Modernization of Rural Link roads falling in MC Patti Assembly Constituency Patti District Tarn Taran under Special Assistance Project Phase-II Year 2025-26 including 5 Years Maintenance1Year Defect LiabilityPeriod plus 4Years Maintenance Group No.2

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: EXECUTIVE ENGINEER CONSTRUCTION DIVISION,

Tender Inviting Authority: EXECUTIVE ENGINEER CONSTRUCTION DIVISION,NO.2, PWD B&R, AMRITSAR.

Name of Work: DNIT for Modernization of Rural Link roads falling in MC Patti, Assembly Constituency Patti, District Tarn Taran under Special Assistance Project Phase-II Year 2025-26 including 5 Years Maintenance (1 Year Defect Liability Period + 4 Years Maintenance) Group No.2 1.Patti to Sirhali Mandan via Kandiala, 2) Kiriyan to Marhana Kambo Dhaiwala road, 3) Harike Khalra Road to Burj Pula Booh Road via Gurdyal Singh Da Bhatta, 4) Nadohar to Abadi Bikar Singh via Sheller,5) ATTSH road to Dhattal along Distributry, 6) Booh Kutiwal road to Kutiwal Sabhra road, 7) NH-54 to Old Amritsar Harike Road, 8) Dhagana Railway Station to Shaheed Boparai Road,9) Talwandi Sobha Singh to Tut, 10) Jotishah Sabhraon road (Langar Baba Bidhi Chand) to Abadi Baba Kundan Singh Jathedar, 11) Sabhraon Kirtowal road to Dhusi Ban via Abadi Master Hazara Singh, Gurdit Singh, 12) Sabhraon Kirtowal road to Dera Baba Sher Singh

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Work Name Item Code / Make Quantity Unit Rate Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT in Rs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words

1 Dismantling brick edging in strengthening portion as per CSR item No.8.5(i) 1 192.36 cum 144.33 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

2 Making 50 mm x 50 mm furrows 45 degree to the center line of the road and at one meter interval in the existing bituminous wearing coarse including sweeping and disposal of excavated material within 1000 meters lead complete as per technical (Full surface area will be measured for payment). CSR 24.10 2 6997 sqm 5.27 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

3 Kassi work undressed involving an average horizontal throw up to 2.0 metres and an average vertical lift up to 0.5 metres including breaking of clods. CSR 6.2 (a) 3 3846.75 cum 81.12 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

4 Compacting of earth work & preparation of sub grade including loosening and leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering rolling with a road roller and compacting the bed to achieve minimum dry density as given in table 300-2 as per technical clause 305 of MORT&H specification. 4 56037 sqm 6.32 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

5 Providing & laying of Brick on end edging 6.83cm wide, 11.11cm long and 22.86 cm high half brick deep including excavation, refilling and disposal of surplus earth upto 50mtr. Complete as per Punjab PWD specifications complete as per CSR 24.16 (add difference of bricks rate) 5 29000 rmt 92.05 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

6 Construction of granular sub-base by providing material as per grading-III (Table 400-I of MORT&H 5th revision), mixing in a mechnical mix plant at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications 6 4260.75 cum 1826.41 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

7 Providing, laying, spreading and compacting stone aggregates of Grading I to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications. 7 4558.21 cum 2061.44 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

8 Providing, laying, spreading and compacting stone aggregates of Grading II to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheeled roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density complete as per technical specifications. 8 4244.75 cum 2061.39 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

9 Providing and laying surface dressing in single coat using crushed stone aggregates of specified size on a layer of bituminous binder VG-10 @ 1kg per sqm laid on prepared surface after cleaning the road surface and rolling with 8-10 tonne smooth wheeled steel roller complete as per technical clause 509 of MORT&H specifications. 9 56596.16 sqm 84.14 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

10 Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications. 10 88962.04 sqm 23.12 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

11 Providing, laying and compaction of open - graded premix surfacing of 20 mm thickness consisting of crushed stone aggregates of specified grading premixed in a Continuous type hot mix plant with bituminous binder VG-10 @ 1.46kg per sqm, laid with Paver Finisher Mechanical and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades complete as per technical clause 510 of MORT&H specifications. 11 3733.21 M.T. 3520.12 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

12 Providing and laying of premix sand seal coat premixed in Continuous type hot mix plant using specified fine aggregates and penetration grade bitumen VG-10 @ 0.68kg per sqm, laid to the specified levels, grade and cross fall complete as per technical clause 511 of MORT&H specifications 12 898.62 M.T. 5874.6 Excess(+) Full Conversion INR 1.01 Supplying, Conveying and fixing spls. Including eart item1 123.223 Nos

