WBPHED/20_01/EE/BOLMD/24-25

Amount

CIDF Non-Raising Sluice Valves, PN 1.0 rating (Conforming to IS:14846) for wash out line. (MOC & TC needed for valve).

80mm dia.

100 mm dia

125 mm dia

CIDF single door swing Non Return Valve, PN 1.0 rating (Conforming to IS:5312) (MOC & TC needed for valve).

80mm dia.

100 mm dia

125 mm dia

3mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG.

80mm dia. CI Top & Bottom adopter.

Supply and delivery at site of energy efficient LED Smart Bright street light fixture with IP66 and IK06 protected LM high pressure alluminium di cast housing with polycarbonate cover capable of delivery standard lumen output as follows .The lens plate should be bolted to the metal core PCB should not be glued . The driving current should be more than 700 mA . It should have internal surge protection of minium 4kv , lumen /watt >100, Drivier efficiency > 85% ,PF >0.95, THD<10% .

Philips BRP409 LED 110 CW M2 FG PSU GR V3.

Supply,delivery and storage at store of automatically controlled diaphragm type Chlorinator dosing pump with flow rate 100 LPH and maximum pressure of 10 kg/ CM2 with all accessories for pump & motor, foundation bolt, suction and discharge flange and with storage tank of dosing solution of 100 Ltr. Capacity and the prime mover to be coupled with pump of 0.5 H.P., 3 Phase, 1450 RPM, squirrel cage TEFC induction motor, Motor will be IE3. [Make of Machine: As per attached vendor list of PHED.] N.B. T.C. & G.C. of pump & motor needed.

Supply & delivery of Chlorine testing kits suitable for carrying out 100 nos. tests using method Ample Comparator type. Residual chlorine=0.1ppm to 2.0ppm (09Nos Amples) its sample matching, It is packed in handy & hardy blackbox with handle. (TC needed with proper validation as per direction of EIC).

150mm dial Pressure gauge [Range 0-7kg/cm²] with glycerine filling inside the dial including brass cock and fitting complete [This cost includes 15mm. dia G.I. pipes and specials]. [N.B: (1) Third party inspection of the work is mandatory as per guidelines of NJJM and direction of EIC without any extra cost. (2) Drawing, design and make of the materials are to be approved from the EIC before procurement.]

Add: GST @ 18% on sum of Item No: 1 to 09

CONCORD ENGINEERING

PADMA ENGINEERING CO.