Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.0 LAccepted-Finance 3 605 G F 105 SECTOR 3 VASUNDHARA GHAZIABAD UTTAR PRADESH 201012 | GHAZIABAD | UTTAR PRADESH | 201012 | L1 | Accepted-Finance L1 | |
| 2 | L2₹26.6 L+₹60,986 (2.35%)Accepted-Finance | L2 | Accepted-Finance L2 | |
| 3 | L3₹32.1 L+₹6.1 L (23.5%)Accepted-Finance | L3 | Accepted-Finance L3 | |
| 4 | L4₹36.4 L+₹10.5 L (40.3%)Accepted-Finance H NO 138 SHANTI NAGAR NEAR REAL PUBLIC SCHOOL VIJAY NAGAR GHAZIABAD UTTAR PRADESH 201009 | GHAZIABAD | UTTAR PRADESH | 201009 | L4 | Accepted-Finance L4 |
| Sl No | Description | Qty | Unit | AAYANSH ELECTRICAL SOLUTIONS L2 | M/s Ashu Brothers L3 | Yash Contractor L4 | Singh Heavy Electricals L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Carriage of all petty material / LT Cable of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km) | 10 | Qtl. | 450 ₹4,500 Lowest | 500 ₹5,000 | 1,000 ₹10,000 | 2,500 ₹25,000 |
| 2.00 | Carriage of PCC Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km). | 4 | Nos. | 1,299 ₹5,196 | 1,000 ₹4,000 | 2,000 ₹8,000 | 850 ₹3,400 Lowest |
| 3.00 | Carriage of 250 KVA.capacity transformer from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km). | 2 | Nos. | 4,500 ₹9,000 | 5,500 ₹11,000 | 4,500 ₹9,000 | 2,000 ₹4,000 Lowest |
| 4.00 | Erection of double pole structure on PCC Pole 11 mtr. Long with all accessories on following pole fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge. | 2 | Nos. | 4,500 ₹9,000 Lowest | 6,500 ₹13,000 | 11,000 ₹22,000 | 8,000 ₹16,000 |
| 5.00 | Safely installing the New 250 KVA capacity transformer with the help of crane/manual labour at LT Sub-Station Double Pole/Plinth, as per direction of site incharge. | 2 | Nos. | 4,500 ₹9,000 | 5,000 ₹10,000 | 4,500 ₹9,000 | 3,000 ₹6,000 Lowest |
| 6.00 | Laying of LT PVC 1x400 Sq.mm. Cable and complete work properly, as per RESPO/Norms, and as per direction of site incharge.(Rate will be charge as per actual length of work). | 120 | mtrs | 10 ₹1,200 Lowest | 50 ₹6,000 | 190 ₹22,800 | 165 ₹19,800 |
| 7.00 | Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge. | 4 | Job | 380 ₹1,520 Lowest | 500 ₹2,000 | 1,500 ₹6,000 | 750 ₹3,000 |
| 8.00 | Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge. | 4 | Job | 200 ₹800 | 150 ₹600 Lowest | 1,100 ₹4,400 | 750 ₹3,000 |
| 9.00 | Grouting of PCC Pole 11 mtr. Long supports in CC 1:3:6 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge. | 4 | Nos. | 1,250 ₹5,000 | 800 ₹3,200 Lowest | 2,000 ₹8,000 | 1,450 ₹5,800 |
| 10.00 | Construction of T/F plinth suitable for 160/250/400 KVA T/F (size of 2 x 2 x 1.5 mt.) as per drawing, cc work in foundation in ratio 1:3:6 (Cement, Sand & Brick ballast). Ist class brick work in side walls cc ratio of 1:4 (cement & fine sand). 12mm thick plaster in ratio 1:4 (cement & fine sand). The RCC work on top of plinth in ratio 1:2:4 after duly filling of brick ballast inside the plinth & ramming the same, including cost of all material & labour, as per direction of site incharge. | 2 | Job | 31,000 ₹62,000 | 35,000 ₹70,000 | 25,000 ₹50,000 | 22,500 ₹45,000 Lowest |
Tender Value
₹27.9 L
EMD Value
₹27,940
Closing Date
27 Sept 2025, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SUPERINTENDING ENGINEER
SUPERINTENDING ENGINEER EDC HAPUR
ADDITIONAL DISTRIBUTION TRANSFORMERS OF VARIOUS CAPACITIES AND OTHER PROTECTION WORK UNDER BUSINESS PLAN 2025-26. 25 WORK IN THE AREA, JURISDICTION OF EDD-PILAKHUWA, UNDER EDC., HAPUR.
