GE (N) P/TOKEN- 60 OF 2020-2021 PROVISION OF CERTAIN LBW, RW, MW AND SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and as directed.

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance exceeding 250m and not exc.500metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling, sub base and mass concrete etc. complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in lintels upto 1.5m clear span, seismic and other similar bands, cills, plinth courses, roof kerbs, parapets, coping, benching, coping, hold fast blocks, bed blocks/ bed plates, kerbs for interlocking tiles etc. including weathering, slightly rounded or chamfered angles and throating including necessary form work all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L filleting in any position and to any shape in CM 1:3 including all miters, stops etc. section of fillet exc 25 and n.exc 50.00 Sqcm complete all as specified and directed.

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4) over and including 10mm thick backing coat in cement mortar (1:3), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite/ green marble slab complete all as directed.

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Par-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 30mmx 4mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick wood grain printed PVC sheets and edges will be painted to match with printed sheet, reinforced with mild steel square tube complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for 150 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws (conforming to the sample kept in GE office) complete all as specified and as directed.

Supply and fix for 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.

Supply and fix for 100mm size mild steel butt hinges, heavy weight, cold rolled and fixed complete (conforming to the sample kept in GE office) all as specified and as directed.

Supply and fix in reapir, 300mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised fixed with stainless steel screws complete (conforming to the sample kept in GE office) all as specified and as directed.

S&F in repairs stainless steel single towel rail 600mm long including built in side brackets ,Cat No. ACN-1111SM of make Jaquar ‘Continental' Series or equivalent of Make as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed

Supply and fix for galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 11 to 15mm complete all as specified and as directed

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, column posts, wind ties, fixed with angle cleats or other connecting plates, drilled for fixing all as specified and directed.

Supply and fix for mild steel work in tubular trusses, main columns, posts, for structural work including special shaped washer etc. complete using hollow mild steel sections of square or rectangular tubes conforming to IS: 4923-1997 grade St.-240 fixed with angle cleats or other connecting plates complete all as specified and as directed.

Supply and fix for pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, as per ISI mark, complete all as specified and as directed .

Supply and fix for aluminium anodised powder coated louvered ventilator with provision of exhaust fan opening with adjustable louvers using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for aluminium powder coated partition using ‘Jindal’ aluminium SP/ DP section or equivalent make as specified with 5mm thick tinted/ black glass, PVC rubber beading,12mm thick prelaminated particle board fixed with glazing clips etc complete all as specified and as directed. Sections : SP (Single partition) - 20033, DP (Double partition) - 20034,Glazing clips - 4407

Supply and fix for powder coated aluminium double leaf, two panels, openable door , 5mm thick plain glass panes fixed with garware sun control film, fixed with rubber beading and glazing clips, alongwith supplying and fixing aluminium body hydraulically regulated door closer, designation No 2 universal type, suitable for sheet width 701 to 850mm of weight between 36 to 80 kg , mortice door lock, handle, tower bolt 200mm (02 Nos.), aluminium sliding bolt using aluminium sections all as specified and directed. Note :- Catlouge numbers of Jindal or equivalent company. (i) Top-19528 (ii) Middle-19575 (iii) Bottom-19530 (iv) Vertical-19526 (v) Glazed clips section No. 19381 and 19352 (vi) 1'' interlock (20939) (vii)1'' handle(20602) .

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet tile profile of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Taking down & removing old water proofing treatment of any description including plaster and cleaning the surfaces of slab with wire brushes, removing dust, foreign materials including flushing at junctions of wall and removing the rubbish off the premises to a distance exc. 500 m & n exc 1.5km all as specified and as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by steps of treatment as under:- (a) 10mm thick rendering in cement mortar (1:3) mixed with integral water proofing compound as per manufacturer's instructions on roof slab finished even and fair. (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.40 ltr/Sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker shall be applied. (b) Over this primered surface one coat of hot blown bitumen of 85/25 shall be applied @1.20 kg/Sqm (b) APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid over the hot bitumen to make it sandwitched with bitumen on roof surfaces (c) Apply two coats of bituminous aluminium paint. (e) the overlap of APP shall be done with torch application, a minimum overlap of 150mm shall be made at the end and 100mm shall be made at the longitudinal sides of the polymeric membrance respectively and sealed all ovelaps and joints as per Manufacturers instructions.

