SPECIAL REPAIR TO BLDG NO P 01 BDL P 06 MAIN OFFICE P 12 MET LAB P 02 FIRE STATION AT PREDICTIVE TECHNOLOGY LABORATORY PTL AT CQA A KHADKI UNDER GE CENTRAL KHADKI

Amount

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) and removing the debris outside the defence land complete all as specified and as directed by Engineer -in-Charge.

M & L for vitrified tiles double charged/ultra charged 10mm thick (square/rectangular) polished area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer -in-Charge.

All as per Ser item No 02 but in skirting, dado and pillar in vertical surface laid over and incl 10mm thick rendering in CM 1:4 and pointied in white or coloured cement to match complete all as specified and as directed by Engineer -in-Charge.

M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match complete all as specified and as directed by Engineer -in-Charge.

M & L for Glazed coloured ceramic tiles External/Internal in vertical surface 300mmx450mmx7mm/300mmx600mmx7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer -in-Charge.

M & L for Machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes complete all as specified and as directed.

M & L for Machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish complete all as specified and as directed.

S & F in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specifed and as directed.

S & F in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing cistern including 'P' or 'S' trap complete all as specifed and as directed.

S & F in repairs for Plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern flush pipe and waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing urinal spreader of PTMT any colour, grating and union for discharge pipe fixed complete all as specified and as directed by Engineer -in-Charge.

S & F for vitreous china white urinal partition of size 310mmx700mm fixed to wall with brass CP screws fixed complete all as specified and as directed by Engineer -in-Charge.

S & F in repair for 20mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for Chromium plated brass angle valve for 15mm bore pipe, fixed complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinal fixed complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed by Engineer -in-Charge.

S & F in repair grating doom 125mm dia with waste hole of PTMT (min wt 40g) complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed by Engineer -in-Charge.

S & F in repair for 75mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall complete all as specified and as directed by Engineer -in-Charge.

S & F in repair for 75mm bore PVC (SWR) bends, or similar fitting are required to make the system functional complete all as specified and as directed by Engineer -in-Charge.

S & F in repair for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal fitting as reqd to make the system functional complete all as specified and as directed by Engineer -in-Charge.

M & L for 75mm bore PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer -in-Charge.

S & F in repair Rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifed in SSR Part I complete all as specified and as directed by Engineer -in-Charge.

S & F 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed by Engineer -in-Charge.

S & F 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/concelled including taking down old steel tubing etc complete all as specified and as directed by Engineer -in-Charge.

S & F for Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer -in-Charge.

S & F in repairs for Vitreous China table top/Under counter wash basin, white or ivory colour flat back or ovel type, any size excluding taps, waste chain and plug and porcelain stopper but including brackets any size, including cutting for and pinning in ends of brackets or erecting stand stand but exclusive of fixing of suppy and waste pipe etc fixed complete all as specified and as directed by Engineer -in-Charge.

S & F Central hold basin Mixer chromium plated Hot and colt with copper pipe complete all as specified and as directed by Engineer -in-Charge.

Taking down cement plaster on concrete or brick wall surface etc inlcuding racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by Engineer -in-Charge.

M & L for 15mm thick Rendering on brick /concrete surface in CM 1:6 on wall with water profing compound finishing even & smooth without using extra cement and similar like at any height including necessary scaffolding , ladder & formwork ccomplete all as specified and as directed by Engineer -in-Charge. (Note : water proofing compound shall be measured & paid separetely)

M & L for complete removal of existing treatement/old plastered/concrete surface from internal surface of wall by wire brushes & stopping of surfaces & levelling/edging the disturbed places/edges using 1-2mm thick filling compound of Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coat of oil bound distemper emulsion over one coat of alakali resistant priming paint upto height 7 mtr etc complete all as specified and as directed by Engineer -in-Charge.