2025_PVVNL_1071575_1
29(W)/EDCH/2025-26
Open Tender
Electrical Works
Item Rate
HAPUR
Please refer Tender documents.
2 documents required · 2 mandatory
₹3,540
SUPERINTENDING ENGINEER, EDC, HAPUR
₹27,940
Yes
4 Oct 2025
5 Sept 2025
27 Sept 2025
5 Sept 2025
27 Sept 2025
5 Sept 2025
Amount
Carriage of all petty material / LT Cable of estimate, from Electricity store center, Hapur to 33/11KV Sub-Station/site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/Bulandshar (0-50 Km)
Carriage of PCC Pole 11 mtrs. Long from Electricity store center, Hapur/J.E. Store to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km).
Carriage of 250 KVA.capacity transformer from Electricity store center, Hapur to site of work with loading and unloading at both ends on Kachha Packka road, as per direction of site incharge from JE Store/Store center Hapur/Ghaziabad/ Bulandshar (0-50 Km).
Erection of double pole structure on PCC Pole 11 mtr. Long with all accessories on following pole fabrication and fixing of M.S. Top & Dropper Channel, M.S. T/F Angle, E-Bracket, 11 KV Pin insulator with Pin, Disc Insulator with Disc fitting etc., as per RESPO Drawing/Norms by providing all clamps made of M.S. Flat of size 50x6 mm with proper size nuts and bolts, and jumpering etc work, as per direction of site incharge.
Safely installing the New 250 KVA capacity transformer with the help of crane/manual labour at LT Sub-Station Double Pole/Plinth, as per direction of site incharge.
Laying of LT PVC 1x400 Sq.mm. Cable and complete work properly, as per RESPO/Norms, and as per direction of site incharge.(Rate will be charge as per actual length of work).
Grouting & fixing of stay rods (20x1800)mm including all work of excavation, cement concrete in size (0.60x0.60x0.30)m in ratio 1:4:8 cement, sand, 40mm brick ballast as per drg. Including back filling, proper ramming etc and fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing as per RESPO Drawing/Norms by providing all grouting material and stay clamp made of M.S. Flat of size 50x6mm with proper size bolts & nuts & loops, as per direction of site incharge.
Earthing of supports with MS earth Rod of (20x2500)mm long including excavation of pit and driving M.S. Rod 3.0 M apart from support and 0.5m below the ground level and connection below the earth electrodes with the help of G.I. wire & earthing lugs as per RESPO Drawing/Norms by providing proper size nuts & bolts, as per direction of site incharge.
Grouting of PCC Pole 11 mtr. Long supports in CC 1:3:6 (Cement, sand & 40mm brick ballast) Grouting will be done in the block of size (450x450)mm x1/6th of full length of the support, up to ground level, 300mm plinth above the ground level with CC 1:3:6 (Cement, core sand and Stone grit) with mufting as per drawing, work includes back filling & proper ramming by providing all required grouting materials, as per direction of site incharge.
Construction of T/F plinth suitable for 160/250/400 KVA T/F (size of 2 x 2 x 1.5 mt.) as per drawing, cc work in foundation in ratio 1:3:6 (Cement, Sand & Brick ballast). Ist class brick work in side walls cc ratio of 1:4 (cement & fine sand). 12mm thick plaster in ratio 1:4 (cement & fine sand). The RCC work on top of plinth in ratio 1:2:4 after duly filling of brick ballast inside the plinth & ramming the same, including cost of all material & labour, as per direction of site incharge.