(Notes: (i) The contractor/Company shall furnish 10 years performance warranty as per manufacturer of material (ii) The work should be done by a company recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist. (iii) Supply only of waterproofing compound shall be measured and paid separately under relevant item).

Material and labour for 12mm to 12.5mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.5mm x 23.5mm x 1.5 mm thick main tee, 25 mm x 23.5 mm x 1.28 mm cross tee and 25mm x 23.5mm x 1.2mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE). Height of ceiling is above 5 metres.

Material and labour for Machine cut kota stone slab 18 to 20mm thick in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including screed bed 20mm thick in cement mortar (1:6), including rubbing and mirror polishing complete all as specified and as directed.

Material and labour for MAchine cut kota stone slab 20 to 25mm thick as in vertical surface such as skirting and dado, jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including backing coat of 10mm thick in cement mortar (1:4), including rubbing and mirror polishing complete all as specified and as directed.

M & L machine cut cudappah stone slab 20-25mm thick as in lintels, shelves, vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab or arldite including rubbing and polishing complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection finishing the surface even and smooth without using extra cement including cutting grooves 10mm x 30mm deep at every 3.0m interval and filled with mastic filling comprising 1 part of mastic bitumen and 3 parts of sand (all by weight) complete all as specified and as directed.

Material and labour 50mm thick PCC (1:3:6) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 75mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 25mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in floor topping finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 40mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in floor topping finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregates) as in roof padding, flooring using water proofing compound as per manufacturer's instruction complete all as specified and as directed. (Note: Supply only of waterproofing compound shall be measured and paid separately under relevant item).

Material and labour for coloured glazed ceramic tiles of minimum size 300mm x 200mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11sq.m but not exceeding 0.18sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured, glazed ceramic tiles, of size 600mm x 300mm x 9 to 10mm thick as in vertical surface, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured, glazed ceramic highlighter tiles, of size 600mm x 300mm x 7 to 8 mm thick as in vertical surface, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete coloured interlocking tiles, paver block, glossy, any shape and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile including vibrating with surface vibrator after laying of tiles complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

M&L for 25mm thick coloured Glossy Chequered cement concrete tiles of area exc. 0.08 Sqm and n.exc 0.16sqm each, set, jointed and pointed in net cement slurry mixed with grey cement and pigment in floors including 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for rendering 10mm thick in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces and provn of sagol finish complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing of walls, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar on fair faces of brick or concrete surfaces in two layers i.e. Ist layer of 10 mm thick rendering in cement mortar (1:4 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with integral water proofing compound as per manufacturer's instructions with second layer, finished even and smooth without using extra cement complete all as specified and as directed. (Note: Supply only waterproofing compound will be measured and paid separately).

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for complete removal of existing finish /treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc. and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for appying 1.5mm thick cementitious wall care fine putty on walls and appying one coat of alkali resistant primer on walls complete all as specified and as directed.

Material and labour for appying one coat of acrylic distemper of approved tint on wall surfaces complete all as specified and as directed.

Material and labour for preparation of old decorative plastered or unplastered surfaces of Ceiling and applying one coat of white wash all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound/ acrylic distemper over a coat of alkali resistant priming paint complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound/ emulsion distemper over a coat of priming paint complete all as specified and as directed.

Material and labour for preparation of old plastered or unplastered wall surfaces by washing, rubbing down and stopping of distempered surfaces and applying two coats of oil bound/ acrylic distemper complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Material and labour for preparation of old treated plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and as directed

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Refixing of 15mm bore steel water tubing with all fittings and fixed to new or old position on walls and ceiling or laid in floors complete all as specified and as directed.

Refixing of 20mm bore steel water tubing with all fittings and fixed to new or old position on walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix in repair bib tap for 15mm bore pipe, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix bib tap for 15mm bore pipe, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repair pillar tap for 15mm bore pipe, cast copper alloy, with capstan heads, chromium plated, cast copper alloy, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed. Make: Jaquar, Prayag

S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix stop valves for 15mm bore pipe, with wall flange, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs for hand shower chromium plated (health faucet), with 8mm dia. 1.2 metre long flexible tube & wall hook, Cat No. ALD-573N of make Jaquar or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs, chromium plated two way bib cock 15mm dia Cat No. CON-041KN of make Jaquar ‘CONTINENTAL' series or equivalent as approved by GE. all as specified and as directed.

S&F in repairs chromium plated toilet roll holder ,Cat No. ACN-1151N of make Jaquar '‘Continental Series' or equivalent of make as per Appx 'A' as approved by GE. all as specified and as directed.

Supply and fix in repairs for brass chromium plated soap dish holder Cat No.ACN-1131N of make Jaquar 'Continental series' or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs brass chromium plated towel ring square with round flange, Cat No. ACN-1121N of make Jaquar 'Continental series' or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as drected.

Supply and fix for 15mm size PVC connection 450mm long including PTMT nuts etc complete all as specified and as directed

Supply and fix in repair for 15mm size PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 50mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down existing unserviceable pipe complete all as specified and as directed.

Supply and fix for PVC (SWR) pipe 40mm bore single socketed in any length with rubber ring joints fixed to walls including taking up/down existing unserviceable pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore with access door complete all as specified and as directed.

Supply and fix in reapir for PVC (SWR) bends any radius of 75mm bore with access door complete all as specified and as directed.

Supply and fix in repair PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.

Material and labour for cast iron Nahani trap, with grating of diameter of outlet 75mm including jointing to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) floor/ nahani trap 75 mm dia of outlet, plain with grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Supply and fix stainless steel grating of 100mm dia complete all as specified and as directed.

Supply and fix for vitreous china, squatting pan, 'Orissa' pattern, complete of size 580 mm x 440 mm, white, with CI 'P' of 'S' trap, front or back inlet and foot rests any pattern, including provision of lime concrete and PVC high level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets including 32mm dia PVC flush pipe and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repairs vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap or 'S' Trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from Cera/Parryware. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix vitreous China urinal full stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, grating and union for discharge pipe complete all as specified and as directed.

Supply and fix vitreous China division plate of size 69cm x 16.5cmx 32.5cm for urinal, white, including providing and fixing plugs, bedding against wall in cement mortar (1:2), securing to plugs with and including 60mm long brass screws, pointing around back in cement paste complete all as specified and as directed. Make: Hindware Cat No. 61001 starwhite or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix for vitreous chinaware wash hand basin, white, flat back, size 550x400 mm, PTMT waste coupling, chain and plug, waste fittings, union and waste pipe 32 mm dia of required length, 15mm dia PVC connection 450mm long including PTMT check nuts and including 15mm piller tap CP all necessary inlet outlet connections including MS brackets including cutting for and pinning in brackets complete all as specified and as directed.

Supply and fix for vitreous chinaware wash hand basin full pedestal, white, flat back, size 560x430x195mm, wall hung basin with fixing accessories set, CP brass waste coupling, chain and plug and porcelain stopper, waste fittings, union and waste pipe 32 mm dia of required length, 15mm dia PVC connection 450mm long including PTMT nuts and all necessary inlet outlet connections (excluding tap) complete all as specified and as directed. Make: Jaquar cat part No. CNS-WHT-811 (basin), CNS-WHT-303 (pedestal), or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix in repairs, stainless steel sink Duet regular double bowl solitaire range made of Stainless Steel grade 304, 1mm thick,Gloss finish, with plug, washers and waste coupling, waste pipe, including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 810mm x 510mm x203mm with bowl size 405mm X 354mm X 203mm all as specified and directed. Make :-Prayag cat No. 1232D or equivalent of Blue Star/ Nirali/ Jain Brothers Sanitation Pvt Ltd (Jayna )as approved by GE. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.

Supply and fix in repair for 10mm thick corner glass of size 30cm X 30cm, with stainlesss steel decorative type railing on front face and fixed with 3 Nos. 'D'type stainlesss steel brackets complete all as specified and as directed.Make: Jaquar cat part No. URS-WHT-132530 or equivalent of makes as per Appx 'A' as approved by GE

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as directed.

Dismantling structural steel work including doors, gates etc. but excluding framed truss etc. complete all as directed.

Dismantling framed trusses, span exc 10m but not exc 15m complete all as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLSH copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, 20 mm dia rigid PVC conduit of white/ ivory/black colour on pressure patti with welding on channel including all accessories in wall/ ceiling/ chanel etc, with GI terminal sunken boxes 1.2mm thick 60mm deep of suitable size as per site requirement, covered with modular white cover plate with frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLSH copper conductor 1.5 Sqmm (nominal area) single core cable as earth continuity conductor and connecting to the common earth dolly for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.134 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.134 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.134 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.134 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.134 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module with neon indicator complete all as specified and as directed.