13 Providing and making rumble strips 15-20mm high at centre, 250mm wide placed at 1m centre to centre over freshly laid bituminous layer by using close graded premix surfacing material type B at approved locations to control speed and marked with 100mm wide white strips of thermoplastic road marking paint. The close graded premix surfacing material type B shall conform to technical clause 512 and thermoplastic road marking paint shall conform to technical clause 803 of MORT&H specifications 13 877 mtr 108.31 Excess(+) Full Conversion INR

14 Dresing of Earth work as per CSR 6.3 (i) 14 20335 sqm 1.3 Excess(+) Full Conversion INR

15 Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials. In area of Light Jungle (By Mechanical Means) CSR 24.2 (c) 15 1.23 Ha. 35291.87 Excess(+) Full Conversion INR

16 Excavation in Soil (any type) using Hydraulic Excavator CK 90 Excavation with hydraulic excavator of 0.9 cum bucket capacity including cutting trimming bottom with side slopes, in accordance with requirements of lines, grades and cross sections including all lifts and combined lead up to 60 mtr. 16 2260.13 cum 33.71 Excess(+) Full Conversion INR

17 Scarifying existing bituminous surface to a depth of 50 mm by mechanical means (Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.) complete as per technical clause 404 of MORT&H specifications 17 12505 sqm 5.27 Excess(+) Full Conversion INR

18 Construction of embankment with earth obtained from roadway cutting or excavation including spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 305 of MORT&H specifications 18 2260.13 cum 99.03 Excess(+) Full Conversion INR

19 Construction of Shoulder with good quality earth obtained from borrow pits including compensation of earth, loading, unloading, carriage to site of work, spreading, grading to required slope and compacting to meet requirement of table 300-2 as per technical clause 3003 of MORT&H specifications. 19 5119.87 cum 376.96 Excess(+) Full Conversion INR

20 Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.40 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical specifications. For BM 20 23831 cum 23.12 Excess(+) Full Conversion INR

21 Providing and laying Bituminous Macadam 50mm to 75mm thick with Continuous type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @3.4%, laid over a previously prepared surface with paver finisher Mechanical to the required grade, level and alignment and rolled to achieve the desired compaction complete as per technical clause 504 of MORT&H specifications. Notes:- I. The actual volume of the aggregate to be paid for shal lbe computed after deducting the specified percentage from the volume computed by stacks measurement as per MORT&H 5th Revision specifications (addendum to latest revision) for the purpose of secured advance. II. The final grading for the aggregates requiredfor bitumenious macadam course Grading-2 for 75mm /50mm thickness of each layer conforming to table 500-7 of MORT&H 5th Revision specifications (addendum to latest revision) shall be determined after getting the bituminous macadam grading-2 designed from Punjab PWD B&R Research Laboratory Patiala after obtaining 60% of material. The design mix so finally approved by shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set fourth in table 500-6 (addendum to latest revision). 21 1191.57 cum 7872.66 Excess(+) Full Conversion INR

21.1 III. The mix shall exhibit the following details: a) Binder expressed as a percentage by weight of total mix. b) Coarse aggregate of 26.5mm gauge expressed as percentage by weight of total mix. c) Crushed Bajri of 11.2mm size expressed as percentage by weight of total mix. d) Fine aggregates 4.75 mm below expressed as percentage by weight of total mix. e) A single definite percentage passing each sieve for mixed aggregates. f) Density of Bituminous Macadam (75mm /50mm thick after compaction) shall be minimum 2.2 gms/C.C & nothing extra shall be payable if higher density is achieved at site. IV) The contractor thereafter, shall be required to complete the supply of various ingradients or Bituminious Macadam as per proportions stipulated in the approved mix. V) Rate of B.M. shall be quoted by the contractor with respect to binder content percentage by weight of mix being 3.4% if Laboratory designs a mix with different percentage then the difference shall be payable/recoverable. 22 2 Construction of chamber for 100mm sluices valve item3 10 Nos

22 Construction of 1.5 feet Hume Pipe culvert (24 feet formation width) complete in all respect. 23 58 Each 69664.83 Excess(+) Full Conversion INR

23 Construction of 2.5 feet Span Slab Type culvert (24 feet formation width) complete in all respect. 24 3 Each 165661 Excess(+) Full Conversion INR

