Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.8 LAccepted-AOC | 1 | Accepted-AOC Being lowest | |
| 2 | 2₹15.9 L+₹73,111 (4.81%)Rejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹16.9 L+₹1.7 L (11.1%)Rejected-Finance 32 H I G AWAS VIKAS COLONY SECTOR 3 BODLA AGRA UP 282007 | AGRA | AGRA | UP | 282007 | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹18.7 L+₹3.6 L (23.4%)Rejected-Finance | 4 | Rejected-Finance Not being lowest |
Tender Value
₹24.2 L
EMD Value
₹48,440
Closing Date
30 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE AGRA
112, TAJ ROAD, AGRA CANTT
SPL REPAIR TO CERTAIN ROADS AT 509 ABW UNDER GE (EAST) AGRA
2024_MES_663255_2
84336/E8
Open Tender
Civil Works
Item Rate
180 days
AGRA
MES contractors enlisted for Class E and above and category a(v) for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work
8 documents required · 8 mandatory
₹500
GE EAST AGRA
₹48,440
3 Dec 2024
2 Sept 2024
7 Oct 2024
2 Sept 2024
30 Sept 2024
16 Sept 2024
2 Sept 2024 - 9 Sept 2024
Amount
Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths but making good by applying tack coat @ 5 Kg / 10 Sqm putting permixed bituminous macadam well ramming and sealed with binder 9.8 Kg per 10 Sqm blinded with 0.09 cum o stone chipping 6.3 mm size and again well rammed (including supply premixed macadam binder and chipping) depth of pot holes exc. 30 mm complete all as specified and directed..
M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom & finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying a priming tack coat with bitumious primer using paving bitumen of grade VG-10 at the rate 5 Kg per 10 Sqm for laying premixed bituminous carpet / bituminous macadam sq metrecomplete all as specified and directed.
M&L for laying bituminous premix semi dense asphaltic concrete with using mechanicl paver 30 mm thick consolidated thickness with using 5.5 % binder content by weight of total mix, (paving bitumen VG-30) rolled and compacted with 8 to 10 tonnes power vibrator road roller to achieve the required camber and gradient complete all as specified and directed. Note :- (a) Premix concrete shall be mixed in hot mox plant by using design mix and transported from plant to work site and laid / spread by means of mechanical paver. (b) Contractor shall quote his rate on this basis of binder as mentioned in above item if there is any variation in the actual binder content used, the rate shall be adjusted lower side of binder used however no price adjustment shall be made if the binder content works out to more than as specified and directed.
M&L for preparation of road surface and applying thermoplastic reflective paint for marking of minium 2.5 mm thick single coat as a centre line or edge line etc road marking of 150/100 mm width using 'HOT MARK' thermo plastic paint (Hot application white/yellow by indenous modern propelled road marking machine) as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, inter filler etc, thermoplastic reflective paint shall meet the MORTH specification including spraying of glass beads etc all as per manufactures instructions complete all as specified and directed.
S&F in repair solar cat eye aluminium alloy shall (100% water proofing design accordingl to 65) of size 125 mm x 125 mm x 25 mm (shank 65 mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 watt one NI-ed rechargeable battery (1.2 V/ 1600 MA) consisting of super bright LED with 10,000 to 18000 mcd completed as per mnaufactures instructions etc complete all as specified and directed.
Excavating in trenches n.exc 1.5 m wdie and n.exc. 1.5 m in depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n. exc. 10 Sqm on plan and n.exc. 1.5 m in depth in soft / loose soil and getting out all as specified and directed.
M&L for returning filling in including spreading levelling watering and well ramming in layers n. exc. 25 cm as in soil complete all as specified and directed.
M&L for removing excavated material n. exc. 50 m and depositing where directed at a level n. exc. 1.5 m above the starting point with soil complete all as specified and directed.
S&F in repair PVC (SWR) pipes single socketed 200 mm bore, including bend, shose, Tee Y, as required etc in any length with rubber ring joints laid in trenches etc complete all as specified and directed.
S&F in repair framed work such as grills, gratings, etc with ends bars shouldered and / ro riveted, or forged into spikes, framed guard bars, barred irion doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work coforming to Fe 290 Gde-E-165 etc complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paitn over a coat of red oxide zinc chrome primer complete all as specified and directed.
Dismantling of interlocking tile of any thickness in floor / paving in any depth etc complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n. exc. 15 cm thickness (below or above ground elvel) etc complete all as specified and directed.
M&L hard core of broken stone or boulder having gauge n. exc. 63 mm, desposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring / hard standing finishing surface even and rough using broom finish complete all as specified and directed.
M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.
M&L for Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand;complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using (20 mm graded stone aggregate) as in side support of path or retaining walls any thickness, plinth protection / coping / bonding etc of any szie and shape etc complete all as specified and directed.
Demolition of reinforcement concrete of any description and in any position etc complete all as specified and directed
M&L for providing precast cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) (nominal mix) for cover slab with plane faces set in CM 1:6 complete all as specified and directed.
S&F TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.
C P Singh and Co (BID ID -3108219)
m/s shanti consruction co (BID ID -3108469)
M/S OMKAR SINGH YADAV (BID ID -3108388)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .