Providing 8x85 Watt Integrated Solar Panel LED lights on 11 Mtr. Long High Mast Poles in various parks, Sector-14P-II at Hisar. Including maintenance and defect liability period of 5 years for all items free of cost. Rate taken in DNIT are excluding

Job Work Supply, installation, testing and commissioning of integrated Solar Panel LED Lighting System with 8 Nos., 85 Watt lighting luminaires on 11 mtr. High Mast Pole having total light power of 680 Watt conforming to the following specifications and features :- Solar Panel :- Solar Panel Type : Mono-Crystalline Solar Panel Capacity : 18 V, 110 Watt Charging Time : 3 to 4 hours with advance technology. Solar Panel Size : 1470 x 360 mm Life Span : )25 years Conversion Efficiency : )18% Controller :- MPPT, 15A, IP67, Automatic light and time control, overloading/discharging protection, reverse connection protection, wireless / remote controlled system for manually ON/OFF of the light. Battery :- Battery Type : 12.8 Li-Fe, PO4 Lithium Iron Capacity : 48AH Nominal Voltage : 12.8 V Over Charge Voltage : 14.4 V Discharge Voltage : 11.2 V Discharge cycles : 1200-1500 Time )18% Operating Temp. : -150C to 600C LED Light Source :- LED Light Power : 8x85W = 680W LED Chip Make and Quality : Philips 3030 Light Efficacy : 155-165 Lm/W Total Lumen :- Colour Temperature : 6000-6500K, Cool white Light Beam Angle : 1200 Life Span : )50000 working hours Light Body Material : Alluminium Alloy Light Body Dimensions : 1480 x 390 x50 mm Light Working Time During Night : 13 Hours 11 Mtr. High Mast Pole :- 11 mtr. long High Mast Pole manufactured from BSEN 10025 or equivalent grade material in single section, hot dip galvanized inside and outside in single dip, suitable for wind velocity as per IS:875, Port-3 suitable for 8 Nos. luminaire loading alongwith standard accessories supplied by the manufacturer complete in all respect upto the satisfaction of the Engineer-In-Charge with top/botton dia, sheet and galvanizing thickness as under :- Thickness of Top and Bottom section = 4mm Top Dia = 150mm, Bottom Dia = 360mm Thickness of galvanizing Top = 65 micron (minimum) and Bottom = 85 micron (minimum) Foundation :- RCC foundation of M25 grade (1 cement : 1 Stone aggregate : 2 Coarse sand) including excavation, steel re-inforcement (Fe 500 ) @ 75 kg/cum of concrete contents, concrete cover 40mm over a bed of PCC 1:5:10 of required dimension for high mast polygonal Pole complete in all respect and as per the direction of the Engineer-In-Charge as per following specifications :- 1. RCC foundation suitable for 11 mtr. High Mast Pole 2. PCC base of size 210x210x6 cm 3. RCC base of size 200x200x40 cm 4. RCC column of size 60x60x160 cm 5. Steel Re-inforcement (Fe 500) @ 75 kg/cum Round Bracket :- Ring type round bracket made of GI pipe of 65mm dia (Nominal, medium, gange) suitably designed for fixing 8 Nos. integrated Solar Panel LED Light luminaires complete in all respect upto the entire satisfaction of the Engineer-In-Charge. (Excluding GST)