SPECIAL REPAIR TO BLDG NO T 51 OF 60 PARA FD HOSPITAL UNDER GE WEST AGRA

Amount

Taking down chowkats or frames, without taking off shutters from the frames, not exc 1.5 Sqm each complete all as specified & as directed.

Taking down chowkats or frames, without taking off shutters from the frames, exc 1.5 Sqm but not exc 4 Sqm each complete all as specified & as directed.

M&L 35 mm thick 2nd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified & as directed.

S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening complete all as specified & as directed.

S & F factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame .Including 3 Nos PVC hinges100 mm long , 2Nos aluminium handle 150 mm long and 2 Nos aluminium tower bolt 200 mm long fixed to each shutter at site as per specification in clouse No 8B.2 at SI page No.145 to 147 and shown in drawing on SI page No 176 of SSR 2020 respectively and as directed.

S& F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S& F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified

S& F 5-5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified & as directed.

S&F aluminium (Die cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified & as directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 complete all as specified & as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified & as directed.

S&F aluminium anodized barrel tower bolt of extruded section, 200 mm long complete all as specified & as directed.

S&F aluminium anodized barrel tower bolt of extruded section, 150 mm long complete all as specified & as directed.

S&F aluminium anodized handle cast type 150 mm long complete all as specified & as directed.

S&F in repairs stailess steel curtain rod 25 mm dia with 2mm web thickness including brackets, side knob etc complete all as specified & as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & as directed.

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre complete all as specified & as directed.

M&L 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screw in ceiling flat or slopy complete all as specified & as directed.

M&L for aluminium anodised louvered ventilator with provision for fixing PVC body exhaust fan using ‘Jindal” aluminium section 1.50 mm thick including 4mm thick figured glass and stainless steel wire mesh 0.56 mm nominal dia. of wire and average width of aperture 1.00mm etc complete all as specified and directed.

S&F stainless steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.00mm complete all as specified & as directed.

S&F pressed steel door frame of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock & strike plate etc. complete all as specified & as directed.

M&L providing cement concrete 1:2:4, type B-1(using 20mm graded stone aggregate) as in hold fast, bed plates, and the like including weathering, slightly arounded or chamfered anagle and throating as directed.

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in back filling of pressed steel door frames complete all as specified & as directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified & as directed.

S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.complete all as specified & as directed.

M&L brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified & as directed.

M&L brick work with subclass ‘B’ bricks (EXCEPT BRICK), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified & as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified & as directed.

M&L for 15mm thick rendering in CM 1:6 on surfaces of wall finished the surface fair & even complete all as specified & as directed.

M&L for rendering 15 mm thick on fair faces of concrete/ brick surface wall in cement mortar 1:4 using WPC as per manufacturer's instruction, finished fair and even complete all as specified and directed. Note:- WPC shall be measured and paid separately .

Supply only integral water proofing compound (Liquid).

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of wall care putty of 1mm thick complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall by complete removal of existing treatment and applying two coats of oil emulsion distemper over a coat of wall care putty of 1mm thick complete removal of existing treatment

M&L for preparation of old decorated surfaces of wall by complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces over 10cm in width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 3 mm thick figured glass, frosted head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above the ground level complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate), in plinth protection 50mm thick finished even and smooth without using extra cement including making joint 12 wide to the full depth of PCC at max 3 mtrs and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

Dismantling water tanks and removing to store, capacity of water tank exc 500 & n exc 1000 litres complete all as specified and directed.

M&L rotational moulded polyethylene water storage tanks, tripple layer, with PVC threaded lid (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 1000 litres complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed in CM 1:4 as in verticle surface etc complete.

M&L for vitrified light shade ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes

M&L vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, on vertical surfaces such as skirtings, dados and risers to steps etc and jointed in neat cement slurry incl and over 10mm thick rendering CM 1:4 and pointed in colour cement to match the tiles complete all as specified and direrected.

M & L for machine cut & polished smooth surface of kota stone slab 20-25mm thick as in flooring including mirror polishing and provision of 20 mm thick cement mortar screed bed 1:6 complete all as specified and direrected.

