GE S U 61 2021 22 REPAIR TO DRAIN PATH, COMPOUND WALL AND OTHER MISC WORK IN MD ACCN OF BIKRAM ENCLAVE AND OFFICE AREA OF THE NODE UNDER AGE BR II GE SOUTH UDHAMPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and fair complete all as specified and as directed.

M&L for glazed coloured ceramic tiles in dado/vertical surface (600mm x300mm x 7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for Non ceramic coloured skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.

M&L for (300mm x300mm)x6 to 7 mm thick coloured non-skid ceramic tiles as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

M&L for vitrified ceramic coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Ditto as per Item No 7 but on vertical surfaces as in skirting complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured and paid separtely)

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound as per latest IS specification complete all as specified and as directed.

M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying two coats of cement base paint after preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying two coat of oil bond distemper on walls after preparation of old decorated plastered surfaces complete all as specified and as directed.

M&L for applying one coat of cement base paint after preparation of old plastered surfaces complete all as specified and as directed.

M&L for applying one coat of white wash on old decorated plastered surfaces of ceiling after preparation of surfaces complete all as specified and as directed.

Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 10mm thick Screed bed in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric five layred APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitument 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm, complete all as specified and as directed by Engr-in- Charge.

M& L PCC 1: 5 : 10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified and as directed.

Demolition of Brick or stone masonry built in cement mortar complete all as specified and as directed.

Excavation in trenches n.exc. 1.5 m wide and n.exc. 1.5 m in depth for foundation, side of drain, wall and similar work etc, and area n.exc.10 Sq.m on plan and getting out in hard/dense soilcomplete complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to a distance exc 50m and n. exc 1.50 km out side defence land complete all as specified and as directed.

M&L Brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius built in type CM 1:6 complete all as specified and as directed.

All as per srl item No 28 above but except brick only. complete all as specified and as directed.

M&L Brick work with sub class 'B' brick, straight or curved on plan exc 6m mean radius built in half brick thick wall built in CM 1:4 complete all as specified and as directed.

M&L for walling of random rubble masonary, rectangular coursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed.

M&L for hand packing with broken stone or boulders (any thickness) at back of wall over arches etc and rising (or lowering) to the required level complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble masonary coursed or un coursed in CM (1:3) complete all as specified and as directed.

Extra over stone walling for hammer dressing 20mm to face to sand stones and dressing to face stone and dressing of face beds and joints, as specified, of randon rubble walling, uncoursed or brought upto courses complete all as specified and as directed.

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (20 mm graded crushed stone aggregate) using in beams, cantilevers, bressummers, lintels over 1.5 mtr span and similar work etc complete all as specified and as directed.

M&L form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc complete complete all as specified and as directed.

M&L Mild TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to, TMT bars complete all as specified and as directed.

Ditto as per Item No.37 above but 6mm dia and over upto and including 8mm dia in stirrups, spaces and binders complete all as specified and as directed.

M&L for rendering 5 mm thick in CM 1:3 on exposed surface of concrete finsihed even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving n exc 15 cm thickness below and above ground level and as in floor complete all as specified and as directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded crushed stone aggregate) in foundation complete all as specified and as directed.

M&L for plain cement concrete1:2:4 type B-2 using 40 mm graded crushed stone aggregate as in channels and drains, foundation and similar work etc complete all as specified and as directed.

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping,kerb, benching and similar work etc including necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in bond stone set in cement mortar complete all as specified and as directed.

S&F for PVC (SWR) pipes(110mm dia) single socketed in any length with rubber joints laid in tranches, floor and similar work complete all as specified and as directed.

M&L for 100 mm thick plain cement concrete type 1:4:8 D-2 (using 40 mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B1( using 20mm graded crushed stone aggregate) 100mm thick as in floor, complete all as specified and as directed by Engr-in-charge.

M&L for chequered cement concrete (glossy finish)tile 300 mm x 300 mm x 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry in floor including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for chequered cement concrete (glossy finish) tile, 300 mm x 300 mm x 35-40 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floor including 20 mm thick screed bed incement mortar 1:6 complete all as specified and as directed.

M&L for 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in level course on floor etc complete all as specified and as directed.

M&L for vitrified coloured heavy duty (Dura stone) 300 x 300 x 10mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling vrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed by Engr-in-Charge.

S & F concertina coil 500mm dia and 150mm prolong fixing to any type of standard rails including screwing in position complete all as specified and as directed.

Dismantling post or struts (wood,steel or RCC) any section including taking out embedded portion and making good disturbed ground, post embedded in natural ground complete all as specified and as directed.

Excavation in post holes each not exceeding 0.50 cum getting out, returning filling in and well ramming earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50 mtr and making good disturbed surfaces as in hard/dense soil complete all as specified and as directed.

M&L for framed work such as doors, gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including ornament and intricate design, including pintle hings, stops hand made sliding bolts etc conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L for hand rails, half rounded or other stel section, posts and struts in fencing incl cutting tops to shape as directed, water tank staging with guard cover, purline and rafter work, incl drilling holes, notching for wire incl all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed.

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia bars with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts ,including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins complete all as specified and as directed.

Restraining resecuring only existing galvanised barbed wire any type and any height including making good staples complete all as specified and as directed.

S&F Chian link MS Galvanised fencing any size or type including line wire, any mesh size and type to any type of standards rails, straining bolts, etc including provision of binding wire complete all as specified and as directed by Engr-in-Charge

M&L Round bars 10mm dia and over, cut to length, bent to shape required, including bending,hooking ends, with mild steel wire not less than 0.9mm dia or securing with clips quality conforming to Fe-290 Gde E-165 as in chian link fencing complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends , each screwed ends to be fitted with washers and one hexagonal or square nut, length exc 5 cm but n exc 10 cm dia of neck 11 to 15mm complete all as specified and as directed.

Dismantling of AC sheets (corrugated and semicorrugated etc ) in roofing incl ridge tiles complete all as specified and as directed.

S&F for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and as directed.

M&L for preparation of new steel surfaces of any descripton not otherwise described over 10 cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide on steel surfaces complete all as specified and as directed.

M&L for providing 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulaton boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

AC designer composite ceiling board 4mm thick in 600mmx600mm panel confirming to IS-14682 type-B category-3 including GI frame work with size of grid 605x605mm for seemless ceiling comprising of GI perimeter , holdfast & suspenders and all accessories complete all as specified and as directed by Engineer-in-charge.

Dismantling asbestos cement (corrugated , semi corrugated etc) sheets as in roof covering complete all as specified and as directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F 6mm thick asbestos cement corrugated sheet in roof with two corrugation side lap fixed with J or L hooks complete all as specified and as directed.

M&L for PCC 100 mm thick type1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base, complete all as specified and as directed.

M&L for chequred cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floor with grey cement and pigment complete all as specified and directed.

M&L 60mm thick pressed precast concrete interlocking tiles/paver blocks any shape & size and glosy finish top surface with Grey cement and pigement confirming to IS 15658-2006 of M-35 grade laid over 50mm thick sand cushioning with grey cement or mixed with pigment as directed by Engr -in-Charge.

Providing, pre-cast cement concrete 1:2:4 type B-1 (using 20mm crushed stone graded) as in kerb stones and in similar works bedded and jointed in cement morter 1:4, complete all as specified and as directed by Engr-in-Charge.

khajuria builders

MODI CONSTRCUTION COMPANY

sohtra and co

S K BROTHERS

M/S GURBACHAN SINGH

M/s LAL DAYAL CONSTRUCTION CO

PARDEEP SHARMA