M & L for 15mm thick Rendering on brick /concrete surface in CM 1:4 on wall with water profing compound finishing even & smooth without using extra cement and similar like upto 15 mtr height including necessary scaffolding , ladder & formwork complete all as specifed and as directed. (Note : water proofing complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered and other surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation of new plastered wall surface and applying two coats of Anti fungal weather proof grade exterior Acrylic emulsion paint of approved tint over a coat of weather proof primer without any dilution with forced coverage not more than 3.5 Sqm/Ltr as per manufacturer instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Ltr per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in subsequent coats of paint upto height 10 mtr including necessary scaffolding etc complete all as specified and as directed by Engineer -in-Charge.

M & L for 15mm thick in cement mortar 1:3 mixed with WPC as in chajja upto height 10 mtr including necessary scaffolding etc complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation newly plastered surface and applying two coat of exterior acrylic emulsion weather proof treatement upto height 15 mtr including necessary scaffolding etc complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation of old plastered /concrete surface of ceiling and applying two coats of oil bound distemper emulsion, white or tinted including 3mm thick birla white putty over a coat of primer (where as required ) necessary scaffolding etc complete all as specified and as directed by Engineer -in-Charge.

Demolition of existing tarfelt any no of layers /plaster/Thermo seal etc in water proofing treatement to roof and cleaning the surface with wire brushes including removal of all dust or dirt etc to the distance outside the defence land complete all as specified and as directed by Engineer -in-Charge.

M & L for providing 50mm thick cement mortar (1:2:4) type B-0 (using 12.5mm graded stone agg) as in roof padding required to maintain desired slope complete all as specified and as directed by Engineer -in-Charge.

M & L for PCC 1:2:4 type B-0 (12.5mm graded stone agg) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed by Engineer -in-Charge.

M & L for Rendering 10mm thick on concrete surface in cement mortar (1:3) with water proofing compound finishing even and fair without using extra cement as in under layer of roof treatement at any height complete all as specified and as directed. (Note : Water proofing complete all as specified and as directed by Engineer -in-Charge.

Supply only Liquid water proofing compound complete all as specified and as directed by Engineer -in-Charge.

Applying a coat of bitumen primer @ 0.3kg/Sqm conforming to IS 3384 and laving 3mm thick APP modified water proofing membrane reinforced with non woven polyster matt having softening point not less than 150 degree centigrade, having tensile strength 650 N/Sqcm in longitudinal & 400 N/Sqcm in transverse direction by torch method with min 100mm side lap and 150mm end lap followed by application of a coat of hot blown bitumen 85/25 grade @ 1.2kg per sqm over the APP memebrane complete all as specified and as directed by Engineer -in-Charge. (Note : The water proofing treatement shall be carried out by the Authorised applicator of the manufacturer.)

M & L for applying two coat of solar reflective bituminious aluminium paint over APP memebrane @ 0.20Kg/Sqm complete all as specified and as directed by Engineer -in-Charge.

S & F in repair for gypsum reinforced boards 595x595x8 to 10mm thick for ceiling on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down old/existing ceiling boards of any type (fibre, pulp insulation etc) or insulation boards any thickness incl fillets complete all as specified and as directed by Engineer -in-Charge.

Taking down chowkhat or frame n. exc 1.5 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed by Engineer -in-Charge.

Taking down chowkhat or frame exc. 1.5 Sqm but n. exc 4 Sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed by Engineer -in-Charge.

M & L for Aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 5mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed by Engineer -in-Charge.

S & F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290,Gde-E-165 etc complete all as specified and as directed by Engineer -in-Charge.

S & F in repair Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and as directed by Engineer -in-Charge.

S & F factory made Solid PVC Door Frame of size 50mm x 47mm single revated made out of extruded 5mm plain colour PVC sheet reinforced with M.S. Square tube etc complete all as specified and as directed by Engineer -in-Charge.

S & F for Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing etc complete all as specified and as directed by Engineer -in-Charge.

S & F Butt hinges 100mm in size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed by Engineer -in-Charge.

S & F Extruded aluminium alloy handles 150mm long in size , fabricated type,anodised complete all as specified and as directed by Engineer -in-Charge.

S & F Aluminium anodised, barrel tower bolt 200mm long, powder coated of extruded section and fixed complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation of Old painted wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint etc complete all as specified and as directed by Engineer -in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles and removing the debris outside the defence land complete all as specified and as directed by Engineer -in-Charge.

M & L for Brick work with fly ash old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 in any position, complete all as specified and as directed by Engineer -in-Charge.

M & L for 15mm thick Rendering on brick /concrete surface in CM 1:6 on wall with water profing compound finishing even & fair complete all as specifed and as directed. (Note : water proofing complete all as specified and as directed by Engineer -in-Charge.

M&L for TMT bars 6 mm to 8 mm dia and over and cut to length, bend to shape required including cranking, bending spirally for hoping for columns, RCC cover slab/chajja/facia hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer -in-Charge.

M & L for reinforcement cement concrete (nominal mix) Type B0 1:2:4 (using 12.5mm graded agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the similar articles with plane face including formork etc complete all as specified and as directed by Engineer -in-Charge.

M & L for Granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed by Engineer -in-Charge.

Overhauling, servicing and realignment of steel/iron gate any type of area not exc 12 Sqm including replacement of defective bearing and grinding/replacement of wheels for smooth movement of shutter, replacement of clamps, bolt, holdfast etc including cleaning, oiling and greasing of movable parts and welding work complete all as specified and as directed by Engineer -in-Charge. (Note : (i) Necessary arrangement of crane/moving ladder shall be made by the contractor without any extra cost)

Overhauling, servicing and realignment of steel/iron gate any type of area exc 12 Sqm including replacement of defective bearing and grinding/replacement of sliding wheels (Top & Bottom) for smooth movement of shutter, replacement of clamps, bolt, holdfast etc including cleaning, oiling and greasing of movable parts and welding work complete all as specified and as directed by Engineer -in-Charge. (Note : (i) Necessary arrangement of crane/moving ladder shall be made by the contractor without any extra cost)

M&L for complete removal of existing treatment on wall surfaces of any description including brooming down with steel wire brushing, scrapping down smoke soot's, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm / Ltr as per manufacture's instruction and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer -in-Charge.

M & L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer -in-Charge.

Taking down carefully copper/aluminium point wiring (light, socket or power) complete inciuding fittings such as switches, ceiling roses, pendants, regulators, sockets etc and making good disturbed surfaces of walls, floors etc.complete all as specified and as directed by Engineer -in-Charge.

Taking down MCBs with sheet metal enclosure, main switch, DB etc and making good disturbed surfaces to match with existing surfaces complete all as specified and as directed by Engineer -in-Charge.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed by Engineer -in-Charge.

Taking down Light fittings any type any size .

M&L for point wiring 1100 volt grade single core PVC and unsheathed FRLS cable with multistranded copper conductor 1.5 sq.mm drawn through and including PVC Casing & caping with all accessories like bends, Tees, Crosses, moduler cover plates etc on surface of wall/ceiling including PVC insulated unsheathed earth wire with copper conductor of size 1.5 sq.mm & to be terminated in sunken metalic gang boxes suitable for modular fittings (measured seperately) complete all as specified and making good disturbed surfaces for (a) One Light point controlled by one, one way switch.

b) One ceiling/exhaust fan point controlled by one switch and regulator

c) One 5 pin socket outlet, 6 Amp 230 V on the same board with other switches.

d) One 5 pin 6 amps socket outlet point on independent board.

e) One bell/buzzer point controlled by one bell push.

All as per item Sl. No. 77 above but wiring with 2.5 sq.mm multistranded cable and earth wire with copper conductor of size 2.5 sq.mm for 15 amps power point.

S&F switch modular type one way one module 6 Amps 230 V complete all as specified and as directed by Engineer -in-Charge.

S&Fswitch modular type one way one module 16 Amps 230 V complete all as specified and as directed by Engineer -in-Charge.

S&F modular socket two module 2 in 1, 5 pin 6 amp 240 volts AC complete all as specified and as directed by Engineer -in-Charge.

S&F modular socket two module 2 in 1, 6 pin 16 amp 240 volts AC.

S&F bell push modular type 1 module 6 Amp.

S&F bell AC 230 volt single pole.

S&F ceiling rose surface PVC/Polycarbonate two to three terminals/plate complete all as specified and as directed by Engineer -in-Charge.

S&F step fan regulator electronic modular type 2 module 120 W,suitable for ceiling fan working on 230 volt AC complete all as specified and as directed by Engineer -in-Charge.

S&F LED Tube light fitting 1x 20 W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and as directed by Engineer -in-Charge.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC Surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer -in-Charge.

S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer -in-Charge.

S& F LED Building light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistantcomplete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete withIP 65/66 protection complete all as specified and as directed by Engineer -in-Charge.

M&L for Sub Main Wiring with two run single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn through and including PVC casing caping and 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE- Three run of 4 sq.mm cables with accessories .

S&F MCB DB TPN 4 way double door for 415 volts with 200 Amps bus capacity including fixing arrangement complete all as specified and as directed by Engineer -in-Charge.

S&F sheet metal enclosure DB single pole and neutral for 240 volts 8 way double door with 200 Amps rated busbar flush/surface mounting complete all as specified and as directed by Engineer -in-Charge.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A 240 V complete all as specified and as directed by Engineer -in-Charge.

S&F MCB TP 63 amp 415 volt complete all as specified and as directed by Engineer -in-Charge.

S&F MCB SPN 240 volt 32 amp 10KA complete all as specified and as directed by Engineer -in-Charge.

S&F MCB single pole 240 volt 6 to 40 amps 10 KA complete all as specified and as directed by Engineer -in-Charge.

S&F exhaust fan steel body, 300mm sweep, 230 volts,complete all as specified and as directed by Engineer -in-Charge.

S&F modular metel box 1/2 module complete all as specified and as directed by Engineer -in-Charge.

S&F modular metel box 3 module complete all as specified and as directed by Engineer -in-Charge.

S&F modular metel box 4 module complete all as specified and as directed by Engineer -in-Charge.

S&F modular metel box 6/8 module complete all as specified and as directed by Engineer -in-Charge.

S&F modular metel box 12 module complete all as specified and as directed by Engineer -in-Charge.

M&L for Sub Main Wiring with two run single core 10 Sqmm PVC insulated unsheathed (FRLSH) cable with stranded copper conductor drawn in PVC Casing caping & accessories Suitable size with and including 10 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge. NOTE-three run of 10 sq.mm with accessories shall be measured as One length.

S&F Industrial plug and socket board TP 32 Amps including plug top and MCB "C" curve 10 KA 32 Amps Make Legrand Cat No 5078 18 and 4086 58 /L&T /ABB including making good the disturbed suface of wall including material complate all as specifide and directed.Supply and fix Triple pole and earth encolsure with a three pin and earth plug with socket complete with one triple pole MCB 32 amp complete all as specified and as directed by Engineer -in-Charge.

S&F TPN DB 12 WAY VPTN Make Legrand CAT part no 5077 57 with provision for DPX 3, 250 MCCB as a Incomer and SP/TP MCB's as outgoing with 250 Amp Copper busbar for 415 volts including fixing arrangement complete all as specified and as directed by Engineer -in-Charge.

S&F MCCB TP 250 Amp, 415 volt complete all as specified and as directed by Engineer -in-Charge.

Taking down & refixing ceiling fan 1200/1400mm sweep including two coat of synthetic enamel paint after cleaning,greasing and replacement minor parts if required such as nut bots , washers , rubber washer etc

M & L for Point wiring 1100 volt grade single core PVC and unsheathed FRLS cable with multistranded copper conductor 1.5 sq.mm drawn in and including electrical grade stove enamelled conduit 20 mm dia including all fittingson surface / wall including PVC insulated unsheathed earth wire with copper conductor of size 1.5 sq.mm & terminating in flame proof terminal boxes complete all as specified and as directed by Engineer -in-Charge.

M & L for Point wiring for one 3 pin socket outlet 15 A independent with PVC and unsheathed FRLS cable with multistranded copper conductor 4 sq.mm drawn in and including electrical grade stove enamelled conduit 20 mm dia including all fittingson surface / wall including PVC insulated unsheathed earth wire with copper conductor of size 4 sq.mm & terminating in flame proof terminal boxes complete all as specified and as directed by Engineer -in-Charge.

S&F for LED light fitting 1x16/18/20 Watt flame proof, CMRI certified ecommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable complete all as specified and as directed by Engineer -in-Charge.

S&F for LED light fitting 2x16/18/20 Watt flame proof, CMRI certified ecommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable complete all as specified and as directed by Engineer -in-Charge.

S&F Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and as directed by Engineer -in-Charge.

M&L for Sub Main Wiring with 5 run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in stove enamelled onduit 25 mm dia with all fittings on wall (surface type, flame prrof standared) complete all as specified and as directed by Engineer -in-Charge. NOTE-5 run of 6 sq.mm(Red, yellow,Blue, Blk and green in colour) & One run of metac conduit with accessories shall be measured as One length

S&F for of Flameproof cum Waterproof LED Bulk Head light fitting for building security light of capacity 60W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed by Engineer -in-Charge.

S&F 4 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V with rupturing capacity 35 KA complete all as specified and as directed by Engineer -in-Charge.

S&F for Fire Alarm sounders / Sirens electronic type horizontal two stage continuous normal operation for at least 50 minutes with sound level 65 db to 120 db Measured at 1.5 m with sound output variation of + 5 db 500m range complete all as specified and as directed by Engineer -in-Charge.

S& F for Addressable manual call point break glass type with alarm LED complete all as specified and as directed by Engineer -in-Charge.

S&F for Detectors Complying with and type certified to EN-45 Addressable type smoke detector Photoelectric / Optical with base with self built intelligence as per IS: 11360 complete all as specified and as directed by Engineer -in-Charge.

S&F battery 7 AH ;12 V DC complete all as specified and as directed by Engineer -in-Charge.

S&F cable armoured 1.5 sq mm 3 core 1100 V grade with copper conductor complete all as specified and as directed by Engineer -in-Charge.

S&F 8 Zone Main fire alarm panel, integration of all existing 4 sub panels, commissioning and making the system including replacement of spares as per requirement complete all as specified and as directed by Engineer -in-Charge.

S&F 4 Zone Main fire alarm panel, hooter, manual call point, smoke detector, servicing, checking and connecting including spares as per requirement complete all as specified and as directed by Engineer -in-Charge.

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed by Engineer -in-Charge.

M&L for earthing complete with pure copper solid bar 17.2 mm outer dia electrode, including testing 3 mtr long and having suitable hole on top to connect earthing strip with nut, bolts and washers burried directly and verticaly in ground with top edge at 30 cm below ground level after making bore hole of 200 mm dia and 3.5 mtr deep using suitable machanical drilling, machine connected with copper strip of 25x3mm size with copper nut, bolts and connected to test point from earthing pit, the earthing should be filled with carbon based earthing compound, the resistance of the compound should be less than 1 ohm, the compound should be highly conductive, hygroscopic, non mgnetic, non corrosive in nature and have best moisture retaining qualities with ph value between 7-9. including reinforced plastic pit not less than 300x300x240 mm with pit cover, including necessary earth work complete all as specified and as directed by Engineer -in-Charge. NOTE :-(a) Contractor should visit site before quoting the rates. (b) Quoted rate deemed to be included cost of demolition of old earthing. (c) Contrctor should provide all necessary safety measures during exectution the job and responsible for any loss to the Govt property during execution the job.

V.R.PRAJAPATI AND CO. (BID ID -3460441)

M/s S S Enterprises (BID ID -3460756)

JP ENTERPRISES (BID ID -3460300)

MANIYA CONSTRUCTION CO (BID ID -3460523)

MAHESH DADAJI BACHHAV (BID ID -3460193)

M/S - R K CONSTRUCTIONS (BID ID -3465777)

KARPE AND SONS CONSTRUCTION (BID ID -3458941)

UNIQUE ENGINEERS (BID ID -3466110)

Bidder Name

JP ENTERPRISES

V.R.PRAJAPATI AND CO.

UNIQUE ENGINEERS

M/S - R K CONSTRUCTIONS

MAHESH DADAJI BACHHAV

KARPE AND SONS CONSTRUCTION

S M MISHRA

MANIYA CONSTRUCTION CO

M/s S S Enterprises