble etc. complete in all respects

Supply erection, testing of light fittings including wire in the pump chamber with material upto 10 points including switch, button, plug, PVC conduit pipe and copper wire etc. as per approved specifications complete in all respects

Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable GI sheet of approved make complete in all respects

Providing and fixing ceiling fan 1400 mm (56") with speed adjuster of reputed make (make crompton, Usha, Bajaj, Orient) complete in all respect

Supply erection testing of reputed make LED vapour light 100 watts with fittings and accessories complete in all respect

Generating set 25 KVA Supply, erection, testing and commissioning of 25 KVA/20 KW of diesel generating set, noise control acoustic enclosure radiator cooled 3 phase 4 wire, 50 cycles, 415 + (-) volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete as per approved NIT. The rating should be at 1500 RPM (a) Diesel Engine (b) Alternator (c) Base Plate (d) Battery 24 V (e) 1x25 Sq.mm 3.00 core XLPE Aluminum = 20 mtrs (f) Tools AMF Panel (a) Motorized change over switch 250 AMp. 4 P with fuse base and HRC links 250 AMp. (b) Under voltage/over voltage relay = 2 Nos 415 VAC (c) Engine start relay 24 VDC 1 No. (d) Electronic TImer 24 VDC 1 No. (e) Electronic Timer 24 VAC 2 Nos (f) Auxiliary relay 220 VAC 2 Nos (g) Auxiliary relay 220 VAC 3 Nos (h) Metering set 415 VAC 1 set (Amp. Meter, Volt meter, ASS, VSS Phase indicators control fuse frequency meter CT's) (i) Metering set 24 VDC (Amp. Meter Volt meter (j) Over Load protection for DC 1 No. (k) Battery charger 24 VDC (Blueron make) (l) Copper bus bar of suitable size (m) KWH meter 96 square mm size (n) Starting fuse button and key swithc (on/off) (o) ENgine protection unit with audio visual alarm and shut down for low lubricating oil presure and high coolants temperature. (p) Indicating lamp for low lubricating oil pressure high coolant temperature, set running, load on, DC control on. note :- Control panel shall have the provision to provide auto manual failure panel (AMFP)

Providing and fixing of 15 mm GI union nominal bore complete in all respect and the entire satisfication of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Providing and fixing of ½" mm GI elbow complete in all respect and the entire satisfication of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Providing and fixing of ½" mm GI socket complete in all respect and the entire satisfication of Engineer-in-Charge (make Jindle/ Parkesh/Tata) complete in all respect

Bidder Name

Amount

Narender Singh Contractor(GSTN-06AMFPK3960J1ZX)

KANSHI RAM CONTRACTOR(GSTN-NA)

Rajbir Singh(GSTN-NA)

Sunder Pal Contractor(GSTN-NA)

Jagbir Singh Contractor(GSTN-NA)

KANSHI RAM CONTRACTOR

Sunder Pal Contractor

Rajbir Singh

Jagbir Singh Contractor

Narender Singh Contractor

Rajbir Singh

KANSHI RAM CONTRACTOR

Jagbir Singh Contractor