PERIODICAL SERVICES TO CERTAIN BUILDINGS AND REPAIR/ REPLACEMENT OF CHEQUERED TILES INTER LOCKING PAVER BLOCK, NON-SKID/ VITRIFIED TILES, ROAD SIGN/ROAD SIDE FURNITURE DRAIN AND DRAIN COVER AT RAKSHA VIHAR, VIGYAN VIHAR, ADRDE COLONY, CDA AND AGE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified & directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed.

M&L Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified & directed.

M&L Machine pressed precast conctete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade complete all as specified & directed

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified & directed.

M& L Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed with grey cement and pigment in neat cement slurry in floors laid over & including 20mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L dark Colour Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified & directed

M&L Light Colour Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified & directed

M&L Joint Free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified & directed

M&L Joint Free Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified & directed

M&L 25 mm thick plain Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base finishing the surface even and fair complete all as specified & directed.

M&L for taking out old sign board and providing new sign board including earth work PCC in foundation etc & with the following specification as under :- (i) S&F Stainless Steel hollow section 50mm dia,medium weight 02 Nos 2.45M, heigh as in post 2 Nos 0.84M & 2 Nos 0.98M for board for sign boards including cutting tops to shape as directed, drilling holes,etc complete. (ii) S&F Stainless Steel plain sheets 1mm thick as in sign board and similar work, cut to size, making holes punched included round hearted screw or rivets and fixed to Stainless Steel framing with plain 40mm lap joints with revetted or welded seams, including bending or turning up mitred angles etc as required complete. (iii) S&F coloured luminous acrylic PVC film (sheet) self adhesive of blue colour on Stainless Steel surface of boards etc complete. (iv) M&L for coloured luminous acrylic PVC strip,logo, letters or figures (Block, Roman, italic or Indian) with coloured luminous acrylic PVC film self adhesive, fixed on boards etc complete all as directed

M&L 75 mm thickCement concrete type D- 2, 1:4:8 (40mm graded stone aggregate) as insub base the surface finished even and fair complete all as specified & directed.

M&L 75mm thick Cement concrete type C-2, 1:3:6(40mm graded stone aggregate) including necessary form work as in Plinth protection, surface finished even & fair complete all as specified & directed.

Demolition of brick work or stone boulder built in cement mortar including all quoin, arches, pillars etc complete all as specified and directed

M&L brickwork with subclass 'B' old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) cast in situ as in coping /benching including necessary formwork complete all as specified and directed.

Taking down cement or cement lime plaster of any description/ layer on brick or stone wall including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick/stone or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed

M&L for preparing of new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whitening complete all as specified and directed

M&L for preparation of new plaster surfaces and applying two coats of exterior emulsion paint over a coat of Alkali resitant wall primer complete all as specified and as directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified & directed Note : Grooves shall be measured & paid seperately.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified & directed.

M&L for Dholpur stone 16 to 18 mm thick cladding gang saw cut with machine cut edges, uniform colour of each stone size not exceeding 0.25 Sqm fixed over and including 5 to 6 mm thick layer of adhesive of chemical laticrete 290 all edges at front face of each slab chamered to provid V group ( appx 5 mm deep) at facing side of wall/ cladding, polishing , rubbing & incl silicon treatment over 10 mm thick cement mortar plaster in CM 1:4 and finished the plaster rough complete all as specified and directed.

Dismantling of mild steel sign board of any description (size exc 2 sqm but n.exc 4.50 sqm) including steel post/struts any section including demolition of PCC foundation and removing debris away from the site complete all as directed

M & L cement concrete type B-2 (1:2:4) (using 40mm graded stone aggregate) for embedding post complete all as specified and directed.

Demolition of RCC (reinforced cut as required to facilitate to demolition) of any description and in any portion not otherwise specified and directed

M&L for precast cement concrete 1:2:4, type B1, (using 20mm graded stone aggregated) as in cover slab for manholes septic tank etc (set in cement mortar 1:4) all as specified and directed Note: Reinforment shall be measured and paid separately.

M&L for providing 10 mm dia TMT bar and over cut to length, bent to shape required, cranking and binding with mild steel (annealed) wire not less than 0.9mm dia complete all as specified and directed

All as per item No 30.00 above but 8mm dia as in stirrups and spacers/binder or in slab/covers

M&L for preparation of old decorated wall surfaces including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing moulds moss efflorecent salt and trading oil and greasy spots and applying one coat of white wash on wall complete all as specified and as directed

All as per item No 32.00 above but applying one coat of white wash on ceiling.

M&L for washing/rubbing down and stopping of distempered, plastered and painted surfaces of wall including cornices etc and making good of filling holes and applying one coat of distemper oil-emulsion (OBD) all as specified and directed

M&L Complete removal of existing treatment of wall including cornices etc and making good of filling holes and applying two coat of distemper oil emulsion (OBD) over a coat of primer all as specified and directed

M&L for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed

M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and as directed

M&L Complete removal of existing treatment of wall including cornices etc and making good of filling holes and applying two coat of cement base paint over a coat of alkali resistant priming paint all as specified and as directed

M&L French polishing on wooden and wood base surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one coat of french polish all as specified and as directed

M & L obliterating old writing of any description, n exc 0.10 sqm with paint to match existing work complete all as specified and directed

M & L writing letters in figures (Block, roman, etalic & Indan) n. exc 30 cm high complete all as specified and directed

M & L for preparation of old painted surfaces of any description over 10 CM girth or width not otherwise described and applying one coat of plastic emulsion paint complete all as specified and directed

M & L for applying 3mm thick wall care putty on wall to obtain even and smooth surface including making good any undulations on new/old surfaces complete all as specified and directed

M&L for preparation of old plaster surfaces and applying two coats of exterior emulsion paint complete all as specified and as directed

M&L for 15mm thick plastering on fair faces of brick wall or concrete surface in CM 1:6 finished even and fair all as specified and directed

M&L for rendering 15 mm thick in CM1:4 on any surfaces of brick or concrete surfaces, finished the surface even and fair with using WPC @ 3% by weight of cement and rendering to be finished even smooth and surface with out using extra cement complete all as directed Note-WPC shall be measured and paid separately

Supply only integral waterproofing compound

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces of ceiling finished the surface even and smooth wiothout using extra cement complete all as specified & directed

M&L for preparing New plastered or unplastered surfaces of ceiling & applying three coats of white wash complete all as specified as directed

M&L for preparation of new or previously untreated surface of wall incl cornices plastered surfaces by brooming down and applying two coats at cement base paint complete all as specified and as directed.

M&L for preparation of new or previously untreated plastered surface of wall and applying three coats of white wash complete all as specified and as directed.

M & L applying two coats of oil bound distemper over a coat of primer on new plastered surfaces of wall including preparationo of surfaces complete all as specified and directed

Sree Ram Enterprises

M/s Salim Mohomad

R.S BUILDERS

GAURAV ASSOCIATES

M/S RISHI RAJ AGRAWAL

PD GUPTA AND COMPANY

VISHESH BUILDERS