M & L for machine cut & polished smooth surface of kota stone slab 18-20mm thick as in skirting including mirror polishing and provision of 10 mm thick cement mortar backing coat in CM 1:4 complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

M&L for GI tubing 15mm dia, medium grade, with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed.

M&L for GI tubing 20mm dia, medium grade, with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed.

Refixing only old GI tubing 15mm bore pipe and connection in new or old position as on walls, ceiling, floors, etc. complete all as specified and directed.

Refixing only old GI tubing 20mm bore pipe and connection in new or old position as on walls, ceiling, floors, etc. complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F PVC (SWR) pipes, type 'A', single socketed in any length with rubber ring joints laid in trenches or floors 75mm dia complete all as specified and directed.

S&F PVC (SWR) pipes,type 'A', single socketed in any length with rubber ring joints laid in trenches or floors 110mm dia complete all as specified and directed.

M&L for PVC (SWR) bends any radius, of size 75mm dia with oval and access door complete all as specified and directed.

M&L for PVC (SWR) bends any radius, of size 110mm dia with oval and access door complete all as specified and directed.

M&L PVC (SWR) branch piece (single Y) equal or unequal of size 75mm dia with access door complete all as specified and directed.

M&L PVC (SWR) branch piece (single Y) equal or unequal of size 110mm dia with access door complete all as specified and directed.

M&L in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges, etc complete all as specified and directed.

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 Sq. cm and over in section and in any position complete all as specified & directed.

Taking down timber roof trusses, coupled rafters or trussed beams clear span above 4 metres & upto 8 metre complete all as specified and directed.

S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters fixed with angle cleats or other connecting plates Fe-410W(GdeE-250) quality B complete all as specified and directed.

M&L roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410W(GdeE-250) quality B complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, eachscrewed end to be fitted with washers and one hexagonal or square nut,length of bolt exc 22.5cm and n exc 30cm and diameter of neck 16mm to 20mm complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat back of size 580x 450mm including 32mm dia PVC waste pipe CP brass wast coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as specified and directed.

S&F in repair vitreous China wash down water closet (pedestal pattern) white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and including CP jet nozzle for EWC including connection to GI pipe line complete all as specified and directed.

S&F in repair WC Orissa pattern white with integral foot rest 580 x 440 mm including, PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.

S&F in repair PVC (SWR) P trap 110 mm bore complete all as specified and directed.

S&F in repair PVC (SWR) S trap 110 mm bore complete all as specified and directed.

S&F in repair PVC low level flushing cistern, 10 ltrs capacity, white, with inlet ball value, float valve and handle including brackets, CP brass flush pipe and bend complete all as specified and directed.

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repair bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe, suitable for 15 mm bore complete all as specified and directed.

S&F in repair stop valve cast copper fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure with capstan head suitable for 15 mm bore, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair pillar tap 15 mm dia cast copper alloy fancy tpye with capstan heads chromium pleted screwed down high pressure with or without lettered Hot or Cold with long screwed screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

M&L prepolished, machine pressed chequred cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with mixer of white cement & pigment as in floors / pavements / paths. paths laid over screed bed or bedding layer in cement mortar 1:4, 20 mm thick for laying floor finishes complete all as specified and directed.

M&L 25 mm thick cement concerte 1:2:4, type B-1(using 20 mm graded stone aggregate) as in leveling of sub base complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, light fitting etc removing materials to store for keeping in safe custody for taking credit or reuse serviceable fittings/fixtures and making good the disturbed surfaces of wall/floors complete all as specified & as directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as above item No-93 but one socket out let 3/5 pin, 5/6 Amps controlled by one 1way switch on independent board but not below the switch board of light points in same vertical plane complete all as specified & directed.

All as per item No-93 here in before but one socket out let 3/5 pin, 5/6 Amps controlled by 1 one way on the same board with other switches complete all as specified & directed.

All as per item No-93 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item No 93 to 96: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches, sockets, regulators, lamp holders, light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed. Make: Anchor Cat No.38058 or equivalent as approved by GE.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed. Make: Anchor Cat No.39991 or equivalent as approved by GE.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed. Make: Anchor Cat No.38320 or equivalent as approved by GE.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed. Make: Anchor Cat No.39994 or equivalent as approved by GE.