Erection & Fixing of 11KV. Fuse set on STP/PCC Pole, by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge. (Only Fuse Set and required Angle/Channal will be provided by the Department.
Erection & Fixing of 11KV. TPMO set on STP/PCC Pole, by providing all required fixing materials as per RESPO/Norms and as per direction of site incharge. (Only TPMO Set with required angle/channel will be provided by the Department).
Construction of safety fencing (MS) size 3x3x2 mtr. for Transformer 11/0.4 KV Sub Station, With supply of material required for MS fencing (50X50X3 MM) M.S. wire mesh construction utilizing vertical post duly grouted/fitted in ground/on floor. Horizontal angle/T-iron to be fitted on vertical posts. Pickets (if required) fitted to rail and gate to facilitate entry and exit. The vertical Posts/Horizontal post shall be made of M.S. angle 75x75x6mm. Such post shall be kept preferably at distance of 800-1000 MM. and shall be grounded with CC ratio 1:4:8. The length of vertical post shall be sufficient to take care of fencing as requirement at site, and as per direction of site incharge.
Providing & Fixing of Danger Board, including fixing of all accessories by providing all required materials (like suitable clamps, nuts & bolts etc.) as per RESPO/Drawing Norms and as per direction of site incharge.
Providing and installation of maintenance free multifaceted proactive and corrosion free chemical earthing electrod size 80mm x 3000mm complete with 50KG backfill compound with all required accessories for Body/neutral earthing of Transformers, including cost of M.S. earth strip for connection the earth strip will be welded to the earthing and neutral support, as per RESPO/Norms and as per direction of site incharge.
Jumpheing work of LT/HT line for proper energization of line.
Providing and fixing copper L Piece proper size at both end LT Cable as per direction of site incharge
Copper L Piece 50x225x10 mm
Copper L Piece 62x225x12 mm
Providing and fixing of Aluminium Lug suitable for 250/400/630 KVA D/T at and direction of site incharge.
Providing and fixing of LT incoming Panal with 3 Phase 440 volt, 300 Amp MCB, as per RESPO/Norms and as per direction of site incharge.
Providing, Laying and fixing copper control cable 4x2.5 Sq.mm. as per RESPO/Norms and as per direction of site incharge.
Providing, Laying and fixing copper control cable 6x2.5 Sq.mm. as per RESPO/Norms and as per direction of site incharge.
Providing & Fixing of G.I. pipe 6"dia Class-B over 11KV/33 KV XLPE cable before mounting the cable at double pole. The work includes fitting of clamps, sealing of top and bottom of pipe and one end of pipe is to be burried under earth about 500mm earch including mounting and clamping the cable on double pole structure and making connection with overhead line at both ends, as per direction of site incharge.
Providing and fixing LT MCB with 3 Phase 440 volt 300 Amp box as per RESPO/Norms and as per direction of site incharge.
Laying, Stringing and final sagging of ACSR Weasel Conductor as per RESPO/Norms and as per direction of site incharge.
Erection & Fixing of 33 KV Lighting Arrester where include making all connections & Alignment with all required nut bolt, clamp, lug, connector etc for safe and proper opration.
Providing and fixing 33 KV Relay as per RESPO/Norms and as per direction of site incharge. (ABB, C&S, Ashide Make)
Erection & Installation earthing of support with earth wire (6/8 SWG) as per RESPO/Norms and as per direction of site incharge.
Fixing of lighting Arrester (LA) 11 KV for DT with 50x6 mm MS Strip, Nut bolt will be provided by contractor only LA GI wirewill be provided by department as per RESPO/Norms and as per direction of site incharge.
AAYANSH ELECTRICAL SOLUTIONS (BID ID -5567167)
M/s Ashu Brothers (BID ID -5567283)
Yash Contractor (BID ID -5567368)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .