SPECIAL REPAIRS TO BLDG NO T-60, STN HQ AND P-202 CHDH OF ADM BN OF MLIRC AND PROVN OF BATHROOM BLOCK AT MLIRC BELGAUM UNDER GE BELGAUM

Amount

Dismantling of single layer Mangalore pattern or similar tiles in roofing all as specified and directed.

Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section all as specified and directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position, in un-framed work all as specified and directed.

Dismantling boarding of any description fixed in any position with nails all as specified and directed.

Dismantling wall or ceiling boards or insulation boards/ slabs of any thickness including cover fillets all as specified and as directed.

Demolition of plain cement concrete in ground floors and pavings n. exc. 15cm thick, below or above GL all as specified and directed.

Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc., all as specified and directed.

Demolition/breaking up or down PVC /Ac/CI/Cement drain pipe any size fixed in any position all as specified and directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each all as specified and directed.

Taking up or down 15mm bore steel water tubing and connections all as specified and directed.

Hacking out old broken glass (any thickness/ size, quality or description) from wooden frames, glazed with putty or fixed with beads all as specified and directed.

Surface excavation n. exc. 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in hard/dense soil all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m depth for foundation, etc. and getting out in any soil all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n. exc. 25 cm thick all as specified and directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point in soil all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for hard core with broken stone or boulders of gauge n.exc 63mm, deposited, spread, levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces all as specified and directed.

Fixing only serviceable timber scantling of any description obtained from dismantling in un-framed work all as specified and directed.

M&L for 2nd class hard wood in scantling, clean sawn fixed in unframed work all as specified and directed.

M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails or beads; sectional area exc 13 and n.exc 25 sq.cm all as specified and directed.

Fixing only serviceable timber fillets of any description obtained from dismantling, secured with nails or beads; sectional area exc 13 and n.exc 25 Sq.cm all as specified and directed.

M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde- E- 250) quality-A complete all as specified and as directed.

M&L for pre-painted galvalume coated high tensile corrugated/ trapezoidal profile steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.5mm thick (TCT), as in roofing/ cladding fixed with self drilling fasteners as per manufacturers instructions all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc.

M&L for pre-painted galvalume coated high tensile plain profile steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.5mm thick (TCT), as in roof covering/ claddings to wall, etc. fixed with self drilling fasteners as per manufacturers instructions all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc.

S&F Plain galvanised mild steel sheeting with grade of zinc coating 275, 0.8mm thick, in reidges,hips, valley gutter, drip and straight flashings at expansion joints all as specified and directed and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings all as specified and directed.

M&L for mild steel flats for wind ties for roof including securing bolts and similar works, conforming to Fe-290 Gde E-165 all as specified and as directed.

S&F PVC (SWR) eaves gutter half round/ square/ trapezoidal profile 150mm bore including pipe accessories PVC holder bats bolts nuts etc. including taking down existing unserviceable gutters of any description and size and making good disurbed surfaces all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes, single socketed, in any length, with solvent cement joints, fixed to wall or laid trenches or in floors, all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes, single socketed, in any length, with solvent cement joints, fixed to wall or laid trenches or in floors, all as specified and directed.

S&F 110mm bore PVC (SWR) bends any radius all as specified and directed.

S&F 75mm bore PVC (SWR) bends any radius all as specified and directed.

S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 all as specified and as directed.

S&F mild steel works in tubular trusses, rafters, purlins, etc. including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 dismantling the existing unserviceable mild steel members of any description and size and making good disturbed membersall as specified and as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, conforming to Fe-410-W Gde E-250, quality A, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, fastening and fixing complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 type C2, using 40mm graded stone aggregate in foundation, filling, mass concrete, levelling courses and sub bases all as specified and directed.

M&L for Reinforced cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in foundation, column footings, plinth beams, etc all as specified and directed.

M&L for use of form work to sides of concrete foundations, column footings, plinth beams and similar works for rough finished flat concrete surfaces, vertical or to batter, all as specified and directed.

M&L for use of form work to sides of pillars, posts, struts, columns, etc. for fair finished concrete surfaces, square, rectangular or polygonal all as specified and directed.

M&L for use of form work to sides and soffits of roof beams, tie beams, lintels, and similar works for rough finished flat concrete surfaces all as specified and directed.

M&L for mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.

All as described in item No.120 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.

M&L for 50mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for flooring including finishing the surface even and fair all as specified and directed.

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in sub base for flooring all as specified and directed.

M&L for 100mm thick plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for flooring including finishing the surface even and fair all as specified and directed.

M&L for machine cut Kota stone slab, 18-20mm thick, as in flooring, laid and jointed with neat slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing complete including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for machine cut Kota stone slab, 18-20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing complete including 10mm thick backing coat in CM 1:4 all as specified and directed.

M&L for 15 mm thick screed in CM 1:4 as in floors to receieve floor tiles as specified and directed.

M&L for coloured non skid ceramic tiles, edge cut, 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed.

M&L for coloured non skid ceramic tiles, edge cut, 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38Sqm, in skirting/dado, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for coloured non skid ceramic tiles, edge cut, 6 to 7mm thick area of each tile exc 0.06 Sqm but not exc 0.11Sqm, in floors. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for coloured non skid ceramic tiles, edge cut, 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18Sqm, in skirting/dado, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 all as specified and directed.

M&L for coloured glazed ceramic tiles 300mm x 200mm size, 7mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 all as specified and directed.

M&L for machine cut granite stone slab, premium quality, any colour, 18 to 20mm thick, set and jointed with neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:6 and pointed in white cement (1:2) mixed with colouring pigments to match with the shade of slab, as in partitions, platforms, steps, cills, etc. including rubbing and polishing complete all as specified and directed.

M&L for coloured polished designer cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments, set jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, pavings, etc., including dismantling of existing unserviceable stone slab/tiling alongwith cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

M&L for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base for floors including demolition of existing plain cement concrete sub base of any description and thickness and making good disturbed surfaces all as specified and directed.

M&L for plain cement concrete 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc. including demolition of existing plain cement concrete plinth protection of any description and thickness and making good disturbed surfaces all as specified and directed.

S&F 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grids of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C0, using 12.5 mm graded stone aggregate and setting in CM 1:6 including demolition of existing unserviceable PCC block masonry built in cement mortar in any position below or above ground level and making good disturbed surfaces all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6 complete all as specified and directed.

M&L for pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:4 complete all as specified and directed.

M&L for rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

Supply only approved integral water proofing compound all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed.

M&L for two coats of cement based paint, any colour, over a coat of alkali resistant primer on newly plastered surfaces of walls, pilasters, cornices, etc., including necessary preparation of surfaces all as specified and directed.

M&L for two coats of oil bound distemper over a coat of primer over 1mm thick layer of wall care putty (JK BIRLA or equivalent), on newly plastered walls, pilasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.

M&L for two coats of oil bound distemper (Acrylic distemper washable), any colour, over a coat of primer on newly plastered walls, pilasters, cornices, etc., including necessary preparation of surfaces with chalk whiting all as specified and as directed.

M&L for two coats of weather proof exterior emulsion paint over a coat of primer on surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of primer over 1mm thick layer of wall care putty, on walls, pillasters, cornices, etc., including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for two coats of oil bound distemper on ceiling, including complete removal of existing treatment and necessary preparation of surfaces all as specified and as directed.

M&L for one coat of synthetic enamel paint on old painted wooden surfaces of any description, over 10cm width or girth including necessary preparation of surfaces all as specified and directed.

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description, over 10cm width or girth including necessary preparation of surfaces all as specified and directed.

M&L for preparing surface of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil all as specified and directed.

M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for preparation of new steel surfaces not exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

M&L for aluminium frame work as in doors, partitions and windows using powder coated aluminium sections including provision of glazing clips, hinges, handles, etc including dismantling of existing aluminium joineries and making good disturbed surfaces all as specified and as directed. Notes: (i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings. (ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets. (iii) Particle board/ glass panels shall be measured and paid separately.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&FAnodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised aluminium fittings such as peg stays 150mm long(1 no)hinges type B-21 100mm long (2 no) suitable handle(1 no) complete all as spd and directed.

M&L for 3mm thick Aluminium Composite Panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick aluminium alloy PERALUMAN-100 (AlMg1-NS41) complete with all necessary sub-structures, anchors, hardware and fittings to provide a total installation, fixed to existing wooden/ steel members all as per manufacturers instructions, all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps, etc. Make: Alstrong/ Aludecor/ Alucobond/ Eurobond/ Viva Composit Panel

S&F stainless steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery with stainless steel wire staples all as specified and directed.

S&F Floor door stopper of aluminium alloy body and loungue, anodised, with hard drawn steel spring, overall length of cover plate 150mm fixed in floors complete all as specified and as directed.

S&F Door closer, of aluminium (die cast) body, hydraulically regulated, designation No 3, universal type, suitable for door shutters of weight between 61 to 80kg, all as specified and directed. Make : EVERITE/ ALLWYN

S &F Mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and as directed.

S &F Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc.complete all as specified and as directed.

S&F brass knobs, 40mm dia fixed with nut and screw and washer all as specified and directed.

S&F brass knobs, 20mm dia fixed with nut and screw and washer all as specified and directed.

S&F 15mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in floors all as specified and directed.

S&F 20mm bore galvanized iron tubes, medium grade, with all fittings, fixed complete to walls, ceilings or laid in floors all as specified and directed.

S&F 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors all as specified and directed.

S&F 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors all as specified and directed.

M&L for 25 mm bore UPVC water supply pipes, 10kgf/ sqcm, including all fittings such as elbow, reducer, tee, couplers, short pieces, connectors etc. fixed to walls, ceilings with PVC batten holders, all as specified and as directed.

S&F 25mm bore gun metal gate valve heavy duty ISI marked with iron wheel head screwed both ends to iron pipes and fixed all as specified and as directed

S&F vitreous china wash basin, white, size 550x400mm, including CI brackets and cutting for and pinning in ends of brackets or erecting stands etc. all as specified and directed.

S&F in repairs 15mm bore angle stop valves, brass chromium plated, fancy type, high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.

S&F 15mm bore stop valves, brass chromium plated, fancy type, screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.

S&F PVC connection 15mm size with PTMT nuts, 450mm long all as specified and directed.

S&F syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, fixing bolts, etc, connecting to drain pipe and flushing pipe all as specified and as directed.

S&F in repairs 15 mm bore 2 way Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed. Make: Continental series of JAQUAR or equivalent model in JOHNSON/ CERA

S&F in repairs health faucet, brass chromium plated with 1m long flexible PVC tube and wall hook all as specified and as directed. Make: Continental series of JAQUAR or equivalent model in JOHNSON/ CERA

S&F in repairs waste pipes of suitable dia for Urinal outlets as specified and directed.

S&F in repairs Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 105gms) as specified and directed.

S&F 15 mm bore Bib tap, long body, brass chromium plated, fancy type with wall flange, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F in repairs, Vitreous China urinal, bowl type, flat back/ corner wall, 465 x 355 x 265mm size (minimum), white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including provision of grating and union for discharge pipe, 15mm bore PTMT urinal spreader, waste pipe, (excluding flushing cistern, flush pipe) all as specified and as directed.

S&F in repairs 20mm dia brass chromium plated towel rail, 'D' type, 600mm long between flanges all as specified and as directed.

S&F in repairs UPVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet all as specified and directed.

Cutting, chases for concealed water tubing and making good in CM 1:3 cutting not exceeding 10 cm girth in brick/ PCC block wall all as specified and directed.

S&F in repairs 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down existing unserviceable pipes of any description and size and making good disurbed surfaces all as specified and directed.

S&F in repairs 110mm bore UPVC (SWR) bends any radius with access door all as specified and directed.

M&L plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in coping, bed blocks, benching in channels, eves filling between wall and tile/ sheet roofing including necessary form work all as specified and directed

M & L for Solid PVC frame (Single Rebated) of size 60 x mm 30 mm made out ofsolid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitablemetal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note: Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) all as specified and directed

M & L for Factory made solid PVC profiled panel door shutter 28 mm thick with integral skin as frame & 3 mm thick high pressure compact laminate on both side of approved colour as infill with 'C' type GI or 40x20x19 of MS pipe as stiffner and fixing in frame at site as per specifications and drawing all as specified and directed

M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on single side reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing all as specified and as directed.

M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed

S&F MS butt hinges 100mm in size, medium weight, cold rolled all as specified and directed.

S&F aluminium handle, 'D' type, anodised 150 mm in size all as specified and directed.

S&F aluminium anodised barrel tower bolt 100mm size all as specified and directed.

S&F aluminium anodised barrel tower bolt 150mm size all as specified and directed.

S&F in repairs 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and directed.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene beading in square n. exc 0.5 sqm in each pane all as specified and directed.

M & L for 4mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene beading in square n. exc 0.5 sqm in each pane all as specified and directed.

M&L for 5.5mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene beading in square n exc 0.5 sqm in each pane all as specified and directed.

M&L for 5.5mm thick sheet glass ordinary quality and glazing with oil putty/ neoprene beading in square exc 0.5 sqm in each pane all as specified and directed.

M&L for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tank, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted and fixed in position including dismantling andtaking down existing unservceable tank of any description complete all as specified and directed.

S&F in repairs 25mm dia PTMT ball valves high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe all as specified and directed.

Cutting into exiting manholes for connecting new drain making good to pipe and rendering cutting out (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth furnished and forming benching as required for 110 mm dia pipe all as specified and directed.

Taking down carefully existing point wiring of light/ fan/ bell/ 5 Amps socket/ 15 Amps socket/ 2 way light point, etc. complete of any description including fittings and fixtures such as switches, sockets, ceiling roses, pendants, holders, regulators, call bells, light fittings, etc. and making good the disturbed surfaces of walls, floors, etc. all as specified and directed.

M&L for Point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded cables drawn through and including ISI marked PVC casing capping of suitable size and all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volt grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including 2nd class HW board fixed on wall with sunmica top for mounting switches/ sockets etc. for one light point controlled by one switch 1 way complete all as specified and directed.

All as described in item No. 98 but for one fan/exhaust point controlled by one switch and regulator.

All as described in item No. 98 but for one one call bell point controlled by one bell push.

All as described in item No. 98 but for one 05 Amps socket outlet on independent board.

All as described in item No. 98 but for one 05 Amps socket outlet on the same board with other switches.

All as described in item No. 98 but wiring with 2.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable and with one run of single core PVC insulated FRLS unsheathed 1100 volt grade multi-stranded copper conductor cable of size 2.5 Sqmm for earth continuity conductor and connecting to common earth dolly, complete for one 15 Amps power socket point on independent board all as specified and directed.

M&L for sub main wiring with 2 runs of single core PVC insulated FRLS unsheathed multi-stranded copper conductor cables of size 6 sqmm drawn through and 1100 volt grade including PVC casing and capping of suitable size with all necessary fittings and provision of one run of 6 sqmm PVC insulated FRLS unsheathed multistranded copper conductor single core for earth continuity and connected to common earth dolly, including taking down existing unserviceable sub main wiring of any description and making good disturbed surfaces complete all as specified and directed. Note: Two runs of 6 sqmm cable, one run of 6 sqmm earth conductor cable and one run of PVC casing and caping shall be measured and paid together as one unit length.

S&F modular switch, piano type, 5 Amps, flush button, 230 volts, AC, one way all as specified and directed.

S&F modular bell push type AC 230 Volts, 5 Amps all as specified and directed. Make:Anchor or equivalent

S&F modular switch piano flush type 15 Amps 230 volts all as specified and directed.

S&F modular socket outlet 5 Amps 2 cum 3 pin flush type multipurpose all as specified and directed.

S&F modular socket outlet 15 Amps cum 3 pin 5 Amps cum , flush type multipurpose all as specified and directed.

S&F in repairs PVC ceiling rose 3 terminal suitable for 230 volts AC supply all as specified and directed.

S&F in repairs fan regulator electronic step type suitable for 1200/1400 mm sweep ceiling fan all as specified and directed.

S&F in repairs call bell, ding dong, 230 Volts AC supply all as specified and directed.

S&F MCCB TPN 125 Amps ,25KA, 415 Volts, AC supply, fixed thermal magnetic settings, all as specified and as directed.

S&F MCB DP 63A 10KA 'C' series 50Hz AC supply all as specified and as directed.

S&F MCB DP 40A 10KA 'C' series 50Hz AC supply all as specified and as directed.

S&F MCB SP 5-32A 10KA 'C' series 50Hz 240 Volts AC supply all as specified and as directed.

S&F surface mounting LED light fitting, 20W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, 20W LED strip, integrated driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block and provision of 2 Nos. of PVC square blocks all as specified and directed. Make: HAVELLS LUMILINE PLUS or equivalent in CG/ Philips/ Wipro

S&F surface mounting LED light fitting, 10W, 230V, wall/ ceiling mounted type, with extruded aluminium housing and polycarbonate diffuser, 10W LED strip, integrated driver and all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block and provision of 2 Nos. of PVC square blocks all as specified and directed. Make: HAVELLS LUMILINE PLUS or equivalent in CG/ Philips/ Wipro

S&F in repairs 34 Watts LED glare free luminaire recess mounted in square profile 2ft x 2ft size with 34 W high brightness SMD LEDs including electronic driver etc. complete with all accessories internally pre wired connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block all as specified and directed. Make: HAVELLS VENUS NEO HE 2x2 or equivalent in CG/ Philips/ Wipro

S&F 25 Watts LED security light fitting, with pressure die cast aluminium housing and lens embedded PC cover having top opening separate driver compartment with IP66 protection, 25 Watts high power LEDs, electronic driver including all accessories internally pre wired complete and connecting up light fitting with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block including provision of bracket made out of GI pipe light grade of suitable size and length and bent to shape fixed to walls/ poles with suitable MS clamps, bolt, nuts etc. complete all as specified and directed. Make: ENDURA PEARL model of HAVELLS or equivalent in Crompton Greaves/ Philips/ Wipro

S&F in repairs energy saving surface mounted, decorative oval bulk head edge-lit LED luminaire 10W, comprising of high brightness LEDs. comprising of high brightness LEDs complete with all accessories internally pre wired complete including provision of 10 Watts high brightness LEDs 6000K, suitable size PVC/ wooden board with sunmica top and connecting up light fitting with and including twin core twisted flexible copper conductor cable of suitable size from ceiling rose to connector block complete all as specified and directed. Make: Havells ENDURA RUGBY NEO - IP65 or equivalent in Crompton Greaves/ Philips/ Wipro/ C&S

S&F wall mounting fan, 450mm sweep, 230/240 Volts, single phase, metallic body with louvres and fixing arrangements with fixing bolts testing including making good disturbed surfaces to match with existing surfaces all as specified as directed. Make: Havells or equivalent model in Almonard/ Crompton Greaves

S&F in repairs exhaust fan, 300mm sweep, 230/240 Volts, 900 RPM, heavy duty, single phase, metallic body with louvres and fixing arrangements with fixing bolts and provision of 3 core flexible copper conductor cable of size 1.5sqmm size from ceiling rose to connector of exhaust fan and testing including making circular hole of suitable in brick masonry wall and making good disturbed surfaces to match with existing surfaces all as specified as directed. Make: Havells Venti Air DX model or equivalent model in Almonard/ Crompton Greaves

S&F ceiling fan, 230 volts, single phase, 1200mm sweep, 3 blades five star rated efficient type and provision of suitable size down rod with all accessories complete including taking down existing unserviceable ceiling fan of any description and size and depositing to MES E/M store all as specified and as directed. Make: HAVELLS Model No. ES-50 or equivalent model in makes CG/ ORIENT

M&L for 50mm dia GI pipe medium grade cut to required length as per site requirement and fixed into walls in single piece without any joints as in supports for hanging of ceiling fans complete all as specified and directed.

S&F in repairs Sheet metal enclosure type Triple pole and neutral vertical Load line DBs are fitted with Bus Bars, Neutral Links, Blanking plates (without MCCB) V-TPN 4 way with double door type and includingprovision of 2nd class hard wood board with sunmica all as specified and as directed.

S&F in repairs Sheet metal enclosure type Single pole and neutral DBs are fitted with Bus Bars, Neutral Links, Blanking plates (without MCB) 12 way with double door type and includingprovision of 2nd class hard wood board with sunmica all as specified and as directed.

S&F in repairs Single pole and neutral enclosure, powder coated, with a two pin earth plug and socket complete, 20 Amps, 240V, including provision of one single pole MCB 20 Amps 'C' curve type all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5m below normal ground level connected to GI wire 4mm dia (7.5m long) by means of GI bolts nuts washers and GI wire protected by 15mm dia light grade GI pipe (7.5m long) and watering arrangements with 20mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule Part I including necessary excavation and earth work in any type of soil, charcoal, dust salt, PCC 1:2:4 type B1 in chamber, 40mm thick RCC 1:2:4 type B1 in cover slab with 8mm dia TMT bars at 100mm C/C both ways and with 8mm dia MS hook complete and testing all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric LT UG cable with multi-stranded aluminium conductor, 1100 Volts grade, cross sectional area 35 Sqmm x 4 core, laid in trenches/ passing through pipe/ duct or fixed to wall including provision of necessary lugs/ thimbles/ ferrules, connecting up , testing and commissioning complete laid in repairs all as specified and as directed. Note: Excavation, earth work, cable cushioning, bricks/ GI pipe for protection shall be measured and paid separately under relevant items of this schedule.

M&L for double wall corrugated HDPE pipes, conforming to IS 14930-2001, ISI marked, 63mm outer dia, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches/ under roads/ crossing etc. all as specified and as directed.

M&L for GI tubes, light grade, 40mm bore, as in cable protection, fixed to poles/ walls with necessary MS clamps, bolts, nuts, washers or laid in trenches / under roads/ crossing etc. all as specified and as directed.

M/s B C CHOUGULE

M/s. KIRAN M CHOUGULE

M/s. VIJAY ELECTRICALS

OM INFRA