24 Construction of 10 feet Span Slab Type Culvert (24 feet formation width) complete in all respect. 25 3 Each 674362 Excess(+) Full Conversion INR

25 Construction of 1.5 feet Hume Pipe culvert (32 feet formation width) complete in all respect. 26 12 Each 80060.75 Excess(+) Full Conversion INR

26 Construction of 2.5 feet Span Slab Type culvert (32 feet formation width) complete in all respect. 27 3 Each 203635.33 Excess(+) Full Conversion INR

27 Road Marking with Thermoplastic Compound: Road marking with hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 0.25kg per sqm area as per IRC:35 1997 complete as per technical clause 803 of MORT&H specifications CSR 24.57 28 4853.36 sqm 649.66 Excess(+) Full Conversion INR

28 Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or Glass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications. 29 4200 Each 256.75 Excess(+) Full Conversion INR

29 Reinforced cement concrete M-15 grade ordinary kilometer stone of standard design for village roads as per IRC 8-1980 fixing in position including painting and printing etc. complete as per technical clause 804 of MORT&H specifications. CSR 24.37 c 30 24 Each 2763 Excess(+) Full Conversion INR

30 Reinforced cement concrete M-15 grade boundary pillars of standard design as per IRC 25-1967 fixing in position including painting and printing etc. complete as per technical clause 806 of MORT&H specifications. CSR 24.39 31 190 Each 1371.82 Excess(+) Full Conversion INR

31 Reinforced cement concrete M-15 grade village board of standard design fixing in position including painting and printing etc. complete as per PWD specifications. CSR 24.40 32 25 Each 5498.32 Excess(+) Full Conversion INR

32 Providing and fixing Cautionary Sign Board (600 x 600 x 600mm) tringular and definition plate 600 x 200mm rectengular as per CSR item no. 24.44 b (i) + 24.49 b 33 148 Each 3964.51 Excess(+) Full Conversion INR

33 Place Identification sign board 900 x 600mm rectangular as per IRC 67-2001 with retro reflective high intensity microprismatic grade sheeting fixed over 2mm thick aluminium sheet C.S.R. 24.47 b 34 134 Each 6921.4 Excess(+) Full Conversion INR

34 Advance Direction sign board 1200x900mm rectangular per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012. grade sheeting fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on two square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground in foundation concrete M-25 of size 0.60x0.60x0.75m for vertical post complete as per clause 801 of MORT&H specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting & a certified copy of test reports from an independent test laboratory conforming to clause 6.7 of IRC 67-2012. CSR 24.48 b (i) 35 2 Each 11917 Excess(+) Full Conversion INR

35 Credit of Bricks Bats 36 96.19 cum 531 Excess(+) Full Conversion INR

36 Credit of Bricks 37 27700 Each 2.63 Excess(+) Full Conversion INR

37 Provision of Videography of Road 38 12 Each 1000 Excess(+) Full Conversion INR

38 Add extra cost of Cutlural Cess @ 1% on Total cost as items mentioned above on 1 to 37 i.e. Rs.81214623.99 39 Percentage 0.01 Excess(+) Full Conversion INR

39 Add Maintenance Cost 40 2 Construction of chamber for 100mm sluices valve item3 10 Nos

39.1 2nd Year Mantenance 41 23.55 km 41118.51 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

39.2 3rd Year Maintenance 42 23.55 km 60644.2 Excess(+) Full Conversion INR 2 Construction of chamber for 100mm sluices valve item3 10 Nos

39.3 4th Year Maintenance 43 23.55 km 94761.49 Excess(+) Full Conversion INR 3 Supplying, Conveying and fixing spls. Including ea item4 10 Nos

39.4 5th Year Maintenance 44 23.55 km 119684.84 Excess(+) Full Conversion INR 4 Construction of chamber for 100mm sluice plates item5 10 Nos

40 Add extra cost of Cutlural Cess @ 1% on Total cost as items mentioned above on 39.1 to 39.4 i.e. Rs.7446722.89 Note:- 1) Routine Maintenance for four year's (2nd to 5th year) is a fixed amount, Contractor will Quote his rate (Percentage) below or above only for Part I i.e. Construction Cost of BOQ. 2) Routine maintenance of roads, there is Lump Sum provision for each year of maintenance, the payment should be made for actual work done at site Measured in M.B by concerned Engineer. 45 Percentage 0.01 Excess(+) Full Conversion INR

Total in Figures 4 Construction of chamber for 100mm sluice plates item5 10 Nos

Quoted Rate in Figures Select

Quoted Rate in Words