S&F for ceiling rose surface bakelite 62.5 x 25 mm size 3 terminals complete all as specified and directed. Make -Anchor CAT Part No-39072 or equivalent as approved by GE.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed. Make: Anchor Cat No. 39797/ 39800 or equivalent as approved by GE.

Supply & fix rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed. Make: Anchor Cat No.38284/38660 or equivalent as approved by GE.

Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts IK-08 As per IEC 61439-3 complete all as specified & directed. Make:- Legrand cat part No- 6078 41 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed. Make :- Havells cat Part No. LHLDDEEEML8R015 or equivelant model of Baja/Wipro/CG.

Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No-LUMILINEPLUSBS20WLED865SPCSS,Phillips cat part no BN021C LED20S PSU CW GR S2 or equivalent as approved by GE.

Supply & fix surface/ ceiling mounting type 34 watt LED luminaire PLUTO NEO PENAL 2X2 environmental friendly new generation aesthetically ultra modern recess mounting with high brightness SMD LEDs as light source with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- PLUTONEOPLR34WLED857S or equivalent model of make ,Philips/Bajaj/ Crompton Greaves as approved by GE.

Supply & fix outdoor security light LED 30 watt luminaire white powder coated with extruded grey aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- ENDURAPEARLNEOSL40WLED757PASYTOPC,Phillips cat part no BRP052 LED 036 CW HP SLA FG S1 PSU GR or equivalent as approved by GE.

Supply & fix surface mounting type bulkhead 10 watt LED luminaire ENDURA RUGBY NEO IP 65 environmental friendly, altra modern energy saving , decorative oval comprising of high brightness LEDs, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make:- Havells cat part No- Cat part No FT10WLED857SSYMBOPC or equivalent model of make Philips/ Bajaj/ Crompton Greaves as approved by GE.

Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor complete all as specified & as directed.

M&L sub main wiring of two single core PVC insulated unsheathed stranded copper conductor cables of size 6 Sqmm, 1100 volts grade drawn through and including 20mm dia PVC concealed conduit of 1.2 mm wall thickness including all fixing accessories, and 4 sqmm PVC insulated stranded copper conductor cable as earth wire(green colour) connected to earth dolly complete all as specified and directed. (Phase-Red, Neutral – black in colour of cable) Note:- Both running cables including earth wire shall be measured & paid for as single length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 2.5 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Taking down distribution boards any size any type including MCB / Isolator / TPN/SPN / SP etc and making good the disturbed surfaces complete all as specified & as directed.

Supply and fix MCB DB 4 way sheet metal enclosure triple pole and neutral 415 volts with 100 Amp standard copper bus bar IP-43, IK-09 with metal doors of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mouting type double door factory fabricated complete as per IEC 61439-3 without MCB but with enclosue blank plate complete all as specified and directed . Make:- Legrand CAT No.5076 70 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply and fix MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed. Make:- Legrand Cat Part No. 507611 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply & fix Isolator TPN, 4 Pole, 415 Volts, 50 Hz AC Supply , 63 Amps, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4065 20 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply & fix Isolator SPN, 40 Amps, 240 volts, 50Hz, IP-20 as per IEC 60947-3 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 406501 or equivalent model of make ABB/ L&T/ Schneider as approved by GE.

Supply & fix MCB SP, 40 to 63 Amps, 'B' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4085 96 to 4085 98 or equivalent model of make Siemens/ Schneider as approved by GE.

Supply & fix MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. Make:- Legrand CAT No. 4085 87 to 4085 95 or equivalent model of make Siemens/ Schneider as approved by GE.

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

Supply & fix PVC body exhaust fan 200mm sweep complete all as specified & directed. Make : Havells ventile Air DX 200 mm or equivalent make of USHA/Khaitan/BAJAJ as approved by GE

M&L for electrically disconnecting and taking down existing ceiling/Exhaust fans from any hight or in any position from existing bldg and keeping in safe custody for reuse at site after necessary repare/ servicing & painting with one coat of synthetic enable paint and writing of MES/identification No. of fans and re hanging/ re-fixing in original position but including replacement of three cor flexible copper conductor cable from ceiling rose to fan connector block of soze 0.75 Sqmm and hanging fan clamps, nuts, bolts and rubber reel bush etc & testing for proper functioning complete all as directed.

MOHAN LAL GUPTA

Om shri sain ram enterprises