Supply and fix for modular bell push, 6Amps, 1 module complete all as specified and as directed.

Suply and fix for bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type fan regulator 120 watt 1 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for sheet metal enclosure Vertical TPN, DB, metal door 4 way 415 volts, 50Hz with MCCB incommer and SP/ DP MCBs as out going double door IP 43 with magnetic locking systen, pre-wired including 200 Amps bus bar etc. suitable for operation on 415 volts 50Hz AC supply including necessary provision for inserting the DB in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed. Make: L&T Cat No. DBVTL00DD or equivalent of Legrand, ABB

Supply and fix for MCB SPN rated capacity 40 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCCB, tripple pole and neutral, 415 Volts, adjustable type with thermal magnetic release, with breaking capacity 10KA, Ics = 100% Icu with extended terminal including necessary electrical connections suitable for fixing on DB of capacity 63Amps complete all as specified and as directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body complete all as specified and as directed.

Supply and fix for highly efficient LED bulbs 10W with lumens out put not less than 1000 lumens, used as ready replacement for existing GLS/ CFL direct fit lamp in B-22 cap of make Havells/ Philips/ Wipro/ Bajaj/ HPL as approved complete all as specified and as directed.

Supply and fix for LED 10 watts batten aluminium extruded with decorative end caps all as per Cat No. BCLSB 10 NW/ WH of make Bajaj, Wipro Cat No. LL20-111-XXX-65-NE or its equivallent model in Havells, Philips as approved complete all as specified and as directed.

Supply and fix for energy saving new generation 10 watts LED bulk head fitting IP-65 luminaire with opal diffuser prewired and necessary mounting arrangements, provision of 3 core multistranded copper conductor of size 23/0.193 from ceiling rose with LED bulb all as per Cat No.BIBWP 10W LED of make Bajaj/ Philips Cat Part No WT140LED 7SCW PSU or its equvalent in Wipro/ Havells complete all as specified and as directed.

Supply and fix for wall mounted LED 20watts with lumens out put not less than 2000 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BCLAB 20W of make Bajaj, Cat No. LL20-281-XXX065-ALI of Wipro or equvalent of make Philips/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed.

Supply and fix for recessed mounted low depth LED luminaire 2'x2' square LED panel 43 watts classic design white powder coated CRCA housing with full window acrylic diffuser, operating voltage 140-270 volts, AC, 50 Hz all as per Cat No.BARSQL 43W WH of make Bajaj or equivalent of make Philips/ Wipro/ Jaquar/ Crompton as approved complete all as specified and as directed.

Supply and fix for energy saving new generation environmental friendly long life versatile pressure die aluminium IP-66 for security light fitting luminaire of capacity 25 watt with high power LEDs as light source and electronic driver with lumens out put not less than 2500 lumens, with prewired all as per Cat No. BCLST 25 W LED I of make Bajaj, Philips Cat No. BRP042 or equivalent of make Wipro/ Havells/ Crompton as approved, necessary mounting arrangements and provision of 2.5 Sqmm 3 core copper conductor cable multistranded from ceiling rose to light fitting including 40mm dia 1.5 metres long GI pipe medium grade bracket of suitable shape with clamps made out of MS flat iron of size 40mm x 6mm, nuts, bolts including taking down old existing unsesrviceable tube light fitting complete all as specified and as directed.

S&F ceiling fan (after assembling the same) with fan hook/box, 1200mm sweep BEE 5 star rated, 3 blade ISI marked, white colour, 240 volt AC 50 HZ single phase with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat No. ES-50 or Bajaj cat No. Kessals 50 ISI of equivalent of Usha, Orient Electric kiara shine, Crompton.

Supply and fixing of exhaust fan plastic body of 200mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan including taking down old exhaust fan and depositing to store yard of AGE E/M North Pune complete all as specified and directed. Maqke: Bajaj Cat Part No. Maxma DX 8" or equivalent of Cromptoon, Havells

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLSH copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

K.S.JITE AND SONS

M/s Asrani and sons

Parhar Enterprise

Narendra N Bhandare

J P ASSOCIATES

M/S DARSHAN ENTERPRISES